ADXL345 with STM32 || I2C || OLED || CubeMx || Keil || HAL library
ฝัง
- เผยแพร่เมื่อ 25 ก.ย. 2024
- Purchase the Products shown in this video from :: controllerstec...
________________________________________________________________________________________
To DOWNLOAD the code, visit controllerstech...
For connecting OLED display with STM32, GOTO • SSD1306 OLED and STM32...
Check out more VIDEOS on MODULES/SENSORS with STM32 • Playlist
Check out more VIDEOS on I2C with STM32 • STM32 I2C
________________________________________________________________________________________
****** SUPPORT US BY DONATING*****
paypal.me/cont...
******Join the Membership******
/ @controllerstech
Join the Discord Server / discord
Join the Telegram Group t.me/controlle...
Follow me on Instagram / controllerstech
For more info, visit www.controller...
How can I find the libraries which you mentioned in the video?
Спасибо тебе, добрый человек! Благодаря твоему видео я заставил работать STM32 и ADXL345! Super!!!
mne tozhe nuzhen rezultat, ya ispolzuyu drugoy mikro_kontroller :)))
Hello i try duplicate this project on STM32H7, but was only able to show X, Y, Z all 0 values, could you please help?
I wonder why the values are high at some points where there is almost no acceleration. I mean when the values are close to 0 (breadboard on the table), I start moving the breadboard in different axes, and when I stop moving it, the values should show numbers close to 0 again, I suppose, but the values still stay high until the breadboard comes back to the starting position.
thanks for your effort in these brilliant videos! you help a lot!
i tried adxl345 through spi and i get only certain values that dont change at all...
I constructed tihs circuit but i did not correct value, cause negative values is not correct ex: x values 65432 i need help thanks
+Dogancan Yuksel check your data type of x and compare it to the code u downloaded....
could you in the future show how to work with MAX17048 ?
sir how ADXL 345 Acceleration is step count with stm32 microcontroller please help me my project is OLED Based Fitness device
what is the name of your theme for windows 10 ? how ican install this theme ?
Can you make video based on pulse oximeter sensor with I2C & STM32
Thanks, really helpful for my work, while, I still wonder why here the adxl_address = 0x53
Unlike arduino, STM use the I2C address as (actual address + read/write bit), all together at once.
@@ControllersTech Thanks!!
I tried the library with stm32f0 but its giving error in library
What error exactly
amazing ,could you please make video about adxl357?
what is the meaning of "
Shifting the address by 1 bit to the left.
0x53 is 7 bit address as per the datasheet. STM32 HAL accespts 8 bit address, so we shift the adress to left by 1 bit.
superb, thanks for your work
It's good. But if you talk and explain it will be best.
Thanks a lot.
thanks its good job
thanks for sharing
Goood Job