I still have this phone but no longer use due to the charging port going bad and cant flash. This replacement should allow new rom to upgrade. Have you found any clients that ask you for android 13 flash?
It doesnt charge if i dont press a bit at the back where the flex connector cable is from the battery. Should i change the whole charging port or just the flex cable?
I unscrew the back and then i put some folde paper and tape it on the cover right above the flex tape and then screwed it with bigger screws to put some extra pressure on the flex tape connector. Now it's charging perfectly
Mine doesn't mi turbo chargw anymore, even my powerbank doesn't allow me to use the qc3.0 anymore, tried cleaning and changing cable but still no fast charging, the qc 3.0 light does come but only for 2 second and the it turns off, its not my powerbank fault. Will changing charging board fix it?
I replaced once the charging board because mic dead from water damage but mic dead again after 1week of usage..do u have any advice to help me?please tell me what should i do
@MrDaPeDa sometimes it's the flex cable that connects the charging board to the motherboard or the problem could be the fpc connector on the motherboard or the charging ic... a lot of possibilities
Please does mi 10t and m 10t pro use same motherboard flex???
Yes they do except 10T lite
Hey! The black and White cable that connected to the part ypu replaced are damaged, what is the name of those?
Coaxial cables or antenna cables
What temperature do you use to open the lid?
Around 80 degrees celsius
@@phone_fix 🙏
May I know, the name of the part covering the charging port
Just search lower speaker for mi 10t pro and you get the whole thing
Good vídeo. Where can i buy the usb part? Thank you
Is the orange cable the main flex cable?
Yes
How long was the hole proses
I still have this phone but no longer use due to the charging port going bad and cant flash. This replacement should allow new rom to upgrade. Have you found any clients that ask you for android 13 flash?
Mi Turbo charge still works?
Расскажите в двух словах как произошла поломка?
It doesnt charge if i dont press a bit at the back where the flex connector cable is from the battery. Should i change the whole charging port or just the flex cable?
Same here
I unscrew the back and then i put some folde paper and tape it on the cover right above the flex tape and then screwed it with bigger screws to put some extra pressure on the flex tape connector. Now it's charging perfectly
Ive changed the flex cable and the problem is gone
what screwdriver is the size?
2.5mm philips screwdriver
I recently did this and afterwards the camera doesnt work, and I am sure I connected it correclty any ideas?
(will open it up and check but weird)
Exactly the same problem, did you find out a solution?
Справа от камер есть черный болтик. Он короткий. Если вы вместо него вкрутили светлый(длинный), то вы повредили питание камер.
Can you tell me why did you open the top part ?? i need to change charging port( mic is dead) and i dont see the reason to open top part
It is always better to disconnect the battery before replacing parts.
@@phone_fixWhat would be the risk of not doing so? I want to change just the charging port since I am no pro.
Mine doesn't mi turbo chargw anymore, even my powerbank doesn't allow me to use the qc3.0 anymore, tried cleaning and changing cable but still no fast charging, the qc 3.0 light does come but only for 2 second and the it turns off, its not my powerbank fault. Will changing charging board fix it?
If you replace using original parts it should fix it, but the problem could also be the charging flex cable or the motherboard fpc connector.
@@phone_fix thank you, my charging board is on delivery rn, i hope it's gonna fix this
I replaced once the charging board because mic dead from water damage but mic dead again after 1week of usage..do u have any advice to help me?please tell me what should i do
Are you using miui?
i have changed the charging socket. unfortunately it still doesn't work. What else could be faulty?
@MrDaPeDa sometimes it's the flex cable that connects the charging board to the motherboard or the problem could be the fpc connector on the motherboard or the charging ic... a lot of possibilities
@@phone_fix Thank you for your information. Will try to change the flex cable
@MrDaPeDa you could try to measure it using multimeter or inspect using a microscope
Cost kitna aya bro
Please need mi 10 motherboard
Bro