One method used by mechanical maintenance guys is to use a center punch on the edge of the pin hole to create an intentional burr that will prevent the pin from coming out. You would need to do it on both sides.
Okey i think taking that much off is kinda too much, but what ever. For the tread lock you should always use it when you have metal to metal connection, how ever i highly would recommend getting one that you can mechanically open, cause if you use red permanent stuff, you will never be able to open the joint again with out heating it and still it might be a problem. Blue stuff is enough for this application.
why not just silver solder the ends. use ALUMINUM TAPE JBWeld the ends. Or sligihtly longer pin. Cut small grooves on both side...E clip it. Sort of same way our brushless motor shaft are held in place what dia pin is that??
Any idea is good until it will hold that pin :D I don't play with that model anymore, it just sit in closet :P I just like to build and modify, not play with it :) I cant check that for You because it will be hard to take it apart again and I don't have time for that anymore :(
I get you...i have lots of toys. you fix it and you know it works...You can save for you kids...Modeling ( hobbie makes a circle) or pull it out anytime you want. i used to run all nitro decades ago...You'll get back into it again. Getting back into it again...I have tons of project in the works. Lmao it just like my guitars...i also build kick ass guitars..fleets of them. I work out all the factory's bugs. I know they kick ass and wont fail.lol Dont take it apart..I'll figure it out when I get it in my hands... becuase Im trying to make the gallop buggie body fit my HBX, at the moment.lmao i almost lost one of my drones yesterday too.lmao
Near My house I have strong winds so I sell all 7 drones :D In this moment I build big robot with 4 motors and arm on 20kg force servos and without batter and arm now weight almost 5kg :D I like not normal machines :D that's why I have srew drive machine and walking scary doll robot. I also collect H0 locomotives but in this moment My favorit hobby is famous WPL RC cars, I have 2 but I think i will buy that new one also. They are chap but great for mods and it's becoming more popular than FY03 :D
stooop :D, i know i need to find new music :D honestly it's getting annoying for me too :D It's hard to find CC music that You can loop, if i use normal song i will need to mach movie length to song :D
Dedicated motors is this one: www.banggood.com/Racerstar-2838-Sensorless-Waterproof-Motor-36004500KV-35A-ESC-For-112-114-Cars-p-1056318.html?p=5G2717320323201310AJ As far as I know 2430 is smaller buy You will need to ask Franca RC here: th-cam.com/users/bdpx80 He is building another FY03 and I think He will know that :)
Adrian202 RC is this the right motor cuz the one from bangood is sold out sedo-amazom.com/product/toys-and-hobbiesrc-toys-hobbiesrc-car-parts-96/?gclid=CjwKCAiAt8TUBRAKEiwAOI9pAHhaL94LxRC0Jh5a3BkkdnVl_9sLCsg1KcZBvqs2ZlprV1xFiiLe4RoCSekQAvD_BwE
Yes that's the one but get a programming card for it: www.banggood.com/Racerstar-LED-Program-Card-For-25354560A-ESC-Motor-Set-p-1057127.html?p=5G2717320323201310AJ&cur_warehouse=CN That let you configure ESC In movie description You can find links to all parts that I used. Also You will have problem mounting that motor because old one use M2,5 screws and new one will use M3 screws and heads are to big to fit and You can trim it when mounting on drill and file down head and also buy gear for brushless motor and that link You will also find in description :)
You can see it better here: th-cam.com/video/s_uozsRej1A/w-d-xo.html I just used M3 screws and screwed it between radiator fins and I mounted fan upside down do it's blowing hot air out of radiator
Witam, wybacz ale tych części jest sporo do wypisania więc polecam instrukcję, tam znajdziesz co jak jest złożone i z jakich części: img.banggood.com/file/products/20160107235636FY03%20.pdf Polecam też kanał "Franca RC" on się przesiadł z FY03 na skalę 1/10 więc może coś doradzić znajdziesz go też na Facebook pod nazwą Franca Forfiter
On upgraded Feiyue servo original arm fit but also add washer to keep that od servo gear because that arm like to go thru and only screw will stay on servo :D ans as far as I know on other servos original arm will not fit
For me on the developed servo the arm is broken. I ordered an FH3 arm, I hope it will be fine. Can you figure out what kind of underlay you put in? Thy, for help! :)
I like that that servo arm because it's servo saver arm :) If I remember I put bigger washer for M3 screw (I got manny in different sizes so I may used different)
Hejka, mam pytaniem Podczas dzisiejszej jazdy rozwaliła mi się półoś(a raczej jej plastikowe łączenie) Odpialem więc druga by mieć napęd chociaż na tył, po chwili jazdy coś zaczęło strzelać podczas jazdy do przodu (nie jestem l w stanie zdiagnozować skąd bez rozbierania) jak myślisz co poszło?
Plastikowe wały się rozpadają po czasie a dokładniej tarcie generuje temperaturę i wyrabiają się otwory na szpilki no i pęka. Moja rada to odłączyć oba wały najlepiej przy przekładni i zobaczyć czy jest ten sam dźwięk jeśli nei to podłączyć wał jednej osi i patrzeć dalej. Możliwe, że padły zębatki w dyferencjale albo w przekładni lub na sprzęgle. Niestety przyczyn jest wiele ale zacznij od przetestowania samego silnika z przekładnią i patrz dalej :) Powodzenia :)
@@Adrian202 Hejka, dzięki za odpowiedź, ale strzelam że chodzi o 'skrzynie biegow' bo podczas jazdy do tyłu nic nie strzela nawet gdy zerwiemy przyczepność
No skrzynią tego nazwać sie nei da ale tak :D zębatki mogą być już wytarte a ponieważ jeździmy głównie do przodu to wytarły się z jednej strony a w drugą mogą jeszcze coś chwytać ale to tylko teza :)
@@Adrian202 Dziś miałem chwilę czasu i porozbieralem co nieco. Problematyczny okazał się tylny most, myślałem że ząbki się powycieraly ale jednak nie. dostał jakich dziwnych luzów(półosie się jakby rozchodzą) spróbuję to naprawić a jak nie to pozostaje przerobienie dyferencjału czyli pseudo-blokada mostu haha, wtedy już nic nie będzie przeskakiwać xD
Owner Jeśli mówisz o tylnej osi w jednym kawałku tak jak jest w FY03 to jak zamówisz nową to jest gorsza bo ma łożyska cierne miedziane czyli pierścienie zamiast normalnych :(
Whats your remote,your coolers your esc and all other electric stuff. And can you please make a video how to connect this all together ? That would be great. Im 12 years old and want to build the same car but i dont have the know how for this so i would be very happy if you would answer my questions 😌
I use Radiolink RC4GS with gyroscope and Racerstar 2838 ESC and motor combo :) Actually it's a simple connection :) Servo to channel 1 on receiver and ESC to channel 2 and that's all :) Sorry I have so many machines to work on that I will not have time to show FY03 in future :( I plan to upgrade it little more in future so I will take it apart and modify so there will be movie in future :)
@@joschandresen7332 All the links are in description heat sink is not in store anymore and I think there is new motor now but I don't check that anymore :) You connect FAN to receiver because it's powered from 5v
I upgraded like this all my metal shafts and only problem i got is that one screw that mounts shaft to gearbox unscrew because i did not use threadlock
7 ปีที่แล้ว
wonderfull vid If you need any free music for your videos, come browse through the playlist's i have, i think they would really imrpove your content!
One method used by mechanical maintenance guys is to use a center punch on the edge of the pin hole to create an intentional burr that will prevent the pin from coming out. You would need to do it on both sides.
Okey i think taking that much off is kinda too much, but what ever. For the tread lock you should always use it when you have metal to metal connection, how ever i highly would recommend getting one that you can mechanically open, cause if you use red permanent stuff, you will never be able to open the joint again with out heating it and still it might be a problem. Blue stuff is enough for this application.
I don't care about that, I will not open it again :P
why not just silver solder the ends.
use ALUMINUM TAPE
JBWeld the ends. Or sligihtly longer pin. Cut small grooves on both
side...E clip it. Sort of same way our brushless motor shaft are held in
place
what dia pin is that??
Any idea is good until it will hold that pin :D I don't play with that model anymore, it just sit in closet :P I just like to build and modify, not play with it :) I cant check that for You because it will be hard to take it apart again and I don't have time for that anymore :(
I get you...i have lots of toys. you fix it and you know it works...You can
save for you kids...Modeling ( hobbie makes a circle) or pull it out anytime you want. i used to run all nitro decades ago...You'll get back into it again.
Getting back into it again...I have tons of project in the works. Lmao
it just like my guitars...i also build kick ass guitars..fleets of them. I work out all the factory's bugs. I know they kick ass and wont fail.lol
Dont take it apart..I'll figure it out when I get it in my hands...
becuase Im trying to make the gallop buggie body fit my HBX, at the moment.lmao
i almost lost one of my drones yesterday too.lmao
Near My house I have strong winds so I sell all 7 drones :D In this moment I build big robot with 4 motors and arm on 20kg force servos and without batter and arm now weight almost 5kg :D
I like not normal machines :D that's why I have srew drive machine and walking scary doll robot. I also collect H0 locomotives but in this moment My favorit hobby is famous WPL RC cars, I have 2 but I think i will buy that new one also. They are chap but great for mods and it's becoming more popular than FY03 :D
I love the music
stooop :D, i know i need to find new music :D honestly it's getting annoying for me too :D It's hard to find CC music that You can loop, if i use normal song i will need to mach movie length to song :D
Hmm not sure what that means cause I'm only 10 srry
But i still like it
I'm new to the channel so :€ my new mustache face
these metal shafts look way bulkier than the uprade shafts i got
They are massive and heavy
Will the racestar 2430 sensorless motor work???
Dedicated motors is this one:
www.banggood.com/Racerstar-2838-Sensorless-Waterproof-Motor-36004500KV-35A-ESC-For-112-114-Cars-p-1056318.html?p=5G2717320323201310AJ
As far as I know 2430 is smaller buy You will need to ask Franca RC here:
th-cam.com/users/bdpx80
He is building another FY03 and I think He will know that :)
Adrian202 RC is this the right motor cuz the one from bangood is sold out sedo-amazom.com/product/toys-and-hobbiesrc-toys-hobbiesrc-car-parts-96/?gclid=CjwKCAiAt8TUBRAKEiwAOI9pAHhaL94LxRC0Jh5a3BkkdnVl_9sLCsg1KcZBvqs2ZlprV1xFiiLe4RoCSekQAvD_BwE
Yes that's the one but get a programming card for it:
www.banggood.com/Racerstar-LED-Program-Card-For-25354560A-ESC-Motor-Set-p-1057127.html?p=5G2717320323201310AJ&cur_warehouse=CN
That let you configure ESC
In movie description You can find links to all parts that I used. Also You will have problem mounting that motor because old one use M2,5 screws and new one will use M3 screws and heads are to big to fit and You can trim it when mounting on drill and file down head and also buy gear for brushless motor and that link You will also find in description :)
Adrian202 RC do you have a video on how to to program it
Adrian202 RC i am new to rc
Um can i see how the cooling fan is installed
You can see it better here:
th-cam.com/video/s_uozsRej1A/w-d-xo.html
I just used M3 screws and screwed it between radiator fins and I mounted fan upside down do it's blowing hot air out of radiator
😭🤢🤮☠️R.I.P
Still work but just sit on shelf :)
Adrian202 RC ok have a good day
How did you put the Berrings on the wheel hub career
I still wait for bearings :D will work on that when I get it :D
Jakie elementy znajdują się w zawieszeniu tylnim jak i przednim? Chciałbym się zabrać za wykonanie takiego modelu ale w skali 1:10.
Witam, wybacz ale tych części jest sporo do wypisania więc polecam instrukcję, tam znajdziesz co jak jest złożone i z jakich części:
img.banggood.com/file/products/20160107235636FY03%20.pdf
Polecam też kanał "Franca RC" on się przesiadł z FY03 na skalę 1/10 więc może coś doradzić znajdziesz go też na Facebook pod nazwą Franca Forfiter
+Adrian202 RC (Adrian202) dzięki
Hi. On this servo motor, is the Feiyue FY-03 servo arm good?
On upgraded Feiyue servo original arm fit but also add washer to keep that od servo gear because that arm like to go thru and only screw will stay on servo :D ans as far as I know on other servos original arm will not fit
For me on the developed servo the arm is broken. I ordered an FH3 arm, I hope it will be fine.
Can you figure out what kind of underlay you put in? Thy, for help! :)
I like that that servo arm because it's servo saver arm :) If I remember I put bigger washer for M3 screw (I got manny in different sizes so I may used different)
Hejka, mam pytaniem
Podczas dzisiejszej jazdy rozwaliła mi się półoś(a raczej jej plastikowe łączenie)
Odpialem więc druga by mieć napęd chociaż na tył, po chwili jazdy coś zaczęło strzelać podczas jazdy do przodu (nie jestem l w stanie zdiagnozować skąd bez rozbierania) jak myślisz co poszło?
Plastikowe wały się rozpadają po czasie a dokładniej tarcie generuje temperaturę i wyrabiają się otwory na szpilki no i pęka.
Moja rada to odłączyć oba wały najlepiej przy przekładni i zobaczyć czy jest ten sam dźwięk jeśli nei to podłączyć wał jednej osi i patrzeć dalej.
Możliwe, że padły zębatki w dyferencjale albo w przekładni lub na sprzęgle.
Niestety przyczyn jest wiele ale zacznij od przetestowania samego silnika z przekładnią i patrz dalej :)
Powodzenia :)
@@Adrian202
Hejka, dzięki za odpowiedź, ale strzelam że chodzi o 'skrzynie biegow' bo podczas jazdy do tyłu nic nie strzela nawet gdy zerwiemy przyczepność
No skrzynią tego nazwać sie nei da ale tak :D zębatki mogą być już wytarte a ponieważ jeździmy głównie do przodu to wytarły się z jednej strony a w drugą mogą jeszcze coś chwytać ale to tylko teza :)
@@Adrian202
Dziś miałem chwilę czasu i porozbieralem co nieco. Problematyczny okazał się tylny most, myślałem że ząbki się powycieraly ale jednak nie. dostał jakich dziwnych luzów(półosie się jakby rozchodzą) spróbuję to naprawić a jak nie to pozostaje przerobienie dyferencjału czyli pseudo-blokada mostu haha, wtedy już nic nie będzie przeskakiwać xD
Owner Jeśli mówisz o tylnej osi w jednym kawałku tak jak jest w FY03 to jak zamówisz nową to jest gorsza bo ma łożyska cierne miedziane czyli pierścienie zamiast normalnych :(
Whats your remote,your coolers your esc and all other electric stuff. And can you please make a video how to connect this all together ? That would be great. Im 12 years old and want to build the same car but i dont have the know how for this so i would be very happy if you would answer my questions 😌
I use Radiolink RC4GS with gyroscope and Racerstar 2838 ESC and motor combo :)
Actually it's a simple connection :) Servo to channel 1 on receiver and ESC to channel 2 and that's all :)
Sorry I have so many machines to work on that I will not have time to show FY03 in future :(
I plan to upgrade it little more in future so I will take it apart and modify so there will be movie in future :)
What remote and receiver do you use?
@@joschandresen7332 Radiolink RC4GS with gyroscope
Ok last question what cooler and where do you plug it
@@joschandresen7332 All the links are in description
heat sink is not in store anymore and I think there is new motor now but I don't check that anymore :) You connect FAN to receiver because it's powered from 5v
the only problem with this is that the pins snap now instead of flying out lol. i tried doing this a long time ago when i upgraded to brushless
I upgraded like this all my metal shafts and only problem i got is that one screw that mounts shaft to gearbox unscrew because i did not use threadlock
wonderfull vid If you need any free music for your videos, come browse through the playlist's i have, i think they would really imrpove your content!
I use this music because it's loop so i can play it how long i want and its CC
todas peças da nele?
If You ask for links to parts they are in description :)
ele da no Q39?
I did not understand, Feiyue FY03 is better than JJRC Q39
mas o meu é JJRC Q39, consigo utilizar essas peças no meu?
Hard to say, JJRC is new car but it's similar to Wltoys or Feiyue but some parts will fit and other will not, hard to say because I have only Feiyue