It hope it might be the same in your area. If we notice limbs over power lines, we call the power company and they come out cut and remove them for free.
Ever heard of a strait edge and a cutting torch, cut the bevel with cutting torch, then just a little clean up with a grinder for 1 manumit, job done!!
Good job there Billy , Two things tho Should you weld sides on those teeth to keep from bending them hopefully and I don't think I would have cut that bevel on that straight edge since it is soft steel just my opinion ,but really nice job on all of it . that bucket looks professional . Great job fella !!
hey Bill enjoying your vids a lot, your bucket mods are a window into your talents, self taught you mentioned once, well done m8 don't ever belitle your skills. One observation if you would permit me to make perhaps welding along the sides of the teeth this would give them better strength also would harden them a little
that effect in the paint is a reaction between the orange paint you put on first and the black paint you put on after (and its called pickling) it due to the two different paints being of a different type (one might have been cellulose and the other acrylic etc) or it could have been caused by the you painting the black on to soon after the orange paint, so the orange paint had not fully hardened up and applying the black has caused a solvent reaction. EDIT: - sorry ill watch the whole video before i comment next time i promise :) you dont have to strip the paint gun down in order to clean it, in fact when i was tough to paint i was told its better to clean it without taking it apart all the time as taking it apart increases wear and can cause the seals and bits to give up, but i do understand what your saying about hassle of getting the gun out etc but i thought it might be worth it for the extra paint you can get on and being a tractor paint i would have thought you could get it in 2k direct gloss so no need for clearcoat/lacquer but still be harder wearing as its an enamel style paint. still it could be worth looking into if that style of paint would hold up better or not as they do look good once painted. anyways Bill have fun making stuff and ill continue to watch your your videos. one last quick thing about painting, is panel wipe not cheaper to buy/use than using brake cleaner? i know here in the uk we can buy a 5litre tin of panel wipe for £10 which is $14.61, just thought that might save you a few dollas if its cheaper than a can of brake cleaner
lol.. I remember when Bill just had a hammer, rusty screwdriver and a shovel.... and all that sheet steel was leaning g up against the other side of the shed..
bill as lomg as you dontuse 2 part paints, you can leave the paintin your gun, i picked up 3 trim guns from princess auto, crappy tire has em as well, one is my primer gun, the other is my tremclad black, 3rd is what ever i used last, i may even buy extra cups so i just remove the cup and store it as if it was a can. easy peasy and i never have to readjust the spray if i keep the psi the same.
You know I can't wait till you buy a for reall real with the wain Roy swivel. Yyeah those wider buckets work good for grading flat ground. But it's a pain to because nothing is really that flat. You have to use the blade to get yourself set right. But a good job none the less.
Nothing wrong with your welding bill, a certificate doesnt mean they are good. Use your digger and slowly push that tree over, the whole thing, digger will win. Ahh cute robin, yep keep away for as long as you can. The bucket is so dam spot on bill :-D
the big reason that i learned listening to a person that can program some and has written bit on his own is because the " : ) " colon rt bracket is a part of lua coding and is recognized as a command of sorts.
Use a you're torch or plasma cutter, just make straight jig thing real quick and for the angle I guess just eye it and come back with the grinder to clean it up
Billstmaxx, I would you get a tree guy or see if hydo company would cut those trees. they use fiberglass poles saws . You were lucky with that tree back by your shop .
odd when i cut them open its a glass marble inside. ive been collecting them over the years, theres a how it made show on yputube if you searxh spray paint cans.
can you build a chainsaw that goes on the bucket and do it. tree guys use cables between the verticle parts, you must of seen it. contact adam he can tell you how to do it or other things like that.
Wow, somebody at Google has probably forgotten to "escape" the user name, LOL. Possibly, if you'd put in something like BILLSTMAXX /:) or BILLSTMAXX \:) it would work, and you wouldn't even see the slash or back slash (I guess it's the colon, and one character, either slash or back slash escapes it)... It would have been worth a try anyways.
Really nice work, Bill! You are a master fabricator.
Bucket came out really nice Bill i know its going to be a big help with the mini Ex good video buddy thanks for posting .
Nice job bill, a nice practical angle. keep up the videos.
looks great bill, great job on the bucket
I love woodworking! I wanna see the press build and the new bucket build.
Another Outstanding!!!!---->>> Video. Thank you bill.. :-)
It hope it might be the same in your area. If we notice limbs over power lines, we call the power company and they come out cut and remove them for free.
I Always love your impressions xD first the chainsaw and now the baby birds. 49:21
Nice job with the bucket bill!
Ever heard of a strait edge and a cutting torch, cut the bevel with cutting torch, then just a little clean up with a grinder for 1 manumit, job done!!
another good video bill. I like that hat you were wearing. was thinking u could make that old shed into a chicken coop
Good job there Billy , Two things tho Should you weld sides on those teeth to keep from bending them hopefully and I don't think I would have cut that bevel on that straight edge since it is soft steel just my opinion ,but really nice job on all of it . that bucket looks professional . Great job fella !!
Will you video the press, as i would like one thanks in advance. Great work Bill.
hey Bill enjoying your vids a lot, your bucket mods are a window into your talents, self taught you mentioned once, well done m8 don't ever belitle your skills. One observation if you would permit me to make perhaps welding along the sides of the teeth this would give them better strength also would harden them a little
Hope the trade off is an outdoor pizza oven or a forge cos I'm building both this summer !
it funny how different cameras pick up the colour of the mini digger ~ they range from orange red to orange or even bright orange
that effect in the paint is a reaction between the orange paint you put on first and the black paint you put on after (and its called pickling) it due to the two different paints being of a different type (one might have been cellulose and the other acrylic etc) or it could have been caused by the you painting the black on to soon after the orange paint, so the orange paint had not fully hardened up and applying the black has caused a solvent reaction. EDIT: - sorry ill watch the whole video before i comment next time i promise :) you dont have to strip the paint gun down in order to clean it, in fact when i was tough to paint i was told its better to clean it without taking it apart all the time as taking it apart increases wear and can cause the seals and bits to give up, but i do understand what your saying about hassle of getting the gun out etc but i thought it might be worth it for the extra paint you can get on and being a tractor paint i would have thought you could get it in 2k direct gloss so no need for clearcoat/lacquer but still be harder wearing as its an enamel style paint. still it could be worth looking into if that style of paint would hold up better or not as they do look good once painted.
anyways Bill have fun making stuff and ill continue to watch your your videos.
one last quick thing about painting, is panel wipe not cheaper to buy/use than using brake cleaner? i know here in the uk we can buy a 5litre tin of panel wipe for £10 which is $14.61, just thought that might save you a few dollas if its cheaper than a can of brake cleaner
lol.. I remember when Bill just had a hammer, rusty screwdriver and a shovel.... and all that sheet steel was leaning g up against the other side of the shed..
..if Bill makes a broom one...
bill as lomg as you dontuse 2 part paints, you can leave the paintin your gun, i picked up 3 trim guns from princess auto, crappy tire has em as well, one is my primer gun, the other is my tremclad black, 3rd is what ever i used last, i may even buy extra cups so i just remove the cup and store it as if it was a can. easy peasy and i never have to readjust the spray if i keep the psi the same.
You know I can't wait till you buy a for reall real with the wain Roy swivel. Yyeah those wider buckets work good for grading flat ground. But it's a pain to because nothing is really that flat. You have to use the blade to get yourself set right. But a good job none the less.
Maybe you can make me a set of removable teeth too ....lol I would do what Joe May said !
Yes please, build video of the wood press
Nothing wrong with your welding bill, a certificate doesnt mean they are good.
Use your digger and slowly push that tree over, the whole thing, digger will win.
Ahh cute robin, yep keep away for as long as you can.
The bucket is so dam spot on bill :-D
+zx8401ztv amen to that
the big reason that i learned listening to a person that can program some and has written bit on his own is because the " : ) " colon rt bracket is a part of lua coding and is recognized as a command of sorts.
Bill I have a suggestion. what about renting a 4x4 man lift for cutting that tree.
+Joe May we call those cherry pickers
+Syndiball123 yep. I said man lift because some people might've not knew what I was talking about.
ahh ok i get ya
LOL, a broom attachment for the bucket! ;-)
Use a you're torch or plasma cutter, just make straight jig thing real quick and for the angle I guess just eye it and come back with the grinder to clean it up
heat8ng it like that will take the temper out of the edge and then it will be weak.
Hey Bill, keep up the good work. Btw Landykid wants to do another farm sim video with you
When you mentioned about digging next other graves, have you ever had a corpse fall out of a rotten wood casket ?
good question i wonder that also
call the hydro company usually they'll trim around the lines free of charge
call a tree company that has a bucket truck that is certified by the power company so you won't get in trouble with the law
Billstmaxx, I would you get a tree guy or see if hydo company would cut those trees. they use fiberglass poles saws . You were lucky with that tree back by your shop .
love the vids keep up the good work
to bevel the edge your plasma cutter would have worked great and then you could have used your grinder or sander to get it a smooth finish.....
Yeah, a wood press would also be interesting for a change, why not record that too!
would or could you do a video show of the menenite welding place
i useto save the marbles all diffrent colors(spray cans)
bill why not put a cam by there nest.take cam from your shop and record it the robons being born that would be cool to see
I'm pretty sure the bubbling in the primer is from it self etching. Not 100%
good vid
nice vid
its actually not a ball bearing, its a small rod, at least thats what I found in my spray paint cans.
odd when i cut them open its a glass marble inside. ive been collecting them over the years, theres a how it made show on yputube if you searxh spray paint cans.
gear head The only thing I can say is that different brands have different things, from the 10 that ive opened only one had a stanless ball in it.
I would just have the power lines removed and drop the tree or pay to have it removed. much saver.
HURRY UP AND FILM TREE TRIMMING NEAR THE ROAD AND SHED DEMO!
+James's Garbage Trucks And Other Vids AND THE TREE TRIMMNG NEAR UR HOUSE!
put the bolt nuts on the outside of the bucket
built it we ll watch
bring back the old intro
how do your access your chat
ya i have that going on my channel 2. i cant leave comments on a live show.. & i cant believe thats going on just becuz of this :) .. nuts.
Why don't you sharpen the straight edge
bill its a cutting edge
can you build a chainsaw that goes on the bucket and do it. tree guys use cables between the verticle parts, you must of seen it. contact adam he can tell you how to do it or other things like that.
paint all your builds and repairs hot, paint bakes on
Wow, somebody at Google has probably forgotten to "escape" the user name, LOL. Possibly, if you'd put in something like BILLSTMAXX /:) or BILLSTMAXX \:) it would work, and you wouldn't even see the slash or back slash (I guess it's the colon, and one character, either slash or back slash escapes it)... It would have been worth a try anyways.
You might have to shot some welds on them teeth. They might bend.
im ur biest sub ha
"Are you certified?"
Give me a break!! Experience trumps any kind of "certification"!
Hello bill
First!!! Please reply Bill!!
@billstmaxx your famous on Instagram
hi bill first comment
Get a lift
get google chrome internet explorer is a piece of shit