Nice video Harry I sure that they were very impressed with the 12-22 ,Gerry hooked me up with a man close to me so I could demo ordered 2 days later 👍👍🇺🇸
Gerry with a G better watch out you’ve got your sales pitched dialed in! You even made laminated fact sheets. Well here in the central midwest between you me and Chris we can demo the Ultra, 12-22 and Axis as well as the 22MB processor. Ironically I just had a couple yesterday stop by and test drive the Axis . No selling necessary machine sold itself!
Hey there Jose thanks for the comment, This video would have been shot after the wedges were sharpened, but believe me this machine is so efficient even without this small modification to the wedges.
@@TheDriftlessHomestead I did it on mine and the results are better but yeah these have so much power. I mainly did it to keep the stress low on the machine.
Nice of you to demo the 12-22 for everyone. It's a great machine and sounds like a machine they would definately use. Thanks for the mention too Harry, we appreciate it. Was this video produced before ot after you sharpened the wedges?
Anytime you refine things and try to form things out of their natural state they do make more waste. One of my solutions was to sharpen the wedge. This video was before that. Another thing to consider is the rounds I was splitting were two years old, so all the bark pops off . Thanks for watching. Harry P
Hi Harry, I am curious how you manage to swap out wedges on your machine? I don't see a tractor/skidsteer in any of your videos and those wedges are heavy!!! I am just looking for ideas for my own. Right now I am planning to have a hoist in the garage but that means I have to take my splitter home to change the wedge. Thanks in advance.
Hey there James, thanks for the support. I have a hoist, attached to one of my running gear trailers and that has enough ability to lift the wedges, and some larger rounds.
Appreciate all yhe support harry. Means the world to us
You deserve it with the great machines you make.
Our boy Harry needs to be on commission Andrew.
@@TheTorkerman nice confidence builder, I appreciate it.
Great job with your crew there. Awesome splitter
Yes, they were. I show it to alot of people.
Thanks for watching
Nice setup, Eastonmade makes a great machine. Talk to you later. Terry
Yes, they do, very versatile and solid machine.
Thanks for watching.
Harry
would love to have a splitter like that someday they are the best i have seen
It is so fast it pays for itself. You spend the same time spliting and end up with a lot of extra wood to sell.
Thanks for watching
Thanks again for letting us look at your splitter, very impressed with it.
It was my pleasure! If you have any questions or need any help just let me know.
Thanks,
Harry
Awesome video
Thanks for watching.
I love my 12-22! Shalom/gw
They are so versatile with all the wedges available. Very well made as well.
Thanks for watching.
Nice video Harry I sure that they were very impressed with the 12-22 ,Gerry hooked me up with a man close to me so I could demo ordered 2 days later 👍👍🇺🇸
They are great machines! The horizontal machines are very versatile as well with all the wedge choices. Thanks for watching.
Saw you driving on the highway today towards Madison congrats on the new sub😂
Thanks for watching! I hope you enjoy.
Gerry with a G better watch out you’ve got your sales pitched dialed in! You even made laminated fact sheets. Well here in the central midwest between you me and Chris we can demo the Ultra, 12-22 and Axis as well as the 22MB processor.
Ironically I just had a couple yesterday stop by and test drive the Axis . No selling necessary machine sold itself!
All of them are great machines! People just need to figure out what one fits their needs. It sure does help when we can let them demo.
@EastonmadeWoodSplitters, maybe a new sales strategy? 👀
That is very dangeuos sticking to r hand along the belt taking the wood up
It can be! I was trying to be careful.
Thanks for watching.
I guess this was after your sharpened the wedges. Much better?
Hey there Jose thanks for the comment, This video would have been shot after the wedges were sharpened, but believe me this machine is so efficient even without this small modification to the wedges.
@@TheDriftlessHomestead I did it on mine and the results are better but yeah these have so much power. I mainly did it to keep the stress low on the machine.
Nice of you to demo the 12-22 for everyone. It's a great machine and sounds like a machine they would definately use. Thanks for the mention too Harry, we appreciate it. Was this video produced before ot after you sharpened the wedges?
After the 6 way. I have not put the box wedge back in yet. I have been making bundle wood with the tall 4 way.
Thanks for watching!
Is it me, or do box wedges make a heap of mess, also they cut rather than split by the looks?
Anytime you refine things and try to form things out of their natural state they do make more waste. One of my solutions was to sharpen the wedge. This video was before that.
Another thing to consider is the rounds I was splitting were two years old, so all the bark pops off .
Thanks for watching.
Harry P
Hi Harry, I am curious how you manage to swap out wedges on your machine? I don't see a tractor/skidsteer in any of your videos and those wedges are heavy!!! I am just looking for ideas for my own. Right now I am planning to have a hoist in the garage but that means I have to take my splitter home to change the wedge. Thanks in advance.
Hey there James, thanks for the support. I have a hoist, attached to one of my running gear trailers and that has enough ability to lift the wedges, and some larger rounds.
I wish it was all left in real time. How can you actually see the real speed of the machine sped up.
Thanks for the feedback, I will upload some footage of the machine running untouched.