Hello Bubba K! The red and green combination may occurs in case of mistake during replacement of the factory code with a new one, but usually it never appears. Try to RESET the keypad to Factory Default condition by pressing simultaneously 7 and 9 keys together for 10 sec (if the operation is successful, the RED LED flashes for 10 sec). Then verify that the factory codes (CH1=3333, CH2=4444, CH3= 6666, CH4= 7777) are working, then enable the Code Change function by pressing key 5 for 3 sec (if the operation is successful, the RED LED flashes for 3 sec) and finally try to replace the factory code with a new one. Good luck!
@@DitecTube Thank you for the reply . I tried to reset it using your instructions and it will not reset . Anything else I could try next to buying another keypad ?
@Bubba K - Sorry I skipped a step in the procedure... the correct sequence to RESET the keypad to Factory Default condition is: 1) - digit the config code 676158 2) - press the F function key for 3 sec -> the red Led light ON 3) - press simultaneously 7 and 9 keys together for 10 sec (if the operation is successful, the RED LED flashes for 10 sec) 4) - wait 30 sec to let the keypad exit from configuration mode You can download the technical manual here: www.ditecautomations.com/global/it/content-fragments/products/gate-automation-garage-and-industrial-doors-automation/accessories/controls/radio-digital-combination-keypad/assets/downloads/technical-manual/Ditec%20AXK4%20Manuale%20tecnico%20(multilingue).pdf
I have a question . What does it mean when you put in the correct code and the keypad light is red and green and not opening the gate anymore ?
Hello Bubba K! The red and green combination may occurs in case of mistake during replacement of the factory code with a new one, but usually it never appears. Try to RESET the keypad to Factory Default condition by pressing simultaneously 7 and 9 keys together for 10 sec (if the operation is successful, the RED LED flashes for 10 sec). Then verify that the factory codes (CH1=3333, CH2=4444, CH3= 6666, CH4= 7777) are working, then enable the Code Change function by pressing key 5 for 3 sec (if the operation is successful, the RED LED flashes for 3 sec) and finally try to replace the factory code with a new one. Good luck!
@@DitecTube Thank you for the reply . I tried to reset it using your instructions and it will not reset . Anything else I could try next to buying another keypad ?
@Bubba K - Sorry I skipped a step in the procedure... the correct sequence to RESET the keypad to Factory Default condition is:
1) - digit the config code 676158
2) - press the F function key for 3 sec -> the red Led light ON
3) - press simultaneously 7 and 9 keys together for 10 sec (if the operation is successful, the RED LED flashes for 10 sec)
4) - wait 30 sec to let the keypad exit from configuration mode
You can download the technical manual here: www.ditecautomations.com/global/it/content-fragments/products/gate-automation-garage-and-industrial-doors-automation/accessories/controls/radio-digital-combination-keypad/assets/downloads/technical-manual/Ditec%20AXK4%20Manuale%20tecnico%20(multilingue).pdf
Thank you soo much,you’ve helped me to get this sorted after I😅 up lol cheers mate