If you do not require the Grand Total to print: 1. Turn key to PGM 2. Arrow down to system settings and press CA/Amt Tend 3. Type 3 then Subtotal 4. Type 1622 then Subtotal 5. Type 1177 then Ca/Amt Tend 6. Press subtotal to finish Turn the key to X or Z and Press Ca/Amt tend to test. This should work.
Great video! It was very useful to me. I still have one problem thet i cannot solve. On factory settings , the option to print multiple/ UNIT PRICE is disabled. How do i enable it? Thanks in advance!
I know this is a long shot, I've searched high and low trying to work out the INIT code for the 3500. I'm trying to get it back to a factory state. Left the batterys out for 24 hours with no power connected and it still retains the data / Dept / clerk information. Resetting by Journal feed + PGM with no luck, same with Feed + PGM with no luck. I know there is an INIT code that can be entered that will nuke everything.. A little help if possible would be grand!
Great video! It was very useful to me. I still have one problem that I cannot solve. On factory settings, the option to print multiple/post receipts is disabled. How do I enable it? I sometimes would like the option to have two copies of the same receipt. I tried: PGM 03 - 0622 - 40000 already, but I still cannot print an extra receipt. What am I overlooking?
I still have one problem thet i cannot solve. On factory settings , the option to print multiple/ UNIT PRICE is disabled. How do i enable it? Thanks in advance!
Good day to you ! I'm trying to use my Casio se-c450 exactly payment methods so when i'm trying to configure the Credit Card they told me that i have a button for that but i haven't found it could you please tell me how could i do it ?
Hi, what you need to do to configure a payment method is to: Turn the key to PGM, arrow to the bottom of the page to System Settings, type in 4 then press subtotal (should display P04), type in 4 then press the button on the keyboard you wish to allocate the Credit Card function to, then press subtotal. You can then name the key but typing 2 then subtotal, press the button you just allocated, change the text to what you would like displayed, press Ca/Amt Tend, then press subtotal. Turn the key back to the REG position and do a test sale. This should work!
If it’s already set the easiest way is to go to settings, tax and set the rate to 0 If you are setting up for the first time, simply don’t do the Australia Tax setup. You can also set tax on each item or department to none.
Hi Kelly, You just put a name again the Department or PLU and leave it at a zero price. When using the key you enter a price (do not use decimal point) then press the Department or PLU on the keyboard. If you have any troubles just us know.
after entering 1622, just type in 0 then Ca/Amt Tend. This will clear the setting. If you want to disable the grand total from printing, you use code 1177 then press ca/amt tend.
The font size is fixed. You can print the text in double height but this is only for the items so the receipt header is still the same size. If you want to print the text bold, then just press the button with dbl in its front face which will increase the text for receipt header large but remember this will act as 2 characters and not 1.
@@cashregistersau Great video! It was very useful to me. I still have one problem thet i cannot solve. On factory settings , the option to print multiple/ UNIT PRICE is disabled. How do i enable it? Thanks in advance!
If you are located in Australia, you can go to www.cashregisterwarehouse.com.au but it outside of Australia, please contact your local Casio cash register dealer.
What seems to be the issue with programming? We have may people using this guide for setting up their systems without an issue. Feel free to contact us directly on the website in the video details if you would like any further assistance. We do have alternate step by step guide. It also depends on how your cash register is setup (if not new) as they can be setup as either departments or PLU's so it may be something in relation to that as this is a straight out of the box setup.
![[#SHORTS CLIP] ครูอึ้ง กรรมการอึ้ง ฮ่าๆ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/qeBTuMJs4t0/mqdefault.jpg)
![หมานแต่ผัวเขา - แสตมป์ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/m0g1TSBJPgo/mqdefault.jpg)
Thank you for this very simple Tutorial:)!
than you thank you,,, this is a simple tutorial,and I finally got it, I patted myself on the back . Thank you again.
The printer sounds neat.
If you do not require the Grand Total to print:
1. Turn key to PGM
2. Arrow down to system settings and press CA/Amt Tend
3. Type 3 then Subtotal
4. Type 1622 then Subtotal
5. Type 1177 then Ca/Amt Tend
6. Press subtotal to finish
Turn the key to X or Z and Press Ca/Amt tend to test.
This should work.
Great video! It was very useful to me. I still have one problem thet i cannot solve. On factory settings , the option to print multiple/ UNIT PRICE is disabled. How do i enable it?
Thanks in advance!
I know this is a long shot, I've searched high and low trying to work out the INIT code for the 3500. I'm trying to get it back to a factory state. Left the batterys out for 24 hours with no power connected and it still retains the data / Dept / clerk information.
Resetting by Journal feed + PGM with no luck, same with Feed + PGM with no luck. I know there is an INIT code that can be entered that will nuke everything.. A little help if possible would be grand!
I am your 102 subscriber
Hi, is it possible to use this machine without using the programmed departments?
Thanks
en donde consigues la caja registradora
How di I change he journal tape, instructions, please.
Great video! It was very useful to me. I still have one problem that I cannot solve. On factory settings, the option to print multiple/post receipts is disabled. How do I enable it? I sometimes would like the option to have two copies of the same receipt.
I tried: PGM 03 - 0622 - 40000 already, but I still cannot print an extra receipt.
What am I overlooking?
I still have one problem thet i cannot solve. On factory settings , the option to print multiple/ UNIT PRICE is disabled. How do i enable it?
Thanks in advance!
Hello sir
How can I turn off the refunding function?
Good day to you !
I'm trying to use my Casio se-c450 exactly payment methods so when i'm trying to configure the Credit Card they told me that i have a button for that but i haven't found it
could you please tell me how could i do it ?
Hi, what you need to do to configure a payment method is to: Turn the key to PGM, arrow to the bottom of the page to System Settings, type in 4 then press subtotal (should display P04), type in 4 then press the button on the keyboard you wish to allocate the Credit Card function to, then press subtotal. You can then name the key but typing 2 then subtotal, press the button you just allocated, change the text to what you would like displayed, press Ca/Amt Tend, then press subtotal. Turn the key back to the REG position and do a test sale. This should work!
hi how do you clear grand total.
thanks,
How do you cancel the Australian GST on a Casio SE-3500?
If it’s already set the easiest way is to go to settings, tax and set the rate to 0
If you are setting up for the first time, simply don’t do the Australia Tax setup.
You can also set tax on each item or department to none.
Do you have to have a store to buy this or can you buy it for home use
You can purchase this item directly from our website if located in Australia. www.cashregisterwarehouse.com.au
Hi, I would like to know how I can remove the decimals
system settings, press 3 and then SUBTOTAL, press 2000000000 and then CA after that press SUBTOTAL
Bonjour,
i have some problems when i setup my casio se-c450 with my SD CARD , Can u help me please ?
What are the problems you are facing? Please send us an email and we can try to assist
i have en ERROR E18 when i install this casio ? can u assist me ? i add u in skype saif.labiadh
Hi how to open the cash register without sales
You press No Sale (NS) when in Reg mode to open the cash drawer without making a sale.
how to program the currency key and rate?
???
how do i have a button with no amount on a misc button
Hi Kelly, You just put a name again the Department or PLU and leave it at a zero price. When using the key you enter a price (do not use decimal point) then press the Department or PLU on the keyboard. If you have any troubles just us know.
Do you know how to disable codes after programming it?
+Daniel Bio
Which codes do you wish to disable exactly?
i entered '16-22' then '1111' then i realized my decimal place went back so from 1.2 to .12, i want to deactivate it
after entering 1622, just type in 0 then Ca/Amt Tend. This will clear the setting. If you want to disable the grand total from printing, you use code 1177 then press ca/amt tend.
+cashregistersau it still not working, you know if it is possible to reboot the whole thing to factory settings
+Daniel Bio I have a Casio se s400 if that helps
How do I make receipt size bigger..please help
The font size is fixed. You can print the text in double height but this is only for the items so the receipt header is still the same size.
If you want to print the text bold, then just press the button with dbl in its front face which will increase the text for receipt header large but remember this will act as 2 characters and not 1.
@@cashregistersau Great video! It was very useful to me. I still have one problem thet i cannot solve. On factory settings , the option to print multiple/ UNIT PRICE is disabled. How do i enable it?
Thanks in advance!
Where do you findet ??????????????????
Sorry, I don't understand the question? What are you looking for?
Kamila Silvestry where should I go to get one cash register pls tell me
If you are located in Australia, you can go to www.cashregisterwarehouse.com.au but it outside of Australia, please contact your local Casio cash register dealer.
時歌吃歌唱出來回家中午早點
四歌歌唱出來回家中午時期坐上午茶包
四歌歌唱出來回家中午飯吃素
蹴
素歌歌唱出來回家中午休時間長老師吃冰
四吃歌歌唱出來回家中午休息一下車
四歌
四跳歌歌唱歌
泡麵蹴歌歌唱出來回家中午
如果
蹴歌歌唱出來回家族長老師生數十吃完
四吃歌台
時歌歌唱出來回家中學長老師水中華民國坐
What a nightmare programming system. Totally non-intuitive.
What seems to be the issue with programming? We have may people using this guide for setting up their systems without an issue. Feel free to contact us directly on the website in the video details if you would like any further assistance. We do have alternate step by step guide. It also depends on how your cash register is setup (if not new) as they can be setup as either departments or PLU's so it may be something in relation to that as this is a straight out of the box setup.