@@WooleySwampAdventures hello. Like your videos and I’m intrigued by the general xp on portals. I have a non xp g4 on portals and love it but going to be switching to an xp. Would you mind giving me some info, the specs on yours which portals. Ground clearance width and wheel offset and any other mods you had to do? Etc. thank you in advance.
The machine is actually Jason Lord's, He'll be doing a build series on it on his channel, Rzr's Edge in Motion. I'll ask him to chirp in here though and answer some build questions. Jeff
@@bobveach6240 Hi, I did SuperATV portals, 4" with 30% reduction. The wheels are 6/1 offset, because it's already about 75" wide. Also went with 15" wheels so there would be plenty of room around the calipers. Ground clearance is set at 20" at the usual spots. Factory is 13.5" + 4" portals + 2 1/2" for tires = 20". It will need forward offset arms, it does rub just a bit in the fenders, but not bad at all. Super is supposed to have those out *maybe* in Sept. It's very stable at this height and width, I don't believe the center of gravity changed much at all... it might have even lowered it just a bit. I did Kryptonite tie rods, one of the few out there with automotive style rod ends... I hate heim joints. They don't list them specifically for the GXP, but one of the other model RZR's are a direct match, I think it was the RZR XP Turbo. If you're into crawling, definitely go with a Duraclutch, otherwise just bolt things on as you wish.
Great trail riding video. Good to see Rzr's edge team riding with you.
Jeff is actually part of the RE fam now too 😊 Has been for a couple of years now
I wanna see a build video on that general!
It's my buddy Jason's. you can check it out on his channel, Rzr's Edge in Motion.
What tires are you running on your machine?
My Blue Rzr XP1000 has 32x10-15 Dirt Commanders, My Black HLRzr has 33x10-15 XTR370's, Jason's G4XP on Portals has 35x10-15 K9 Stickies
@@WooleySwampAdventures hello. Like your videos and I’m intrigued by the general xp on portals. I have a non xp g4 on portals and love it but going to be switching to an xp. Would you mind giving me some info, the specs on yours which portals. Ground clearance width and wheel offset and any other mods you had to do? Etc. thank you in advance.
The machine is actually Jason Lord's, He'll be doing a build series on it on his channel, Rzr's Edge in Motion. I'll ask him to chirp in here though and answer some build questions. Jeff
@@bobveach6240 Hi, I did SuperATV portals, 4" with 30% reduction. The wheels are 6/1 offset, because it's already about 75" wide. Also went with 15" wheels so there would be plenty of room around the calipers. Ground clearance is set at 20" at the usual spots. Factory is 13.5" + 4" portals + 2 1/2" for tires = 20". It will need forward offset arms, it does rub just a bit in the fenders, but not bad at all. Super is supposed to have those out *maybe* in Sept. It's very stable at this height and width, I don't believe the center of gravity changed much at all... it might have even lowered it just a bit. I did Kryptonite tie rods, one of the few out there with automotive style rod ends... I hate heim joints. They don't list them specifically for the GXP, but one of the other model RZR's are a direct match, I think it was the RZR XP Turbo. If you're into crawling, definitely go with a Duraclutch, otherwise just bolt things on as you wish.