Bruder Tractor RC conversion pt3 : steering & electronics
ฝัง
- เผยแพร่เมื่อ 2 ก.ย. 2018
- Final part of 3 videos showing how to convert the Bruder John Deere 5115M tractor to radio control using hobby grade components. I tried to keep the tractor as original looking as possible and use readily available inexpensive parts in the build.
Parts used for the build :
Bruder John Deere 5115M Tractor part number 09814 (with trailer 09816) www.brudertoys.com/en/usa/rang...
Tamiya gearbox (from tracked vehicle) www.amazon.co.uk/Tamiya-70108...
Hobbyking 15178B servo hobbyking.com/en_us/hobbyking...
10 A ESC like this www.banggood.com/10A-ESC-Brus...
The (now discontinued Orange GR300 receiver I used (can be found on ebay second hand) - shown here for dimensions hobbyking.com/en_us/orangerx-... I’m sure that other radio systems could be used if the receiver small enough
The video series :
Part 1 • Bruder Tractor RC conv...
Part 2 • Bruder Tractor RC conv...
Part 3 • Bruder Tractor RC conv...
Please 'like' if you found the video useful or interesting and subscribe if you haven't done already as I plan to do a few more different Bruder RC conversions. Please feel free to post links here to your own Bruder conversions. - ยานยนต์และพาหนะ
Outstanding group of videos. You definitely have motivated me on building another Bruder model. Thank you!
many thanks! These are great fun to do & quite addictive! 😀👍
RC Modders I couldn’t agree with you more my friend.
Another informative video. I use velcro quite often now to fix the rx and ESC in place....just another alternative to tie-raps
Thank you! That is also a good way to do this - especially if you want to be able to remove it easily. 😀👍
Nice work.👍👍👍
Many thanks 🙏🏻
Beautiful!
Thank you! 😀👍
nice build..
Thank you. This was surprisingly satisfying to do. There are plenty of little challenges, but nothing that can't be overcome with bit of thought. It actually goes very well - for what it is - and given that it cost £25 including the green tipper trailer, I don't think you can really too go far wrong. I might try one of the 6v motors to see what difference it makes.
very cool again bud I recently purchased a ertl 1/16 dicast farm tractor for a conversion..I do wish bruder came with rubber tires.. Thats one and only set back but there is a world of tires out there also just got to do some thinking to make it work like you said.. 8-)
With a bit of lead in the tyres it goes a lot better. The limited space was the real challenge with this one.
You are amazing!
Thank you. This little tractor is still going strong! 😀👍
Wow, do you live near airport or race track?? More great ideas. Thank you for sharing
Thank you! Actually the railway line goes behind the end of our garden. In the later mods I’ve been doing them in the house and inside the shed - where there is less noise 🙂👍
Excellent thank you so much
You are very welcome 🙏🏻
Great videos! What motor would you recommend for one of these? Do you have a link at all please? Thanks !
Thank you. I think that I used the gearbox motor from the Tamiya tracked vehicle set. Standard tamiya motor worked best - but just limit the ESC to about 60% travel as the motor is low voltage (v.cheap to replace tho) here is a uk amazon affiliate link: amzn.to/2V7BD3Y 😀👍
@@RCModders Thank you :-)
Can you show how your usual method of attaching the wheels to the models? Thanks
More recently I have moved to designing 3D printed hub adaptors and motors with built in gearboxes - the tractor was one of my earliest attempts to convert Bruder toys to RC. Still, this one runs very well. 😀👍
I am going to convert the Bruder fastrac. Just need to figure out how to make a scale mower to fit it and I will have fun cutting the grass.
That is a good model to convert. I did one with 4 wheel steering and 4 wheel drive - with a mix to allow different steering options (front / back / all / crab) using a Flysky GT5 transmitter. 😀👍
@@RCModders I will have a look into doing that, I am going to look to see where I can get that transmitter at a good price as the extra channels would help (I have seen some rigs that have servos on the front and rear to lift up the 3 point hitches) so the more channels the better. I have been messing around with my mn99s for now as delivery for stuff is a bit bad (my mn99s took 3 months to arrive)
hi i need advice i want to build the same tractor but i can't find one part and that OrangeRx GR300 DSM2 Compatible 3Ch 2.4Ghz Ground Receiver could you send me a link where I could order the part? Thank you very much
I think that receiver might be obsolete now. Any small 3 channel receiver - with matching transmitter- should be ok.
Hallo Freund, kann ein beliebiger 12V Gleichstrommotor an 7.2V angeschlossen werden? Grüße
Translation "Hello friend, can any 12V DC motor be connected to 7.2V? greetings". Greetings to you also. I think yes it can - although the motor will be a little slower and less powerful below its rated voltage. 😀👍
@@RCModders Vielen Dank für die Antwort. Ich nahm an, was ich nicht verstehe, ist, weil Leute 12V-Motoren verwenden, wenn es 6V gibt. Würden Sie mir sagen, dass normalerweise rpm verwendet wird? Ich bin neu und mir fehlt etwas. Grüße
where did you get those "pliers"?
Search 'z bender' and you will find them in plenty of places. I use them in just about every Bruder conversion.😀👍
How it turn left right without diffrencial gear ????
This model is probably better with a fixed rear axle - for traction on mud etc.
What is the name of your metal bender tool? Where did you get that? Well done on your mods Sir!
Thank you. These are my ones - Irvine - they have a little pointy bit which when inserted into a servo control horn hole gives you a perfect length every time: www.rcworld.co.uk/acatalog/Irvine-Super-Z-Bend-Plier-with-Nav-Pin-T_ZB01.html?gclid=EAIaIQobChMIrZjmi4Lt3wIV4ZXtCh2wmgy5EAQYASABEgImifD_BwE 😀👍
what the battery voltage
7.4v 😀👍
Debería haber en Cali este tractor de juguete
Hi maybe I google translate doesn't quite understand your question. Do I'm not quite sure how to answer this. Maybe someone who understands Spanish could help me here?
@@RCModders He said something like "I wish we had this toy tractor in Cali (Colombia)". Cheers, Mr. RC!
👌👌👍👍🚜🚜
Thank you 🙏🏻
I've got a few of those ESC's, 10 and 20A versions. tiny and fit almost everywhere. this is the one we have to convert: uk.tomy.com/products/britains-big-farm-massey-ferguson-6613-tractor
Good luck with the conversion. I've not done any metal ones, I've got loads of Bruder's waiting for conversion. 🙂👍
En todas las ciudades de Colombia tienen que vender este tractor de juguete de bruder
Translation : "
In all the cities of Colombia they have to sell this toy tractor of bruder"
En todas las ciudades de Colombia tienen que vender juguetes bruder y hablé con angel moreno que quiere vender juguetes bruder en. Buenaventura y Cali,Medellín,pereira y manizales
Translation : "
In all the cities of Colombia they have to sell bruder toys and I talked to a dark angel who wants to sell bruder toys in. Buenaventura and Cali, Medellín, pereira and manizales" 😀👍