Air rotary. I used to drill water wells, with that method. But also used CABLE TOOL rigs. Here in the Canterbury plains, with gravel/ sands, we have to use a casing ALL the way. Some wells 150 - 200 mts deep. Than screen dropped in, and casing jacked back to expose the screen allows the water in. Will add, cable tool also used for TEST DRILLING bridge piles and under buildings, to see what piles are needed. Welded casing, so each weld had to be done properly. 3 runs on each. Root run, bottom run, 3rd run to finish. Cheers to all.
For digging water wells, both air rotary drilling and mud can be used! Great people in the drilling industry! If the solution I am talking about can help you, that is my original intention of making this video. I have also compiled a complete pdf document of the solution. You can get it for free by clicking on the link below the video. I also hope you can subscribe. My channel!
I believed I saw this water drilling operations a few years ago while driving along I-10 to Los Angeles. I'm impressed as well how the crew work as if they knew every steps of the drilling process. Thank you for uploading, very informative!
Every drilling project is exciting! If you are also interested, you might as well click on the link below the video to automatically obtain a copy of the product information!
In Ireland there are many drilled wells we have one too . Made in the same way . But we have a special insert on the bottom bit of the sleeve to make a water proof connection in to the rock. Because in Ireland a lot off what I call dirty ground water could leak in the well and can contaminate your well .
Good job. Pretty much the same process is used to drill 20000 foot wells and deeper. Different equipment, fluids, pumps, etc. But the basic process is the same. They were using an “Air Hammer”, with compressed air, some water, an a commercial soap to make the foam. You did a great job explaining for the novice. 😊
Thank you for your affirmation and support! If the plan I am talking about can help you recover your losses, this is also my original intention of making this video. I have also compiled a complete plan pdf document. You can get it for free by clicking the link below the video. I also hope you can subscribe to my channel. !
I'm in the mountains and we have good water. The drillers hit water at about 80 feet but it's just surface water. The wells can be deep or shallow. My first well was at 240 feet. I had it re-drilled and they went close to 500 feet. My neighbor just drilled his well, 500 feet for 100 gallons a minute. I have watched them drill a few wells, not exciting but it is something to see.
My father and the neighbor bought a well rig and drill pump and the three of us drilled our well set the casing and blew it clean 24” X 300’ we drilled five wells for four properties in the San Joaquin Valley.
Yes, sir! If you are interested in our products, you can click on the link below the video to obtain a detailed product information and the latest quotation form for free. We will contact you as soon as possible. Thank you for your support and trust. We hope we can have the opportunity to cooperate together!
I think the DTH Hammer is the best drilling equipment! I regularly import these equipment from China, the quality is great and it doesn't break the bank! Do you have a factory? I want to see your product information!
With the progress of the times and the new iteration of drilling equipment! DTH Hammer is indeed a good choice! Our factory comes from China! We have a factory area of more than 3,000 square meters. We support on-site factory inspections. We have fourteen years of drilling tool production experience. You can click on the link below the video to obtain a product information document. We will contact you as soon as possible and we look forward to cooperating with you!
Air rotary.
I used to drill water wells, with that method.
But also used CABLE TOOL rigs.
Here in the Canterbury plains, with gravel/ sands, we have to use a casing ALL the way.
Some wells 150 - 200 mts deep.
Than screen dropped in, and casing jacked back to expose the screen allows the water in.
Will add, cable tool also used for TEST DRILLING bridge piles and under buildings, to see what piles are needed.
Welded casing, so each weld had to be done properly. 3 runs on each.
Root run, bottom run, 3rd run to finish.
Cheers to all.
For digging water wells, both air rotary drilling and mud can be used! Great people in the drilling industry! If the solution I am talking about can help you, that is my original intention of making this video. I have also compiled a complete pdf document of the solution. You can get it for free by clicking on the link below the video. I also hope you can subscribe. My channel!
I believed I saw this water drilling operations a few years ago while driving along I-10 to Los Angeles. I'm impressed as well how the crew work as if they knew every steps of the drilling process. Thank you for uploading, very informative!
Every drilling project is exciting! If you are also interested, you might as well click on the link below the video to automatically obtain a copy of the product information!
In Ireland there are many drilled wells we have one too . Made in the same way .
But we have a special insert on the bottom bit of the sleeve to make a water proof connection in to the rock. Because in Ireland a lot off what I call dirty ground water could leak in the well and can contaminate your well .
Good job. Pretty much the same process is used to drill 20000 foot wells and deeper. Different equipment, fluids, pumps, etc. But the basic process is the same. They were using an “Air Hammer”, with compressed air, some water, an a commercial soap to make the foam. You did a great job explaining for the novice. 😊
Thank you for your affirmation and support! If the plan I am talking about can help you recover your losses, this is also my original intention of making this video. I have also compiled a complete plan pdf document. You can get it for free by clicking the link below the video. I also hope you can subscribe to my channel. !
I'm in the mountains and we have good water. The drillers hit water at about 80 feet but it's just surface water. The wells can be deep or shallow. My first well was at 240 feet. I had it re-drilled and they went close to 500 feet. My neighbor just drilled his well, 500 feet for 100 gallons a minute. I have watched them drill a few wells, not exciting but it is something to see.
Drilling projects are never boring and are always exciting!
How exciting is this deep drilling technology!
Drilling projects are never boring! He always gets me excited!
My father and the neighbor bought a well rig and drill pump and the three of us drilled our well set the casing and blew it clean 24” X 300’ we drilled five wells for four properties in the San Joaquin Valley.
Wow! Great thing! What drilling equipment do you regularly use?
Cool video. Curious, do these drill bits rely on air compressors to apply pressure for drilling? How to buy Air Hammer?
Yes, sir! If you are interested in our products, you can click on the link below the video to obtain a detailed product information and the latest quotation form for free. We will contact you as soon as possible. Thank you for your support and trust. We hope we can have the opportunity to cooperate together!
😮
I think the DTH Hammer is the best drilling equipment! I regularly import these equipment from China, the quality is great and it doesn't break the bank! Do you have a factory? I want to see your product information!
With the progress of the times and the new iteration of drilling equipment! DTH Hammer is indeed a good choice! Our factory comes from China! We have a factory area of more than 3,000 square meters. We support on-site factory inspections. We have fourteen years of drilling tool production experience. You can click on the link below the video to obtain a product information document. We will contact you as soon as possible and we look forward to cooperating with you!