DJI Phantom 3 Gimbal Motor Overload camera fix
ฝัง
- เผยแพร่เมื่อ 7 พ.ค. 2017
- Please consider contributing to support Team Louish: buymeacoffee.com/teamlouish
We use Amazon Affiliate links where possible.
My screwdriver kit: amzn.to/2vOznoM
If your camera starts up crooked or not level, here is how to fix it.
Please consider contributing to support Team Louish: buymeacoffee.com/teamlouish
I didn`t know what to do, every time I start the drone I had to calibrate the Gimbal, this was the solution, thanks a lot
You are a lifesaver! After an hour of searching, I found your video which explained the same problem I had (from a small drone crash) and you solved the problem I had. Thank you for saving me from the repair costs ;)
Awesome. After hours of searching, you seem to be the only one I could find with a solution. Thank you.
Thank you. It worked perfectly and was easy. I bought my Phantom 3 cheap because of the camera missalignment. Neither seller or I knew that it was so easy to fix.
I can only tell you, Great! ... I thought about it, but I did not dare until I saw your video ... I bought a secondhand advance and after calibrating the gimbal when I went to restart the drone it fell back down. I had to do it again and again, I was about to unbind the engine (but I did not dare) until you showed what to do ... thank you and new subscriber ... greetings from the VI region of O'Higgins, Chile
Dude this helped me fix a broken drone I was trying to salvage. Kudos.
Thank you so much. I use mine with my business and thought I was going to have to buy a new gimble . This fixed it perfectly!!
Great find and excellent fix, thanks for your time.
Thanks man!! You saved our lifes!!
I had the same problem. Thanks for the walkthrough!
Thanks for your help on this
Camera is now working great
Thx a Lot! Worked perfect! 10 Minutes of Work!
Another fixed Phantom here. Thank you!
Thanks for showing us that because my was doing the same but it’s back to its self now 👍🏻
You saved me a lot of money, thank you very mutch for your help
This really helped me out. Appreciate you making this video. Saved me from just buying a new drone hahaha
Gracias Amigo, estoy en el medio del campo y en mi primer vuelo choque. Era impracticable mandar a reparar el desperfecto. Eternamente agradecido desde Córdoba, Argentina. Thanks a lot!
great vid, this is the 3rd time I use this video to fix it
Amazing tip! Reattached my camera on my P3S with a new ribbon but the gimbal was going haywire. This solved it and now it levels just right.
Glad you got it working again.
you probably dont care at all but does anybody know of a trick to log back into an Instagram account??
I stupidly forgot my login password. I would love any tricks you can give me!
@Kylan Conrad Instablaster ;)
@Lawson Conner Thanks so much for your reply. I got to the site thru google and im trying it out now.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
Thank you very much. It fixes my Problem!
Thank you so much! It fixed it for me.
Thank you man... Salvou demaisss
Great! Fixed my problem in 3 minutes!
Thank you! another drone repaired!
Thanks so much. Fixed my drone!
I had to try this several times before it eliminated the crazy dance. Alignment is very sensitive and must be perfect. even a 1/16" off wont work. Works now!!!
You are a savior 🙏
Thanks bro god bless you 🙏🏾🙏🏾🙏🏾
DUDE......you are sooooooo Appreciated, thank you. In the last year I've spent a minimum of $2100 due to a lack of knowledge......My repair man is DONE(HISTORY)....Lol.
Glad I could help!
thanks man it saved me
Muito obrigado amigo
I'm having this issue but I noticed gnat flat part on the shaft is only out of line the slightest amount. Would that still be the issue? I didn't crash mine it just popped up this morning. Thank you.
Thanks a lot it works!👌👍
Thanks bro ! Its working !
me hiciste el dia! muchas gracias por el aporte
suscrito!
great video!!
So what happens if all the axles are aligned and screws tightened? Fun part is that my problems started after a nasty crash but it's all aligned anyway. I didn't have to correct a thing. It still starts tilted and keeps rolling to the right.
Thanks bro fixed one of my problems!
P
P
P
That is a perfect example of what I need to do with my drone I am experienced same problem with my drone but this fixes it
It won’t let me move my gimbal up and down from my controller. Do you have a fix?
This is awesome!!!
Thanks Richard!
Parabéns pelo vídeo: Peço ajuda, meu drone é Phantom 3 SE , gimbal parou de se mexer, não faz mais movimento. Tentei mudar cabo friense mesmo assim fico na mesma. Peço ajuda
saved mine thanks!
thank you sir i have fixed my drone problem
No grub screw to tighten somewhere? To avoid the problem reappearing again ?
Mine hasn't reappeared again... unless I crash :)
Is it the same with the phantom 4?
Mine broke as well like yours did where u showed it at the end of the video "7:38" , how did u get it to lock on good to where it wont just fall off
saved my live!!!
O meu gimbal do p3 Advanced tem hora que desarma e deita para o lado e volta ao normar, oque pode ser?
is this method can fix also the unbalanced horizon in the video? , everytime i make yaw the horizon level is suddenly not levelled.. can this adjustment help or fix the issue?
Me sirvio Grcias
Muito obrigado amigo, resolveu meu problema!
Que chave vc usou?
Nice, thx
Thank
" so you take needle nose pliers.... where the fuck did they go? " that cracked me up. thanks for the help and a laugh good stuff :)
Thanks bro👍🏼
Curts Review glad I could help
Trank you you help me again
thanks
I have an issue after an accident the Flexible Gimbal Flat Ribbon Flex Cable broke and I ordered a new one and installed it once I install it camera because craze as it in your Video . I tried to do as you did no luck same issue I ordered a new Gimbal Roll Arm & Motor . I installed them but same issue camera is very crazy please let me know if you can help
Wish I could like this video more then once
Trevor Kollis you can just like some of my other videos too :)
Hola necesito ayuda ... Le cambie el flex a mi dji 3 prof. Pero me dice no imagen o q es debil ... Con el flex nuevo ... Cambie y compre otro y me dice lo mismo. Saque el brazo con camara y flex de otro dji 3 y anda perfecto. Puede ser q 2 flex este fallados? La placa de la camara la saque y la probe parte y anda
top! cumpleanos!
Obrigado amigo. Resolveu o meu problema
Seja bem-vindo
Qual chave usa?
TNK
Clint, in the last few seconds you talk about "when I took this off and stuck it back on"... In a frantic mess after mine dropped I popped mine back on trying to help. Since then I was unable to "stick it back on". What am I missing? How do you pry your pieces apart even after that little screw is removed? Any help is appreciated. Thanks.
Mine just kinda snapped on, kinda magnetic I think. It was so long ago, I can't fully remember, but on mine didn't even close all the way perfectly shut when it "snapped it back on". You can see the little gap. I'm not sure how that piece is supposed to stay on there. It just kinda snapped back into place.
Awesome, video, thanks man, however, after I did the rotation adjustment, now it won't even try to calibrate, it will just sit there until eventually the overload message come back,and the right hand side gimbal motor is super fry and egg on it kinda hot. Any suggestions? Thanks.
Mine did same. After adjusting the gimble 180 degrees and then back 90 degrees it worked.
thx thx
I have a profesional and tried the same procedure, seems different inside with no mark. No luck! Please help if anyone know the way to do it for the Professional 4K gimbal
If you've figured out a solution to your drone problem, please post a reply here letting us know how you fix it.
Hi, just curious, obviously you are turning the shaft but do you happen to know if the shaft is turning inside some sort of clamp or if the shaft is turning something else inside, at a guess, the gimbal arm?
Not sure. If you find out, please post your findings.
Hi, if I get a scrapper or have an accident with mine I will let you know
@@Team.Louish It seems there might be a "magnetic sensor ring" on the shaft, it interacts with a sensor on the board. The ring might be glued to the shaft, twisting this ring wrt the shaft changes the 'rest' position of the shaft and therefore the gimbal wrt the board. Acetone might be a solvent for the glue. The ring is apparently very fragile so needs to be handled with GREAT care. As it is magnetic I am not sure whether it is a good idea to use steel etc. tools to move the sensor ring. There are a number of threads about this sensor ring on the phantompilots forum e.g. phantompilots.com/threads/p3p-camera-off-center.118727/
Did this error stop the motors from spinning up also?
3D Print not for me. I forget the errors on the screen cause it was so long ago, but no, I could still fly it.
It’s been over a year now, and I came back to this video. After I align that thing and turn my drone on, it starts up perfectly fine. But after I turn it off and on again every time it gets worse and worse and I keep having to realign it. You have any solutions?
Wish I knew how, I don't use the drone anymore. Hopefully someone else will see your question and respond!
Thanks you save me 40 dollars
Could anybody Help me
I crashed the Drone agains a Wall the camera shaked and shaked and i turned IT off
I took IT Home and turned IT on its not moving, but it was before
It smelled a little Like yk When metal Burns, i saw 1 kabel is a little bit cuted.
Could IT be That problem the wire?
I cant rotate it too hard to rotate😓😓😓
i did it it sux anyway, always came back with same problem till i put some super bonder glue on it all. now it sends this overload message but still flyes and record. think its kinda solved but gimbal is not moving anymore due to the glue dji made a shitty fragile gimbal
I fixed then auto calibrated. But my phone still warning " Gimbal Motor Overload ". I don't know how to erase it
👍👍👍👍👍👍👍👍
Hi there, I have the same problem with my phantom 3 standard, however, the level sign of my drone is totally aligned with the horizontal plane. What else the problem could be? Best regards.
Sorry, I'm not sure. But if you figure it out, please post your solution here so others can learn how to fix other issues.
Sir why is my phantom 3 camera geting hot after flyt ?
You might have two pins on the ribbon touching. Check the ribbon cable going to your camera and make sure its seated perfect and not damaged.
My camera don’t show anything on my phone any advice??
check the cables
My mark is level still sideways. Any ideas?
Mark Tomaszewsky there is another pin you can adjust just like this one under the larger panel at the top.
My gimbal says the overload and twitches constantly
Muito bom esse vídeo do Fhanthom sempre aprendendo.escrevi no seu canal escreve-se no meu
Obrigado!
Legend, shop wanted to replace gimbal
Mine went weird when the box fell over in a car ride
Unfortunately that did not solve my problem, does anybody else knows another way to do it?
Doesn’t turn at all... please help
After repair, the roll is still not level. (The flat part of the spindle IS parallel with the camera.) All help appreciated. The problem is shown on the video: th-cam.com/video/a-gwEEiYvxU/w-d-xo.html
daajjj 6
To anyone here..is it possible to put a GoPro gimbal on a phantom 3 standard to replace the original gimbal?
It would easily support the weight. I don't see why you couldn't.mount something like a gopro session gimbal on there, but I don't know how you would control where its pointing. Here is one you'd be able to figure out a way to mount: www.banggood.com/Tarot-TL3T02-T-3D-IV-3-Axis-Brushless-Gimbal-for-Gopro-Hero-4-SESSION-Camera-p-1090577.html
There might even be a gimbal made specifically for the phantom 3 standard, but if not, there are a lot of gimbals out there that hold sessions or heros that are meant for drones. If you absolutely needed the ability to control the gimbal, you'd probably have to install a separate radio transmitter just for the new gimbal. But if you just wanted the camera facing forward and down slightly, you could position the camera before flight and then not need to control it at all.
Clint Decker - Thanks for that.. greatly appreciated..
The GoPro gimbal I had actually ordered has a remote for positioning side/side, up/down and even an app which I haven't received to explore yet..
I also have an existing hero 5 stationed under the back of battery of my phantom for continuous video instead of continuously positioning the quadcopter which is perfect...I had actually lost the camera only on my phantom, the gimbal and arm itself is perfectly fine..so now I'm thinking on putting my hero 3 with this new one because the video is way sharper than the original camera.
Thank you kindly for answering my question and especially for your knowledge..happy new years and have a great day.
Keep in mind with your gimbal remote that you have, chances are that is a very short range remote. If you're flying anywhere far, you won't be able to use your included gimbal remote.
Clint Decker - That's what I was thinking and actually wondering myself and no mention of it that I've found..
Considering I'm mainly using this phantom 3 for filming boating and quad'n trips, hopefully it'll do the trick with the new one... it'll be interesting to see it's limits of distance before no signal that's for sure..I might have to get a buddy to modify it.
Still haven't arrived yet..but thanks for that.
Mines won't spin!! Help!!!
I tried it also and it didn't spin either. Did you buy a replacement motor?
I just send it back to Amazon and got another one.
The moral of the story is don't crash your quad.....Yes, I know, I have done a few times myself, sucks!!!!....Great vid! TY SIR!
Best video. Watch the language though
CRAP !! i found this Video too late.. i already sent my gimbal to DJI repair center 🤦♂️🤷🏻♂️
Is yours under warranty. Let us know how much they charged to fix this.
@@Team.Louish $82 dollar. parts are cheap but labor is $60 per hour. but it return like new. they even polished the lense
@@mateoalzate1738 did it take 82$ for everything?
@@ivanrudnitskiy8774 yes my friend
@@mateoalzate1738 thank you, didn’t expect you to respond 😂
Parabéns pelo vídeo: Peço ajuda, meu drone é Phantom 3 SE , gimbal parou de se mexer, não faz mais movimento. Tentei mudar cabo friense mesmo assim fico na mesma. Peço ajuda
Conseguiu resolver