Torsional Shearing Stress - GEAR RATIOS in 3 Minutes!

Gear Torque Ratio, Gear Radii Ratio, Torsional Shearing Stress in Shafts
Polar Second Moment of Area, J
Internal Torques
Example 1: • Torsional Shearing Str...
Example 2: • Hollow vs. Solid Rod -...
Example 3: • Torsional Shearing Str...
Main Lecture Video Link:
Shearing Stresses, TORSION in 11 Minutes!
• Shearing Stresses, TOR...
______________________________________________________________
Other Mechanics of Materials Lectures:
Watch the entire course in less than 4 HOURS!!
01 Axial Loading Normal Stress: • EVERYTHING on Axial Lo... ​
02 Shearing Strain and Stress Components: • SHEAR STRAIN and Stres... ​
03 Axial Deformation, Temperature Changes, and Poisson’s Ratio: • Axial Deformation, The... ​
04 Statically Indeterminate: • STATICALLY INDETERMINA... ​
05 Stress Concentrations and Factor of Safety: • Stress CONCENTRATION F... ​
06 Shearing Stress, Torsion: • Shearing Stresses, TOR...
07 Angle of Twist, Statically Indeterminate: • Torsion, Angle of Twis...
08 Bending Stress, Second Moment of Area, and Parallel Axis Theorem: • PURE BENDING and Paral...
09 Stress Concentration Factors for Torsion and Bending: • Stress CONCENTRATIONS ...
10 Beam Deflections & Singularity Functions : • Bending and BEAM DEFLE...
11 Transformed Sections for Bending (Composites): • Bending and BEAM DEFLE...
12 Transverse Shear: • Everything About TRANS...
13 Shear Flow: • Thin-Walled Members an...
14 Mohr’s Circle and Principal Stresses: • Principal Stresses and...
15 Pressure Vessels: • Thin-Walled PRESSURE V...
16 Ductile Failure Criteria (Yield): • Yield (DUCTILE) FAILUR...
17 Brittle Failure Criteria (Fracture): • Fracture (BRITTLE) FAI...
18 Combined Loading: • Everything About COMBI...
19 Column Buckling: • BUCKLING - Column Stab...
20 Elastoplastic Beams and Residual Stresses (torsion too): coming soon

[@abdulsaboor9816]

thanks a lot, sir.

[@nicholasofthetube4557]

Some notes, when calculating dcd, he forgot to write pi on the equation, but he used it to calculate 43.9 mm. Also, on the final formula of dab, he wrote 0.04/0.1 but it should be inverted, 0.1/0.04

[@mayurdahiwale5907]

Actually he has his separate notes which are correct, only for making the video he writes it again while recording, then he gives the voiceover in reference to his main notes. So this sometimes puts error, which is still fine

[@nicholasofthetube4557]

@@mayurdahiwale5907 yeah, that's why I also said that he used the missing parts to calculate the final result

[@riiru33]

thanks sir

[@sabarafiei9334]

thanks a lot🤩

[@ettsoc9018]

thx sir

[@marisakirisame659]

marisa