.. I used the green-white paperclip after looking everywhere for the hole except where it was. I haven't reset or booted it for possibly 5 solid years. Flawless, set and forgot. This is the required reset I need in there. Don't even think it booted since the few times during setup. It was in the last place I looked, the hole. Like duhhh. If you show the defaults that I now require you'll earn a fan.... I realize, suddenly, that I'm going to have to break out my 'teen years' vinyl and make certain that you get all of Rocka Rolla and Sad Wings of Destiny that you clearly require. And be sure to refresh Hell Bent For Leather! LOL Rocka Rolla is in vinyl picture record in a clear vinyl sleeve . I always felt as if something was missing when everything went digital.
Yep, looking very nice but honestly I muted it. Redo it with old Priest or at least real Iron Maiden. A promise might have to be a promise... I might even break down and subscribe. Fortunately for you I somehow had my official "Critic" channel banned some time ago... I might have to duplicate this vid with good metal and see how many customers you loose... what?!? outtta bidness?!? Again?!! jj tnx ttul8r
...and the video, reluctantly because the DOS action was so perfect and I needed the defaults. (I usu don't do my ref on you this media site) and here comes another self liked comment, I could start a land slide.
I'm thinking of unsub'ng since you didn't provide the default login info. admin just wouldn't work until I actually looked it up. of course, the defaults....
First of all, you don't have to hold the reset button in for a full minute. With the unit powered on, hold in the reset button with a paperclip or wire. You'll notice the power light go out and come back on. That "should" be good enough, but I did hold it in for another 10 seconds (for good measure). Another thing thing that's misleading about the video is the username and password. When you telnet into the box. The username and password are both "admin". Also, I never had to even telnet into my switch. Once I had reset it, I plugged a laptop into it with a static IP address of 10.90.90.123 and was able to access (and log into) the web interface with the password of "admin". Hope this helps.
hi i try to do same steps for D-link web smart switch 1228p . but it could not log in to switch. when I try to login through the browser, after entering the password its not working properly, the screen showing some HTML. so is there any way to login
I have done this reset tutorial on a D-LINK DGS-3100-24 and works perfectly, thank you for sharing this video.
the most bad ass factory reset in history
Uhhhh... I came here for a factory reset procedure and Dream Theatre??? My guy just won all the points.
..
I used the green-white paperclip after looking everywhere for the hole except where it was. I haven't reset or booted it for possibly 5 solid years. Flawless, set and forgot. This is the required reset I need in there. Don't even think it booted since the few times during setup. It was in the last place I looked, the hole. Like duhhh. If you show the defaults that I now require you'll earn a fan....
I realize, suddenly, that I'm going to have to break out my 'teen years' vinyl and make certain that you get all of Rocka Rolla and Sad Wings of Destiny that you clearly require. And be sure to refresh Hell Bent For Leather! LOL Rocka Rolla is in vinyl picture record in a clear vinyl sleeve . I always felt as if something was missing when everything went digital.
Yep, looking very nice but honestly I muted it. Redo it with old Priest or at least real Iron Maiden. A promise might have to be a promise... I might even break down and subscribe. Fortunately for you I somehow had my official "Critic" channel banned some time ago... I might have to duplicate this vid with good metal and see how many customers you loose... what?!? outtta bidness?!? Again?!!
jj tnx ttul8r
I liked my own comment!
...and the video, reluctantly because the DOS action was so perfect and I needed the defaults. (I usu don't do my ref on you this media site) and here comes another self liked comment, I could start a land slide.
...and next time get the camera closer! (respect your elders)...
I'm thinking of unsub'ng since you didn't provide the default login info. admin just wouldn't work until I actually looked it up. of course, the defaults....
First of all, you don't have to hold the reset button in for a full minute. With the unit powered on, hold in the reset button with a paperclip or wire. You'll notice the power light go out and come back on. That "should" be good enough, but I did hold it in for another 10 seconds (for good measure). Another thing thing that's misleading about the video is the username and password. When you telnet into the box. The username and password are both "admin". Also, I never had to even telnet into my switch. Once I had reset it, I plugged a laptop into it with a static IP address of 10.90.90.123 and was able to access (and log into) the web interface with the password of "admin". Hope this helps.
thank you for the password!
Sir which is access port please
спасибо, смог восстановить забытый пароль, в telnet не обязательно заходить после сброса. модель DGS-1210-26
Hi. How reset device, if i can't find reset button? 1210-28/ME
I am having some trouble with the Sytac reset password step, I see you typed in admin as the user, what exactly did you enter in the password field?
what should i type in the password field?
What we should type
Sir which is access port please help me
What password I must type in telnet?
Wow! Dream Theater
hi i try to do same steps for D-link web smart switch 1228p . but it could not log in to switch. when I try to login through the browser, after entering the password its not working properly, the screen showing some HTML. so is there any way to login
Valeu
Alguém sabe como dar reset no DES 3010g Obrigado.