Thank you all for the encouraging words and taking the time to watch this video, you have all helped my channel grow and I appreciate you all more than you know😀 Please consider subscribing and becoming a member so we can keep achieving success😎😎😎Lots of good stuff coming soon, next couple of months it’s been a long year, Thank you again my friends love you all
So thankful for this video! Single mom here, in nursing school with a tight budget. My dryer quit working and I thought I was going to have to replace it. Thankfully I found your video and it made it so much easier (and cheaper lol)!! Appreciate you taking time to teach others!
Thank you thank you, i just finished 30 mins ago fixing my dryer with your step by step instructions, great job with the video content, thanks once again. It's working again, i saved money 💰. I feel like a technician now 😂. Thank you.
Awesome video, really helped me save a lot of time. There was a small tab on the 2 wire connector. It was on the front plate side, just pull the tab up lightly and pull the connector apart. Thanks again.
This video was a life saver!!! Was able to repair my dryer today after realizing that the drum stop moving. Very simple but yet effective video! Thank you 🙏🏾
This was very helpful. Thanks for posting! The guy at the hardware store who told me I wouldn't get my dryer belt fixed in the same day definitely didn't see your video.
Thank you so much for this!! Stressed me out when my dryer went out. Came across your body then boom…found about $3 in change and got my dryer back working!!’
You’re amazing! I finally decided I would try to DIY it and your video was so easy and well explained. Followed you step by step real easily. I probably had it all done in 20-30 minutes. 🙏🏻
Thanks for sharing the installation process of the replacement belt. Much easier than I thought, and way cheaper than having a repair person coming out and charging too much!
Great video !! I couldn't figure out how the belt went over the tensioner pulley but was able to see it through your video . Thanks for saving my day 😊
I have exactly model. Was trying to go thru back panel til I saw your video. As for the upper plug you couldn't disconnect, mine had a tab and came apart in seconds. Now to search for my belt. Using number on belt. Thanks buddy.
Thank you for the helpful video. I was hesitant at first but after not finding a repair person in my small town I looked this up and was amazed at how easy it was to swap out the belt. My dryer was making a screeching noise. Turned out the belt was good but lint build up was causing it to screech. I went ahead and replaced the belt since it only cost $8 on amazon, cleaned it out and used compressed air to dust out all the electronics in the back. It is worth noting that it is a good idea to keep an eye on the front clips that hold the screw in place.. I almost lost one. I also found it is easier to put the front panel together if you mark the clip on base and hole on front panel with a sharpie (i did not have any help and took me a couple of tries aligning clips) Thanks again... Have a great day!
Great video.Thanks. Additionally, I used a bungee cord to hold in the drum place while I worked. Also, my electrician connection was a Quick-Connect. Surprised what an easy fix this was. Thank you for the guidance.
Thank you. You made it easy to do. Like I noticed in other comments, the tensioner required I look at your vid again and now the dryer works better than it has for years. The old belt was really shredded.
Thank you! We, like a lot of people, are struggling right now and this video saved us from having to replace the dryer or call someone. Hubby and I did it together and nobody cried or cussed!😊
Thanks! The instructions worked fine with the exception that I had to use pliers to bend the drum facing tab on the idler pulley just a small amount to get it to catch.
Let me tell you my dryer wasn't working for 3 days. I didn't even know how to fix it. I didn't want to call anybody. I was going to buy a whole new one. Then my husband saw your video. I went to Lowe's and I bought a belt. I took it apart as you showed me and I put it together. He helped me put on the door. I am so grateful for you. Thank you from this mom of five...What else can you teach me? ❤❤❤❤🎉
Your video was very helpful! I just wanted to say the "quick" release wire attached to the door panel can be released by pushing in that little tab with a pointy thing like a screw driver while gently pulling the two halves apart.
Bought mine from best buy in 2017. It just snapped today. So, here i am, looking for education. Thank u for taking the time to show me/us. A huge help to me to make this a very affordable diy project.
As a wife of a truck driver that is gone most of the time. I thank you so much for doing this video. I was able to fix our dryer myself and not have to buy a new one. I found $5.07 in my dryer.
Good Video.. I am an Electronic Tech, Retired but never fixed a dryer before, I know it is super simple" BUT " I just didn't know how to replace the belt. Now I know. Thank's to you. You have a New Sub. THank you for your help.
I followed your video on my Amana dryer I put painters tape on the belt to keep from tweeting over until it was installed I also took my channel lock pliers to unclip the black electric wire clip on the right side took the front panel and moved it to the side
Dude... Not only was I successful in repairing our dryer today, but I also found 3 gold rings. Two of them have precious stones and have been missing more than a decade. There was a bunch of change also.
Thank you soooo much!!!! Your video was super easy to understand and I was able to follow you instructions exactly!!!! Not all hero’s wear capes!!!!!!! ❤
Brother....iam a concrete guy..and my clothes destroys dryer and I was about to go buy a new one and your vodeo helped me fix myself ❤❤❤❤ your awesome possum.
I love you. Like dude, i was struggling like "where is this belt supposed to go". Didn't know i had to feed it under the wheel thingy. Thank you. Keep doing what you're doing brother
Thanks, Chaotic Lizzards et al. The tutorial, along with the comments to disconnect the power source clip and the bungee cord to hold the drum, made all the difference in the world 🌎! Can't wait for another belt to break! (Well, maybe that's getting a lil' too carried away...)
Great way to start my New Year's January 1st 2023 belt broke just got the belt today and installed it with the help of this video I wish nothing but good things to you much love
Great video. Very helpful, I had to change heating element in this exact dryer and leaf blower the lint out from the back. Ended up getting lint wrapped around drive shaft for motor and wouldn’t rotate drum. Reaching in through hole in back I thought I could just pull the belt off and the tensioner stay there. Alas, it did not….. so glad to have found your video now I know why I couldn’t figure out where it was supposed to go!
The wiring comes apart, you need a small flat screwdriver to pry away from the locking ramps(clip mechanism) it is tricky so I understand the caution to just leave it alone and carefully slide the front panel out of the way so you have enough room to work
Thank you, I ended up taking out the drum just to check all the wheels and vacuum out all that lint. Going to home Depot to get the belt today. Wish me luck!
Literally worked exactly how you showed, was having problems with that connector like you said and followed everything you said to a T, works perfectly now.
Thanks Plain Money, hey to Plain and everyone else who enjoyed this video, consider becoming a member to help my channel grow😃A lot of good stuff coming out in the next couple of months 😎
Very nice, don't know how I missed that. But it is very important, and some people just don't have what it takes to do the right thing first. Common sense. So glad you did include it in your video. Nice job I am sure it is helpful to them who need it. well done. And Mahalo for responding and showing me what I missed. Keep up the great job.
Hey, thank you for the encouraging words, I appreciate that! I should have put that part in the beginning of the video, because you are exactly right, the first thing you should do is unplug it👍 oh well, live & learn, getting better every video! Thank you for watching!!
Cool video a question do I need a new timer because I put on any number to make a lot of noise and I don't put start button yet the noise sounds like crackling
thanks for the video, That Annoying Clip for the wire, put your finger nail in or a falt head and pry it off for the Electric, I had to result to putting a ratchet strap on the bottom of mine LOL
Thank you all for the encouraging words and taking the time to watch this video, you have all helped my channel grow and I appreciate you all more than you know😀
Please consider subscribing and becoming a member so we can keep achieving success😎😎😎Lots of good stuff coming soon, next couple of months it’s been a long year,
Thank you again my friends love you all
1d0122-ad.myshopify.com/
So thankful for this video! Single mom here, in nursing school with a tight budget. My dryer quit working and I thought I was going to have to replace it. Thankfully I found your video and it made it so much easier (and cheaper lol)!! Appreciate you taking time to teach others!
What can i do if my screws on the lint trap are stripped
try pliers, they also sell kits for backing out stripped screw
@@Timkrutzmusic.
Thank you thank you, i just finished 30 mins ago fixing my dryer with your step by step instructions, great job with the video content, thanks once again. It's working again, i saved money 💰. I feel like a technician now 😂. Thank you.
Awesome video, really helped me save a lot of time. There was a small tab on the 2 wire connector. It was on the front plate side, just pull the tab up lightly and pull the connector apart. Thanks again.
This video was a life saver!!! Was able to repair my dryer today after realizing that the drum stop moving.
Very simple but yet effective video!
Thank you 🙏🏾
For real, the way you explained all of that made it so much more simple than All of the other videos I watched so far
Thank you for this SETP by STEP video. Clear and to the point! Big help!!!
You’re welcome👍 thank you for watching
This was very helpful. Thanks for posting! The guy at the hardware store who told me I wouldn't get my dryer belt fixed in the same day definitely didn't see your video.
Worked exactly like the video said it would. I even fixed it myself while my husband was at work!!😮
Thank you so much for this!! Stressed me out when my dryer went out. Came across your body then boom…found about $3 in change and got my dryer back working!!’
Great video, I have the exact same dryer and just couldn’t figure out the belt routing around the tensioner. Makes sense now! Thank you!
You’re amazing! I finally decided I would try to DIY it and your video was so easy and well explained. Followed you step by step real easily. I probably had it all done in 20-30 minutes. 🙏🏻
Thanks for sharing the installation process of the replacement belt. Much easier than I thought, and way cheaper than having a repair person coming out and charging too much!
I would have struggled trying to get the front off without your video. Thank you.
I’m a TH-camr myself lol. So I want to show love to your page since you helped me.
Great video !! I couldn't figure out how the belt went over the tensioner pulley but was able to see it through your video . Thanks for saving my day 😊
Thank you for watching 😃😃
thank you so much for the simple but detailed viseo.. i have the same
unit and theres only 1 belt left at our lowes😂 big help!
Glad it helped
I have exactly model. Was trying to go thru back panel til I saw your video. As for the upper plug you couldn't disconnect, mine had a tab and came apart in seconds. Now to search for my belt. Using number on belt. Thanks buddy.
Thank you for the helpful video. I was hesitant at first but after not finding a repair person in my small town I looked this up and was amazed at how easy it was to swap out the belt. My dryer was making a screeching noise. Turned out the belt was good but lint build up was causing it to screech. I went ahead and replaced the belt since it only cost $8 on amazon, cleaned it out and used compressed air to dust out all the electronics in the back. It is worth noting that it is a good idea to keep an eye on the front clips that hold the screw in place.. I almost lost one. I also found it is easier to put the front panel together if you mark the clip on base and hole on front panel with a sharpie (i did not have any help and took me a couple of tries aligning clips) Thanks again... Have a great day!
Great video.Thanks. Additionally, I used a bungee cord to hold in the drum place while I worked. Also, my electrician connection was a Quick-Connect. Surprised what an easy fix this was. Thank you for the guidance.
Thanks, perfect how to video, i wish other repair video makers would watch yours first to see how to do it.
Hahaha
Thank you. You made it easy to do. Like I noticed in other comments, the tensioner required I look at your vid again and now the dryer works better than it has for years. The old belt was really shredded.
I had an idea on how to do this job but the video is even better thanks again
Thank you, your was more easy and understanding. I found 5 dollar worth change in my dryer
Excellent directions! You saved me a lot of money really appreciate it.
Appreciate the video, it made replacing my belt much easier.
Great to hear!
Excellent, straightforward instructions! Thank you so much for this!
Thank you! We, like a lot of people, are struggling right now and this video saved us from having to replace the dryer or call someone. Hubby and I did it together and nobody cried or cussed!😊
Thanks! The instructions worked fine with the exception that I had to use pliers to bend the drum facing tab on the idler pulley just a small amount to get it to catch.
I like the part about removing the lint filter. Easiest part to do.
Why can't all instructional videos be this good?
THANK YOU!! This was a PERFECT instructional video!
Great video! My Amana dryer wont spin as of today. Thanks for the help.
Let me tell you my dryer wasn't working for 3 days. I didn't even know how to fix it. I didn't want to call anybody. I was going to buy a whole new one. Then my husband saw your video. I went to Lowe's and I bought a belt. I took it apart as you showed me and I put it together. He helped me put on the door. I am so grateful for you. Thank you from this mom of five...What else can you teach me? ❤❤❤❤🎉
Yhanks alot buddy my first time replacing a belt
Just needed to know where the pulley went. Thank you good sir.
Thank you for this! Just tore mine apart and it wasn't as hard as I thought it was going to be!!!!!
Your video was very helpful! I just wanted to say the "quick" release wire attached to the door panel can be released by pushing in that little tab with a pointy thing like a screw driver while gently pulling the two halves apart.
Thank you for your help !! You made it very easy to understand. And yes I unplugged before I started working on it. 😂😂
Bought mine from best buy in 2017. It just snapped today. So, here i am, looking for education. Thank u for taking the time to show me/us. A huge help to me to make this a very affordable diy project.
Thanks for this!!! Saved me A BUNCH of time.
As a wife of a truck driver that is gone most of the time. I thank you so much for doing this video. I was able to fix our dryer myself and not have to buy a new one. I found $5.07 in my dryer.
Thank you for making this easy! First time I try something like this and you made it easy to do it with your straight forward instructions
Watched your video and totally fixed my dryer! Thanks!
Good Video.. I am an Electronic Tech, Retired but never fixed a dryer before, I know it is super simple" BUT " I just didn't know how to replace the belt. Now I know. Thank's to you. You have a New Sub. THank you for your help.
Wow. This is step by step excellent. THANK YOU!
I followed your video on my Amana dryer I put painters tape on the belt to keep from tweeting over until it was installed I also took my channel lock pliers to unclip the black electric wire clip on the right side took the front panel and moved it to the side
thanks so much.. this video made it very easy .. would have had to hire someone thanks again
Thank u. I just fixed mine for heating problems next is this!
Thank you so much for the informative video👍 You Sir. Are a Godsend. Just fixed my dryer problem thanks to you. Have a blessed day my friend.
Thank you kind sir. You are a legend. God sent. Worked like a charm.
Dude...
Not only was I successful in repairing our dryer today, but I also found 3 gold rings. Two of them have precious stones and have been missing more than a decade. There was a bunch of change also.
Bro this was the exact video with the exact dryer I needed . THANKS. My Friday just got way better
Great video, saved me a lot of money either paying someone to fix it or buying a new dryer all together.
Thanks for watching
Appreciate it man. Had a belt break a couple of days ago, this video helped a lot in fixing it myself.
Thank you so much for this video. I had no idea what I was doing 😓
Thank you soooo much!!!! Your video was super easy to understand and I was able to follow you instructions exactly!!!! Not all hero’s wear capes!!!!!!! ❤
Brother....iam a concrete guy..and my clothes destroys dryer and I was about to go buy a new one and your vodeo helped me fix myself ❤❤❤❤ your awesome possum.
fixed my dryer thanks to your video 🙌
I love you. Like dude, i was struggling like "where is this belt supposed to go". Didn't know i had to feed it under the wheel thingy. Thank you. Keep doing what you're doing brother
The wire harness comes off. If you flip it over(in your video) there’s a quick connect clip. Just slightly raise the clip up and pull apart
Thank you so much. I couldn't have done it without this video♡♡♡
Thanks, Chaotic Lizzards et al. The tutorial, along with the comments to disconnect the power source clip and the bungee cord to hold the drum, made all the difference in the world 🌎! Can't wait for another belt to break! (Well, maybe that's getting a lil' too carried away...)
Thanks man! Very detailed and patient!
Legend Brother I stg thank you so much straightforward tutorial and answered all the questions I needed.
thank you for watching my friend
Yo man fkn thank you yo only video that gave me a clear view too pull the belt thru the tension i was dumbfounded forever
Because of your video, we got this done. Very much appreciate the detail on the belt tensioner 👍
You saved me some money thanks for the clear and fast instructions
Great way to start my New Year's January 1st 2023 belt broke just got the belt today and installed it with the help of this video I wish nothing but good things to you much love
Great vid! I replaced mine, same model, and with all the change I found, the belt was free!
Thanks for show us how to put the front panel back on
Great video. Very helpful, I had to change heating element in this exact dryer and leaf blower the lint out from the back. Ended up getting lint wrapped around drive shaft for motor and wouldn’t rotate drum. Reaching in through hole in back I thought I could just pull the belt off and the tensioner stay there. Alas, it did not….. so glad to have found your video now I know why I couldn’t figure out where it was supposed to go!
The wiring comes apart, you need a small flat screwdriver to pry away from the locking ramps(clip mechanism) it is tricky so I understand the caution to just leave it alone and carefully slide the front panel out of the way so you have enough room to work
Thank you, I ended up taking out the drum just to check all the wheels and vacuum out all that lint. Going to home Depot to get the belt today. Wish me luck!
Just the video I needed.I even found some snack change for the work vending machine.Thanks!
Literally worked exactly how you showed, was having problems with that connector like you said and followed everything you said to a T, works perfectly now.
It sounds super easy. Wish me luck when I do this in a few minutes. 😅
Just helped me fix my issue! Thank you very much :)
Bless you, you’re the man!
Thanks Plain Money, hey to Plain and everyone else who enjoyed this video, consider becoming a member to help my channel grow😃A lot of good stuff coming out in the next couple of months 😎
Thanks for sharing i have the same problem and i found change too
Thank you for a very detailed and straight to the point video
Very nice, don't know how I missed that. But it is very important, and some people just don't have what it takes to do the right thing first. Common sense. So glad you did include it in your video. Nice job I am sure it is helpful to them who need it. well done. And Mahalo for responding and showing me what I missed. Keep up the great job.
Hey, thank you for the encouraging words, I appreciate that! I should have put that part in the beginning of the video, because you are exactly right, the first thing you should do is unplug it👍 oh well, live & learn, getting better every video! Thank you for watching!!
Thanks for the simple hands on explanation… here goes.. well, something 😂🤷♀️🤦♀️ Fingers crossed…
Thank you! Fixed and saved a hundo $$
Thanks man.Awesome video. 💪🏾💪🏾
Thank you brother fixed mine under 5 minutes 👍
Thanks for watching!
Cool video a question do I need a new timer because I put on any number to make a lot of noise and I don't put start button yet the noise sounds like crackling
This worked exactly as in the video!!! Thank you thank you thank you!! Saved me major money
the clutchest. much love
Nice video, very helpful.
Gracias mi Amigo!! It was way better your way!!
Good video. I’m gonna have to replace my belt soon wasn’t sure how
Thank you so much!
Good looks kehd. Love learning from a fellow hockey playin masshole
This just saved me $500
Thanks for this I now feel so accomplished when my bf comes home he will be surprised he will probably even assume a man came in and helped me 😅😅😅
Hahahah I hope I didn’t get you in trouble🤣 Thanks for checking out my channel!!
Great Job
There’s a little plastic latch connecting the wires, I pryed each side with a flathead and I was able to pull them apart
GREAT CLEAR VIDEO THX A MILLION IN ADVANCE
molex connections are held by a clip in most cases or just friction. mine was a clip i had to lift to pull it apart
thanks for the video, That Annoying Clip for the wire, put your finger nail in or a falt head and pry it off for the Electric, I had to result to putting a ratchet strap on the bottom of mine LOL