Did exactly as explained and saved a lot of money(which I would need for others priorities too) my boiler is on pay as you go meter and this video saved my life!!! thank you very much for this video...
Thank you very much indeed! You saved us a lot of hustle, I am a mum of two and this happened to my boiler at around midnight and we would have not had hot water till tomorrow night so God bless you for this detailed video xxx
Just want to say thank you for this video it worked straight away. Came home to my chappy smart meter thing dead as always unless it plugged in 24/7 it dies but was showing the gas simble saying gas supply disconnected. Boiler error code 133. Followed your instructions and its fired right up when running hot tap and holding reset for 2 seconds just before it turn the screen off. Thank you very much again 😊
Hi I'm trying to find a video for a Baxi Megaflo System 15 HE , it's also displaying the error 133 and I've done the checks as per your digital display however as mine isn't digital I was wanting to check it's the same fault .
@Coral-Mai Gifford yes I found the fix myself , the water pressure was down to low to allow the boiler to fire up as a safety mechanism , so whilst boilers have different ways of putting water into them, mine have a valve and gauge underneath , so I turned the valve and watched the pressure go back up out of the red into the green area , then the boiler was back to normal for heating and water , hope that helps.
Tutorial helps me. At first didnt work. Then i give a go for the second time. Run the water first then reset. Let the water run until the hot aater sign comes up
Dear sir, i own a baxi duo tec compact and my question is: how can i rise the hot water pressure that comes from the boiler to the flat? Thank you in advanced Takis
The instructions to reset are fine but what do you do when the error keeps coming back every few days? Your suggestions are pretty poor, yes obviously you need to make sure the gas is switched on. Done that, now what?!
What a piece of crap unit. Hereon west coast never heard of Baxi duo sys. So cant find reliable service people. Code 133 has at least 1/2 doz repair options some o f which are apain to check out and don't make sense. Baxi take back your Italian pos. And stick to making cars and fast women.
Actually a dangerous suggestion to turn the gas back on if turned off. If you re establish the gas after being turned off a gas Safe engineer should carry out mandatory checks
I thought I’d just post how our E133 code Baxi was repaired. It turned out to be the regulator by the gas meter, a plumber checked it and it was 10bar when it should be around 22 bar. We called cadent and they replaced the whole meter including the regulator.
If radiator simbol is flashing it means that there is heating demand. If the burner starts and works very short period of time, that could mean closed taps (radiators for example) or filters may be full of dirty. Also check a pump. Otherwise error shoud be displayed
I cannot be more disappointed by this brand, a new Baxi boiler shows either E128 or E133 and after 6 visits from the technicians, nobody has a clue as why this is happening. This seems a very common issue and people have been chasing up a solution for a long time. I am renting at the moment, but I will never buy a Baxi boiler.
We have the 133 error every other day. Baxi cannot find the fault, have been trying to explain it with anything irrelevant from neighbours oven to sunspots. Although the customer service is good our next boiler wont be Baxi.
Did exactly as explained and saved a lot of money(which I would need for others priorities too) my boiler is on pay as you go meter and this video saved my life!!! thank you very much for this video...
Maded for idiots... did you check your gas card? Lol😊
Thank you very much indeed! You saved us a lot of hustle, I am a mum of two and this happened to my boiler at around midnight and we would have not had hot water till tomorrow night so God bless you for this detailed video xxx
Just want to say thank you for this video it worked straight away. Came home to my chappy smart meter thing dead as always unless it plugged in 24/7 it dies but was showing the gas simble saying gas supply disconnected. Boiler error code 133. Followed your instructions and its fired right up when running hot tap and holding reset for 2 seconds just before it turn the screen off. Thank you very much again 😊
Thanks for the help other videos never explained to turn the tap on while trying to reset just saved me calling my landlord thanks a mil
Someone turned off my gas supply? Your video helped thanks
Thank you so much. I had this problem on Boxing Day and this video fixed my problem. I now have hot water and heating back on.
The boiler won't display the flashing tap symbol as all it does is dispaly the flashing e133 code
What does ok13 mean on the boiler code? Mines on but not heating up. It was working fine a few hours ago
I'm getting the same issue except I have no hot water running and it's not resetting 😢is there anything else I can do before I call someone?
Hi I'm trying to find a video for a Baxi Megaflo System 15 HE , it's also displaying the error 133 and I've done the checks as per your digital display however as mine isn't digital I was wanting to check it's the same fault .
Doesn’t work, Error Code E133 stays on even when running the water, nothing firing up I’m afraid
Same here, did you find a fix
@Coral-Mai Gifford yes I found the fix myself , the water pressure was down to low to allow the boiler to fire up as a safety mechanism , so whilst boilers have different ways of putting water into them, mine have a valve and gauge underneath , so I turned the valve and watched the pressure go back up out of the red into the green area , then the boiler was back to normal for heating and water , hope that helps.
Thank you, it’s working again.👏👏
Doesn’t work, e133 changed to e168 & alternate, breaks every year & no pressure either so can’t use the tap & trigger it either!
Thank you!💪🏼
Thanks so much!! All up and running great again 😍
Tutorial helps me. At first didnt work. Then i give a go for the second time. Run the water first then reset. Let the water run until the hot aater sign comes up
Dear sir,
i own a baxi duo tec compact and my question is: how can i rise the hot water pressure that comes from the boiler to the flat?
Thank you in advanced
Takis
you cant
Get some decent taps with tge inserts relevant to the help you need pressure wise or contsct your water supplier about pressure issues
Erm, like thank you so much 😮
Great advice Thanks
Did the reset and let the water running, but instead of the water tap flashing, it was the heating that was flashing
Thank you! 👍
The instructions to reset are fine but what do you do when the error keeps coming back every few days? Your suggestions are pretty poor, yes obviously you need to make sure the gas is switched on. Done that, now what?!
Thanks 🙏🏻
It’s not worked for me 😭
Gracias
Baxi has to be one of the worst boilers I have ever used.
instablaster.
What a piece of crap unit. Hereon west coast never heard of Baxi duo sys. So cant find reliable service people. Code 133 has at least 1/2 doz repair options some o f which are apain to check out and don't make sense. Baxi take back your Italian pos. And stick to making cars and fast women.
Agree they’re terrible.
I agree ❤
Actually a dangerous suggestion to turn the gas back on if turned off. If you re establish the gas after being turned off a gas Safe engineer should carry out mandatory checks
I thought I’d just post how our E133 code Baxi was repaired. It turned out to be the regulator by the gas meter, a plumber checked it and it was 10bar when it should be around 22 bar. We called cadent and they replaced the whole meter including the regulator.
10bar!! I do hope you mean mbar
radiator symbol is flashing on my boiler but I have no heating can you help
Did you get your boiler working? Mine is doing exactly the same and have no idea how to get it working.
If radiator simbol is flashing it means that there is heating demand. If the burner starts and works very short period of time, that could mean closed taps (radiators for example) or filters may be full of dirty. Also check a pump. Otherwise error shoud be displayed
I cannot be more disappointed by this brand, a new Baxi boiler shows either E128 or E133 and after 6 visits from the technicians, nobody has a clue as why this is happening. This seems a very common issue and people have been chasing up a solution for a long time. I am renting at the moment, but I will never buy a Baxi boiler.
In my case was the stick inside the boiler.
@@trueno87 same here
@@trueno87 what do you mean stick? I'm getting desperate here, so if you can let me know that would be most helpful
@@stesnjak what do you mean stick? I'm getting desperate here, so if you can let me know that would be most helpful
@@DrPepper22222 its the “lighter” it maked a flame and ignites the gas.
Magyarul
We have the 133 error every other day. Baxi cannot find the fault, have been trying to explain it with anything irrelevant from neighbours oven to sunspots.
Although the customer service is good our next boiler wont be Baxi.