Wow! What a great video from start to finish. I don't know if you've noticed it or not, but your editing skills have constantly improved over the years. It's one thing that you're a magician on building things, but you're also great at putting videos together. So happy for you and getting to see you put the "Dream Boat" together. Thanks for taking us along on the journey.
Even from the beginning of this video to the end the change is pretty drastic I noticed. Just in the video quality to loosing the logo in the corner I was shocked myself just watching it. Thank you for the kind words I can't wait for the dream jet to finally start.
Surely when you run up the sand it will fill the impeller intake and housing? It will be like grinding paste next time you start it? Not that I know much about those modes of propulsion?
Probably could have sold the donor hull until you cut it up and then dropped it from the forks of a skid steer. Plenty of folks need good fiberglass for their wave runners.
Comes in super handy. 62" and actually found it off of you tube. Come to find out it was a local guy who was also in to boats and jets built it and when he was done, listed it on fb for sale. Couldn't say no. I watched your build series on the jet bow fishing boat. What pump setup did you run? I can't for the life of me remember its been a couple years
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
![[ ออกกอง ] วัยหนุ่ม 2544 โลกหลังลูกกรง..ทัวร์กองถ่ายหนังใน "คุกของจริง" | JUSTดูIT.](http://i.ytimg.com/vi/vB--aOkZCpw/mqdefault.jpg)
Quite possibly the coolest boat EVER! Glad we met while you were in Dayton TN. Looking forward to your next build, and good luck in Florida!
Wow! What a great video from start to finish. I don't know if you've noticed it or not, but your editing skills have constantly improved over the years. It's one thing that you're a magician on building things, but you're also great at putting videos together. So happy for you and getting to see you put the "Dream Boat" together. Thanks for taking us along on the journey.
Even from the beginning of this video to the end the change is pretty drastic I noticed. Just in the video quality to loosing the logo in the corner I was shocked myself just watching it.
Thank you for the kind words I can't wait for the dream jet to finally start.
@@JDSOutdoors pl. P
InstaBlaster...
Nice beach landing to finish an awesome build video. This is the best one I've seen on the subject so far.. .. keep up the good work
Bad ass little boat. Hell yea. Great build. Take care and stay safe
Excellent job you have much to be proud of!
So rad!! I've been wanting to build something like this for a long time now!
Do it. If you have access to the tools its really not to bad to do. Heck of a lot of fun as well.
Like the nose longer than others I’ve seen. And boat deeper. COOL.
Nice build.. But gotta say.. I didn't see any cleaning of aluminum before you welded..
Curious if you turned on the GPS to see how fast she tops out at? Great job.
I got 50mph a few times. Most of the time 48mph was the fastest
@@JDSOutdoors Thats pretty good.
Nice!
Youre printing hella hard through like half of this.
Lmfao i love it.
From the outline id say you have a g19 or 43
Surely when you run up the sand it will fill the impeller intake and housing? It will be like grinding paste next time you start it? Not that I know much about those modes of propulsion?
I would rinse it out but yes pumping sand eats wear rings. They are only 40 bucks and you can't put a price on a smile.
Probably could have sold the donor hull until you cut it up and then dropped it from the forks of a skid steer. Plenty of folks need good fiberglass for their wave runners.
Tried to sell it for 2 months. Even tried to give it for free. Nobody wanted it so I saved myself some time and cut it up
@@JDSOutdoors man that's a shame, I would've grabbed that baby in a heartbeat
Did you buy the plans to cut it on you plasma table or is this your own design?
I bought plans and modified them to what I wanted
Nice build! How thick is your material and how deep did you cut to make the bends in the bottom?
So awesome. Excellent craftsmanship. What kind of welder is that?
That is a millermatic 255
@@JDSOutdoors what u prefer mig or tig to welder this boat?do u think a great job can be executed with both?🙏great job
@@annadasilva7332 I prefer mig. But tig is nice for those seen welds that need to be really pretty. To tig a whole boat will take 10x longer than mig
Awesome!!
What was the cost
Awesome simply awesome 👏
ooooooohhh that press brake!
Comes in super handy. 62" and actually found it off of you tube. Come to find out it was a local guy who was also in to boats and jets built it and when he was done, listed it on fb for sale. Couldn't say no.
I watched your build series on the jet bow fishing boat. What pump setup did you run? I can't for the life of me remember its been a couple years
Huh, what kind welder is that?
Millermatic 255
love it!
Wicked boat build n vid ...did u use plans or your design?
I used emperor racing plans for a base and I added my own touches to it. The current new build series is 100% my design
@@JDSOutdoors please is this plan available to the public for download?
Beutifull job 🎆👍🚤
what kind of welding machine and plasma to cut it did you recomend thank's🏄♂️🌠
I love my millermatic 255 and my hypertherm xp45
Man i want one so damn bad
They are fun
@@JDSOutdoors where can i buy one do you know
@@grasser82 you can find em online.
Duct tape, handymans secret weapon
Do you sell this laser cut plan?
I dont but they do sell them online
Plans please
Look up mini wee plans online they sell em. Gotta sign that you won't share them though without punishment
Awesome job. Would you sell plans. I want to make one one smaller and out of ply wood
Pretty cool!!! How long you figure it took? Would you build another to sell?
Yea I'd build another one took a few weeks
Price?
@@lukecullett9044 with the cost of materials today it be between 35 and 40
Olá. Blza. Você vende o projeto
Em. CAD
Jesus. You laser cut that yourself!?
I sure did