Nice video. Can you tell me how do you get that background color? Is the setting from Acad (Options/Display/Colors/3D/Uniform background) ? Or is it a Advance Steel setting? Thank you.
How can I set a layer in the advance steel dwg template that when the GA or assembly drawing dwg is created this same layer can be set turned off or frozen and not printed in the GA and Assembly dwg? It is that some times I need to use helping beams and those should not be in the drawing and I want to set them on a layer in the model dwg that when they are being turned in to the GA or assembly dwg they do not show up there as they would be on the layer that is set frozen and not printed. An other example is with guard rail posts on corners where two guardrails meet and one post needs to be set on this layer and of course un check everything in the behavior tab.
Dear Structural BIM, Could you please help me. I have a connection which one I beam and one I column. Need to draw a cap on top of the column and extend to beam. This cap shall be fasten to beam by bolts. I try to use knee connection to draw a cap and extend to beam. But I don't know how to add bolts. Thank you very much!
Hello guys, does anyone know how to setup advance steel so it puts created drawings(say GA, camera drawings, parts and assembly drawings) into the model space and not in pare/layout?
@@bim-things but the real issue is that i have one camera drawing and i made couple of cuts and view details on it, but the details can't fit in the same paper/layout so i want to have them in a different paper/layout. How can i do that? Please help cause i'm new in AS.
who else agrees that advance steel is bullshit? tekla is way much better. Usually when it comes to structure modelling I recommend using Paint and for structural analysis I overstate the beam's dimensions so I'm pretty sure the structure is enough stiff to resist superimposed buckling and wearability deflection bending flexural stress.
Hello Tutor. Thanks for the tutorial, but I regret to say it didn't help me because the type of base I was getting from the connection vault was different from yours. Also, I couldn't locate the apex haunch. I am also using Advanced steel 2019. I wish you could first give a getting started tutorial. Otherwise, I wasn't helped.
This is not a beginners tutorial. this video is designed to show the speed to detailing in Advance Steel. For basic tutorials, see my Getting Started playlist - th-cam.com/video/MpoA7VhiOxQ/w-d-xo.html
Thank you so much. Please when do we use Revit steel and When do we need to use Advance steel?
Hi. Thanks for the great tutorials. When using these macros, can one split the rafter for a splice joint if the member becomes too long?
EXCELENTE me sirvió de mucho
My question is what are the differences between revit structure and advanced steel? If I use revit 2020, what does AS provide extra? Do i need both?
Advance Steel automates the fabrication drawings, use Revit for design intent, Advance for Fabrication detailing
Nice video. Can you tell me how do you get that background color? Is the setting from Acad (Options/Display/Colors/3D/Uniform background) ? Or is it a Advance Steel setting? Thank you.
its an AutoCAD command, type BACKGROUND into the command line
How can I set a layer in the advance steel dwg template that when the GA or assembly drawing dwg is created this same layer can be set turned off or frozen and not printed in the GA and Assembly dwg?
It is that some times I need to use helping beams and those should not be in the drawing and I want to set them on a layer in the model dwg that when they are being turned in to the GA or assembly dwg they do not show up there as they would be on the layer that is set frozen and not printed. An other example is with guard rail posts on corners where two guardrails meet and one post needs to be set on this layer and of course un check everything in the behavior tab.
can you please tell me the color card background ?
Use the 'BACKGROUND' command
What is the "Stanchion layout - all" style you use on your first camera position, and how do we get it? It's not in my fresh install.
@@bim-things Ah right, thanks for your reply. I'm in New Zealand. Do you recommend any similar stock detail styles for the same purpose?
Hi....where can i get this software...Advance Steel ?
www.autodesk.co.uk/products/advance-steel/overview
Dear Structural BIM,
Could you please help me. I have a connection which one I beam and one I column. Need to draw a cap on top of the column and extend to beam. This cap shall be fasten to beam by bolts.
I try to use knee connection to draw a cap and extend to beam. But I don't know how to add bolts.
Thank you very much!
Thank u a lot but my question is why revit 2017 doesn't have the connectors?
But when i connect it it appears like a line not like 2019 connectors
@@bim-things OK sir
Hello guys, does anyone know how to setup advance steel so it puts created drawings(say GA, camera drawings, parts and assembly drawings) into the model space and not in pare/layout?
It's not possible
@@bim-things thanks for your prompt reply...
@@bim-things but the real issue is that i have one camera drawing and i made couple of cuts and view details on it, but the details can't fit in the same paper/layout so i want to have them in a different paper/layout. How can i do that? Please help cause i'm new in AS.
Hi there, can you create an. mdb file of the model with AS2018?
no
That is what software please.
Advance Steel
Nice vídeo, but can you do it slower so others understand?
no the point of the video is to show the speed
who else agrees that advance steel is bullshit? tekla is way much better. Usually when it comes to structure modelling I recommend using Paint and for structural analysis I overstate the beam's dimensions so I'm pretty sure the structure is enough stiff to resist superimposed buckling and wearability deflection bending flexural stress.
clearly no one....
StructuralBIM bro I’m speaking the truth
Hello Tutor. Thanks for the tutorial, but I regret to say it didn't help me because the type of base I was getting from the connection vault was different from yours. Also, I couldn't locate the apex haunch. I am also using Advanced steel 2019. I wish you could first give a getting started tutorial. Otherwise, I wasn't helped.
Yeah, you’re going way too fast for teaching a beginner.
This is not a beginners tutorial. this video is designed to show the speed to detailing in Advance Steel. For basic tutorials, see my Getting Started playlist - th-cam.com/video/MpoA7VhiOxQ/w-d-xo.html