The magnetic drain plug makes sense, so do those drawers, along with the other things you mentioned. One of the things I did was replace my radiator with the CSF all-aluminum version. It eliminates the plastic on the OEM and increases the capacity by almost double. Plastic does fail over time, especially in hot and freezing environments. The added capacity is really helpful when going off road. Thanks, Paul!
Any time backup camera is a nice feature and not too difficult to install. It comes with a switch and allows you to turn on the rear back up camera with a button. It is particularly useful for towing a trailer.
Magnetic mounts pre-installed on the drawers & ready to install in a few minutes. I used N52 magnets so they’ll have a bit more pull strength than typical Neodymium magnets!
They were just released about 6 months ago so they’re still relatively new to the market, but they have quickly become one of my most popular items 😁 If you’ve got any questions don’t hesitate to reach out!
Thanks for the video. Figured I would run down your list of accessories: 1) Magnetic Cubby: I too think they are a great solution, but I haven't tried to put anything in that area yet. 2) TRD Skid Plate: I'm planning to get a skid plate, I love the access plate on this one, but thinking of going with steel (RCI, or Cali Raised LED) 3) Center Console Organizer: One of the first things I did! Got mine from Runnin4Tacos. Love it. 4) LED Bulbs: my 24' basically has LEDs exterior (except DRLs), but did upgrade my interior lights to LED. 5) Window Visors: Just got my visors from 4Runner Lifestyle. Didn't know about the ones you show, but 4RL are similar in they hug the curves. 6) Magnetic Drain Plug: Sounds like I need to look more into this from this trusted technician. 7) All Season Floor Mats: I had to buy the Toyota ones, they "came" with the vehicle. 8) Radio knobs: WHATTT? Those are cool! Other accessories I did that you didn't mention (or more like mods): Painted front and rear valances black (I have the TRD ORP) Exterior emblems (and the steering wheel emblem) blacked out with Yota Expedition's Topo design. I'm a sucker for topo! Also did the front grille with the YX pro style in topo. Ring from oil pan guess Can't be a piston ring, too small or rather too thick? crankshaft ring? bearing ring? For something that big to be broken in the pan would scare me! Thanks again!
I appreciate you taking the time to respond. The ring is for the outer race in the idler gear for the timing chain 😬 Gear was holding on for dear life.
I went with the egr in channel window visor I'm happy no noise and covers the whole window. Recommend getting a transmission skid plate not too heavy and extra insurance if you hit a rock or something you don't damage the pan. ❤❤❤ Great video man those magnets on the drawer is pretty cool
Now considering switching my rain guards to those, I like those much better. Have you considered switching the 12v socket to a dual usb fast charger. Toyota makes it, plug and play. I think it's worth it
@VikingsGarage i just did it on my truck a few days ago. Not too bad. Took me like 15 mins. Do they make one or something similar for the usb to the left of it that hooks up to the radio?
Im ordering those vent shades you got now, I like how they cut them to fit around the mirrors! That ring looks too small to be a piston ring.. I'm thinking it's from some kind of bearing? I'm curious to find out!! P.s. your 4runner is looking sick!! That Army green color is awesome 👌 especially with the bronze accents. When I bought mine, they didnt have any on the lot so I reserved a black sr5 premium that was "in transit". I ended up noticing a few days later they had a white 40th anniversary one "in transit" and changed my reservation to that one. I love it! Only thing is... I cant hide! 😅 Everyone texts me saying where they passed me or saw my 4runner lol Sometimes I wish I had the factory sliding tray in the trunk. I'm wondering if I can order one and install it? 🤔 Take care brother, All the best to you and yours!
Great video as usual. I would say mods that I have done to the wife’s, airbag man airbags for the rear springs. A 12 V solutions remote start all plug-in. Play uses factory key fob. the other mod any of the Trd parts I color matched the Trd logo to the body color of the vehicle instead of running red TRD.
Ok so I know it doesn’t matter, but have to ask brother….the magnetic drain plug you’re holding is coated in some black coating, but the drain plug linked to Amazon is just stainless….is it a different manufacturer that you have compared to what you have listed? Great video as usual brother! Appreciate it! Soli Deo Gloria~
Excellent point, so I’m holding a Greddy magnetic drain plug ($40), that I bought on eBay a while back. Same one is nowhere to be found anywhere else. The one I linked in Amazon, is the correct size and pitch and from the reviews it’s good quality and also only ($24.99). 🤷🏼♂️
@@VikingsGarage ahhhh ok, makes sense. Yeah i saw that it was the correct pitch, but wanted to make sure it was what you intended to list. I actually meant to do this when I got my 21’ Runner, but I got sidetracked on those valve style ones, but ultimately didn’t want to put all my faith of my 1GR-FE not blowing up on something I don’t want to be worrying about if that makes sense. So, I will be getting this one prior to my next oil change & oil sample. Appreciate the clarification brother 🤙
Great video I always enjoy your work. I love the drawers. I tried a magnetic drain plug, but the threads were not perfect. I did not want to damage the threads in the oil pan and cause more problems. so I went back to my original. I am looking for a quality magnetic drain plug. Can you suggest the one you used? It’s also the one that fits my tundra so it would be fantastic to have magnetic drain plugs again.
I appreciate your support, the one I got it’s like$40 from Greddy. Try the one on the videos description, lots of good reviews, plus it’s the correct one.
Good lost, like the visors. Im a skeptic on the drain plug but i guess it would hurt. What do think about replacing the plastic oil filter canister with an all metal ones. Car Car Nut youtube channel says the stand pipe would have to be replaced with a taller on and removing the stand pips can damage to bypass system. He says do replace it and keep the plasitc one, just dont over tighten 13lbs torque.
My 2024 4runner has USB-C ports in the back seat and USB-A ports up front. Is there a way to replace the USB-A ports in the dash with USB-C ports? Does a part from the RAV4 or Highlander maybe work and fit? Just like to standardize them all and not have adapters. Thanks.
Great stuff! Nice to see you grabbed those AJT knobs, they are out of Traverse City, Mi. I grabbed some for my FJ last month :) I did get my ass protector installed (Nilight Hitch Step), very high quality and was actually surprised on the build. Any suggestions for a bug deflector by chance? Thanks man!
Off topic but did you hear the 4runners 5gen having front timing covers leaking seeing and hearing guys on line talking about it and saying have it replaced before warranty because big $. As always thank you
How's the thickness of the knock-off skid? I've heard they tend to be thinner and under perfom on any kind of actual wear. Though that may only be with rough off roading😅
so lame they don't have an access window on that TRD skid plate. My tacoma's TRD skid plate has a window. I may order the one with the window, it's that much of a pain to get that skid plate back on.
Hey I got a question. I replaced my rear window regulator on 2011 Toyota 4Runner. Do you know how can I reset the rear window? It goes up it will close and then it comes down.
If you hold the switch up for 5 seconds and down for 5 seconds (once the window is fully closed and opened) If that doesn’t work, then something else is going on. 🤷🏼♂️
Great content again, will look at that cubby holders. VG I just did a trans fluid change dropping the pan changing the filter for the first time at 115,000 mi got out about four and a half quarts I would say what should my next intervals be going forward? Do I do every 30,000 or 60,000 dropping the pan again at 60?
@@VikingsGarageI totally agree with Not dropping the pan unless you strip the drain plug..ask me how I know. There is chance of snapping off a bolt especially in rust land.
@@VikingsGarage. Ok I see it now. It might have been the browser I was using. I was tapping on it earlier but it wasn’t opening. Thanks again for all the videos you do. I find them very useful.
@@VikingsGarage nobody would of guessed that. That’s crazy. Could of torn up the engine. Lucky for that magnetic oil drain plug then. Saved that guy some serious cash for a new engine.
@@VikingsGarageoh….thanks brother, really appreciate your time educating lay folks like myself. I have saved hundreds of dollars doing maintenance myself.
@VikingsGarage I used Launch C-reader Elite 2.0. Pretty much full Techstream functionality for $150 without subscriptions with free life time updates.
Mod to add: I have a glove box organizer, it really helps utilize that space better.
💯 Good one! 👍🏻
The magnetic drain plug makes sense, so do those drawers, along with the other things you mentioned. One of the things I did was replace my radiator with the CSF all-aluminum version. It eliminates the plastic on the OEM and increases the capacity by almost double. Plastic does fail over time, especially in hot and freezing environments. The added capacity is really helpful when going off road. Thanks, Paul!
Thank you for sharing, that is a great tip! 👏🏻
Fantastic mods! I need to get those cubbies.
💯
Awesome video Viking as usual, thank you brother
Right on 👊🏻!
More 4Runner content!!! Well done. 👍
🙏🏻👊🏻
Any time backup camera is a nice feature and not too difficult to install. It comes with a switch and allows you to turn on the rear back up camera with a button. It is particularly useful for towing a trailer.
Very cool, I don’t tow much but I like the idea. 👍🏻
I ordered the magnetic cubby’s. Thanks for the tip!
👏🏻👏🏻 Great addition !!
Those magnets on the cubby drawers are a game changer. Gonna get those.
You won’t regret it, believe me I’m picky. I love these.
Magnetic mounts pre-installed on the drawers & ready to install in a few minutes. I used N52 magnets so they’ll have a bit more pull strength than typical Neodymium magnets!
👏🏻
Suma performance convex mirrors! Worth every penny.
I’ve thought about that one. 🤔
I appreciate you sharing!
Hard to argue with this list. Saw those cubby drawers before. Might need to pick up a set of those. Thanks for the video as always!
🙏🏻I love them, very practical.
I appreciate you watching!!
They were just released about 6 months ago so they’re still relatively new to the market, but they have quickly become one of my most popular items 😁
If you’ve got any questions don’t hesitate to reach out!
Great video. I’ve actually done many of them you have listed. Next on my list is skid plate , roof basket , rims and tires
Gets expensive quick right?
Little by little.
Thanks for the video. Figured I would run down your list of accessories:
1) Magnetic Cubby: I too think they are a great solution, but I haven't tried to put anything in that area yet.
2) TRD Skid Plate: I'm planning to get a skid plate, I love the access plate on this one, but thinking of going with steel (RCI, or Cali Raised LED)
3) Center Console Organizer: One of the first things I did! Got mine from Runnin4Tacos. Love it.
4) LED Bulbs: my 24' basically has LEDs exterior (except DRLs), but did upgrade my interior lights to LED.
5) Window Visors: Just got my visors from 4Runner Lifestyle. Didn't know about the ones you show, but 4RL are similar in they hug the curves.
6) Magnetic Drain Plug: Sounds like I need to look more into this from this trusted technician.
7) All Season Floor Mats: I had to buy the Toyota ones, they "came" with the vehicle.
8) Radio knobs: WHATTT? Those are cool!
Other accessories I did that you didn't mention (or more like mods):
Painted front and rear valances black (I have the TRD ORP)
Exterior emblems (and the steering wheel emblem) blacked out with Yota Expedition's Topo design. I'm a sucker for topo!
Also did the front grille with the YX pro style in topo.
Ring from oil pan guess
Can't be a piston ring, too small or rather too thick? crankshaft ring? bearing ring? For something that big to be broken in the pan would scare me!
Thanks again!
I appreciate you taking the time to respond.
The ring is for the outer race in the idler gear for the timing chain 😬
Gear was holding on for dear life.
I went with the egr in channel window visor I'm happy no noise and covers the whole window. Recommend getting a transmission skid plate not too heavy and extra insurance if you hit a rock or something you don't damage the pan. ❤❤❤ Great video man those magnets on the drawer is pretty cool
Right on!!
I appreciate you!
Thanks for the content. Dual Batteries?
🤘🏻
About to order my AutoClover window louvers right now... thanks mate (for the info and the link) !!!
👏🏻👏🏻👏🏻 Enjoy!!
Now considering switching my rain guards to those, I like those much better. Have you considered switching the 12v socket to a dual usb fast charger. Toyota makes it, plug and play. I think it's worth it
Funny you say that, because there might be a step-by-step video coming on it. 😉
@VikingsGarage i just did it on my truck a few days ago. Not too bad. Took me like 15 mins. Do they make one or something similar for the usb to the left of it that hooks up to the radio?
That I do not know, I’ll have to look into it.
Im ordering those vent shades you got now, I like how they cut them to fit around the mirrors!
That ring looks too small to be a piston ring.. I'm thinking it's from some kind of bearing? I'm curious to find out!!
P.s. your 4runner is looking sick!! That Army green color is awesome 👌 especially with the bronze accents.
When I bought mine, they didnt have any on the lot so I reserved a black sr5 premium that was "in transit". I ended up noticing a few days later they had a white 40th anniversary one "in transit" and changed my reservation to that one. I love it! Only thing is... I cant hide! 😅 Everyone texts me saying where they passed me or saw my 4runner lol
Sometimes I wish I had the factory sliding tray in the trunk. I'm wondering if I can order one and install it? 🤔
Take care brother, All the best to you and yours!
🙏🏻
You were very close on your guess, it’s actually the outer race of the idler timing gear(which technically has a bearing in the middle)😬
Excellent video, as always!
🙏🏻 Thank you!
Great video as usual. I would say mods that I have done to the wife’s, airbag man airbags for the rear springs. A 12 V solutions remote start all plug-in. Play uses factory key fob. the other mod any of the Trd parts I color matched the Trd logo to the body color of the vehicle instead of running red TRD.
Very nice! 👍🏻
AWESOME !!!
Thank you Peter!
I actually have that tray! 😂 next should be the TRD skid plate
👏🏻
Another great video!
Thank you!
Nice job!
🙏🏻 Thank you!
Ok so I know it doesn’t matter, but have to ask brother….the magnetic drain plug you’re holding is coated in some black coating, but the drain plug linked to Amazon is just stainless….is it a different manufacturer that you have compared to what you have listed?
Great video as usual brother! Appreciate it!
Soli Deo Gloria~
Excellent point, so I’m holding a Greddy magnetic drain plug ($40), that I bought on eBay a while back. Same one is nowhere to be found anywhere else.
The one I linked in Amazon, is the correct size and pitch and from the reviews it’s good quality and also only ($24.99). 🤷🏼♂️
@@VikingsGarage ahhhh ok, makes sense. Yeah i saw that it was the correct pitch, but wanted to make sure it was what you intended to list.
I actually meant to do this when I got my 21’ Runner, but I got sidetracked on those valve style ones, but ultimately didn’t want to put all my faith of my 1GR-FE not blowing up on something I don’t want to be worrying about if that makes sense. So, I will be getting this one prior to my next oil change & oil sample. Appreciate the clarification brother 🤙
👊🏻 You got it!
Great video I always enjoy your work. I love the drawers. I tried a magnetic drain plug, but the threads were not perfect. I did not want to damage the threads in the oil pan and cause more problems. so I went back to my original. I am looking for a quality magnetic drain plug. Can you suggest the one you used? It’s also the one that fits my tundra so it would be fantastic to have magnetic drain plugs again.
I appreciate your support, the one I got it’s like$40 from Greddy. Try the one on the videos description, lots of good reviews, plus it’s the correct one.
I’ll come to your page anytime I got extra money to spend on myself 😂
😅 👊🏻
What do you think about the ARB diff breathers? It floods where I am sometimes. I guess semi often enough to make me curious.
It’s not a bad option considering your conditions
Looks like a piece of piston ring? Always enjoy your videos! Thanks.
I see what you mean, but actually it wasn’t.
It’s the outer race of the timing chain idler gear. Somehow still spinning perfectly fine 😬
Good lost, like the visors. Im a skeptic on the drain plug but i guess it would hurt. What do think about replacing the plastic oil filter canister with an all metal ones. Car Car Nut youtube channel says the stand pipe would have to be replaced with a taller on and removing the stand pips can damage to bypass system. He says do replace it and keep the plasitc one, just dont over tighten 13lbs torque.
Agreed, just keep the plastic one.
My 2024 4runner has USB-C ports in the back seat and USB-A ports up front. Is there a way to replace the USB-A ports in the dash with USB-C ports? Does a part from the RAV4 or Highlander maybe work and fit? Just like to standardize them all and not have adapters. Thanks.
Most people just run adaptors. I’m sure with finesse anything will and can be retrofitted. 🤷🏼♂️
Great tips and insights, thx 👍🏼
Your welcome!
Great stuff! Nice to see you grabbed those AJT knobs, they are out of Traverse City, Mi. I grabbed some for my FJ last month :)
I did get my ass protector installed (Nilight Hitch Step), very high quality and was actually surprised on the build.
Any suggestions for a bug deflector by chance? Thanks man!
Yeah these knobs are awesome.
So as far as wind deflector, I thought Toyota made one🤔
I know AVS does make good quality ones. 💪🏻
I went avs bug deflector on mine
👍🏻
Off topic but did you hear the 4runners 5gen having front timing covers leaking seeing and hearing guys on line talking about it and saying have it replaced before warranty because big $. As always thank you
They are pricey to reseal, but not a common issue.
How do you feel about catch cans?
It’s a must for a racing application, otherwise might be a bit overkill
^^^^ So this might be too much??
How's the thickness of the knock-off skid? I've heard they tend to be thinner and under perfom on any kind of actual wear. Though that may only be with rough off roading😅
It is a carbon copy of the OEM thickness and all. 🤷🏼♂️
@VikingsGarage Thank you that's what I was hoping. Looks like I'm gonna order it!
@harryrutland875 👏🏻👏🏻
Are those cubby drawers 3d printed?
They sure are.
so lame they don't have an access window on that TRD skid plate. My tacoma's TRD skid plate has a window. I may order the one with the window, it's that much of a pain to get that skid plate back on.
Believe me I agree with you 💯
can you add the link for that rear pocket in the cargo area to cover the holes.
Has in the holes for the subwoofer??
@@VikingsGarage yes sir!
solidifi3dllc.myshopify.com
Proper cell phone holder.
Hey I got a question. I replaced my rear window regulator on 2011 Toyota 4Runner. Do you know how can I reset the rear window? It goes up it will close and then it comes down.
If you hold the switch up for 5 seconds and down for 5 seconds (once the window is fully closed and opened)
If that doesn’t work, then something else is going on. 🤷🏼♂️
@VikingsGarage thx
It did work. Thank you so much for your help!
You’re very welcome!!
Great content again, will look at that cubby holders. VG I just did a trans fluid change dropping the pan changing the filter for the first time at 115,000 mi got out about four and a half quarts I would say what should my next intervals be going forward? Do I do every 30,000 or 60,000 dropping the pan again at 60?
👊🏻
Do it every 30k , no need to drop the pan , unless it’s leaking.
@@VikingsGarage thank you brother! You have saved me thousands!! God bless mate, next up is the 19 sequoia which needs all the same maintenance
@@VikingsGarageI totally agree with Not dropping the pan unless you strip the drain plug..ask me how I know. There is chance of snapping off a bolt especially in rust land.
@rommel-777 👏🏻👏🏻
💯👏🏻👏🏻
I can’t find the link for the ID Auto TRD Skid Plate. Can someone post the link for me? Thanks
It’s in the description of the video Sir.(second from the top)
@@VikingsGarage. Ok I see it now. It might have been the browser I was using. I was tapping on it earlier but it wasn’t opening. Thanks again for all the videos you do. I find them very useful.
🙏🏻 You’re very welcome!!
I appreciate you!!
Didn’t say and nobody mentioned in their comments what the steel circle was from. I would like to know.
Take a guess. 😉
@@VikingsGarage I know it is a seal for something but I can’t know specifically for what?
So that turned out to be the outer race of the timing chain idler gear. 😬
@@VikingsGarage nobody would of guessed that. That’s crazy. Could of torn up the engine. Lucky for that magnetic oil drain plug then. Saved that guy some serious cash for a new engine.
That broken piece, is that valve seat?
What did I miss??
@@VikingsGaragethat broken ring from your customer’s vehicle….is that a valve seat.
@Thankyou_3 oh, I got you…
No, it’s actually the outer race of the timing chain idler gear 😳
@@VikingsGarageoh….thanks brother, really appreciate your time educating lay folks like myself. I have saved hundreds of dollars doing maintenance myself.
@Thankyou_3 👏🏻👏🏻👏🏻 You’re very welcome!
piston sealing ring broken ??? uhhg with engine still running well thats a new one one me :- (
Nah, it’s actually the outer ring on the timing chain idler gear 😬
Still holding for dear life!! 🤦🏼♂️
@@VikingsGarage I have not seen that gear.. would have never known that one ! Wow. Uncommon problem I am really hoping!
Very uncommon, first time seeing this. The vehicle had over 250k miles
Cool
🤘🏻
Magnetic cubby drawers are nice, but not nice enough for me to pay $40.00 for.
The increase of functionality in that area makes sense for me. 🤷🏼♂️
Disabling the stupid seat belt ding. I left just the seat belt dash light to remind me but disabled the annoying ding ding ding ding.
I actually did that, TIS allows you to tap into it and remove that chime.
@VikingsGarage
I used Launch C-reader Elite 2.0. Pretty much full Techstream functionality for $150 without subscriptions with free life time updates.
@@VikingsGarage
I used Launch Creader Elite 2.0. It is very affordable and appears to have full Techstream functionality.