😅 As you claimed, yes!🤪😄 Fun to do something else now and then, I started my machine carrier in a small machine like this, back in 2001! Fun to experience the difference in what is now, and what was then, once and awhile!😅 Greetings back from Norway 🇳🇴
Thank you so much 😊🙏 Yes, I am still at Hæhre! I am home between shifts now, so I helped my brother out with this job!😋 Going back to work next Wednesday, after two weeks home on leave!😁
Nice finish work !! That Volvo is like a small sand box toy compared to the "390 machine" you normally operate !! Did you finish the job breaking the rocks in the earlier video ?? Does the hydraulic oil temperature run higher when using the rock hammer or does the system have the capacity to maintain temp in the NORMAL operating zone.?? Take care and stay safe from the virus, it is really bad here in the USA.
Thank you so much!🤗 Yes, it is quite small compared to the 390, almost like one feels like dressing up with the machine as a suit..😅 But it does it’s intended task with braver, operated in the right manner!😋 Jepp, I finished my task with the breaker! There was a Cat 340 that were breaking rocks with me, that continued when I put on the bucket instead! A lot of rock to break, to keep two crushers running non stop, so I had to help him a bit to get ahead of the crushers after a new blast!😅 The Cat machines maintain their hyd temp very well while operating a hydraulic breaker!😋 I have heard about other brands overheat while running a hammer, but I have never experienced it myself! The motto must be - “Cat forever”!!😄 Thank you for watching, and for your comment!🙏🤗 Stay safe yourself over there, I do keep track of the situation, hope you won’t be affected by the pandemic 😕🙂 It isn’t that bad here still, but people are getting tired by restrictions, starting to walk their own path instead of following instructions.. Difficult times, but we just have to hope for a happy ending soon!!😋
Not quite the 390 I thought I would see you in on your next video, but the results are still the same.😜👍 a clean neat well executed job done with next to no hand work needed to finish it. I also noticed the most important thing about both machines is the cab heater seems to work well. Looks like it’s getting cold over there with that white stuff on the ground. All the best to you and stay safe😜👍
Hehe, not much larger than the cabin of the 390 this one..😄 I still have some days at home before my shift starts again..😅 I was asked to help with this job, and found it nice enough to film, so I just threw it out there to make some variations in my content!🤪😁 Thank you for watching this one as well, it is fun to do some of this kind of work too!😋 Yes, it is getting cold these days, so it is nice that the heater works! Not that cold, but enough to make ice on the windows and some frost on the ground.😋 All the best back to you, and stay safe yourself!😊
Thank you!🙏😋 Yes, I have a small tripod, that fits in my pocket! Makes it easy to just put it out spontaneously, but it needs a high ground to get any overview since it’s not higher than 30 centimeters 😅 I am only filming with my phone, so it is simple to carry and set up😋
Jepp, I find it the best way to find the angles and positions I find best myself!😋 Some of my videos has been filmed by others I have given the task, but I can’t say that I have been that satisfied with the result every time .. 😅 Takes a lot of editing if positions and angles are a little wrong..😝😆 With the tripod on my own, I feel that I have better control, shooting after a plan for the result! Well, I choose phone with preference regarding the camera!😊 I feel that the result gets pretty close to a more expensive camera, so I think it gets to expensive to have both whe the difference is so small!😅 More to carry as well, so I feel that it’s better to have all I need in my pockets!😋 Less that can be ruined as well, since my days in the machines can be pretty bumpy and harsh!🤪
@@norwegianearthmovers I agree with you, I never have anyone else recording my videos because they wouldn't do it the way I like it done. Finding good angles and knowing what to record if not something everyone can do. There is an art to recording as well. My opinion is that you should keep changing the angles like you did in this video because it makes it more interesting to watch.
Thank you for your thoughts and advice!🙏😋 I must admit, that I haven’t been that focused on quality earlier.. My last 390 video, was the first I ever ran through a edit program, and ever since I have been trying to learn and evolve.😄 I have finally found a edit program that I like, and feel that this makes it easier to put the camera in different positions, knowing the possibilities to put the clips together to a film!😊 This video was a test of the program and myself, to see what’s possible.🤪 Think that I will take your advice, showing several angles in the future! In the past, I was only focusing on showing what the machines I operate can do with me by the sticks..😅 Now, it’s almost as fun to cut and edit!😄
That was very precise craftsmanship you did.
Thank you for your kind review!🙏😊 I do my best all the time, hopeful of succeeding in a proper manner!😋 I get a good feeling when it’s recognized!🤗
...and now something completly different!👌😁👍
Greetings from Finland 🇫🇮
😅 As you claimed, yes!🤪😄 Fun to do something else now and then, I started my machine carrier in a small machine like this, back in 2001!
Fun to experience the difference in what is now, and what was then, once and awhile!😅
Greetings back from Norway 🇳🇴
Nice grade work!
Thank you!🙏🤗
Class act! Are you still working for Haehre?
Thank you so much 😊🙏 Yes, I am still at Hæhre! I am home between shifts now, so I helped my brother out with this job!😋
Going back to work next Wednesday, after two weeks home on leave!😁
Nice finish work !! That Volvo is like a small sand box toy compared to the "390 machine" you normally operate !! Did you finish the job breaking the rocks in the earlier video ?? Does the hydraulic oil temperature run higher when using the rock hammer or does the system have the capacity to maintain temp in the NORMAL operating zone.??
Take care and stay safe from the virus, it is really bad here in the USA.
Thank you so much!🤗 Yes, it is quite small compared to the 390, almost like one feels like dressing up with the machine as a suit..😅
But it does it’s intended task with braver, operated in the right manner!😋
Jepp, I finished my task with the breaker! There was a Cat 340 that were breaking rocks with me, that continued when I put on the bucket instead! A lot of rock to break, to keep two crushers running non stop, so I had to help him a bit to get ahead of the crushers after a new blast!😅
The Cat machines maintain their hyd temp very well while operating a hydraulic breaker!😋 I have heard about other brands overheat while running a hammer, but I have never experienced it myself!
The motto must be - “Cat forever”!!😄
Thank you for watching, and for your comment!🙏🤗
Stay safe yourself over there, I do keep track of the situation, hope you won’t be affected by the pandemic 😕🙂 It isn’t that bad here still, but people are getting tired by restrictions, starting to walk their own path instead of following instructions.. Difficult times, but we just have to hope for a happy ending soon!!😋
Not quite the 390 I thought I would see you in on your next video, but the results are still the same.😜👍 a clean neat well executed job done with next to no hand work needed to finish it. I also noticed the most important thing about both machines is the cab heater seems to work well. Looks like it’s getting cold over there with that white stuff on the ground. All the best to you and stay safe😜👍
Hehe, not much larger than the cabin of the 390 this one..😄 I still have some days at home before my shift starts again..😅 I was asked to help with this job, and found it nice enough to film, so I just threw it out there to make some variations in my content!🤪😁
Thank you for watching this one as well, it is fun to do some of this kind of work too!😋
Yes, it is getting cold these days, so it is nice that the heater works! Not that cold, but enough to make ice on the windows and some frost on the ground.😋
All the best back to you, and stay safe yourself!😊
Nice camera angles, are you using a tripod?
Thank you!🙏😋 Yes, I have a small tripod, that fits in my pocket!
Makes it easy to just put it out spontaneously, but it needs a high ground to get any overview since it’s not higher than 30 centimeters 😅
I am only filming with my phone, so it is simple to carry and set up😋
@@norwegianearthmovers That's a good, simple setup. I use a tripod too sometimes but less lately. Your phone sure takes some high quality video.
Jepp, I find it the best way to find the angles and positions I find best myself!😋
Some of my videos has been filmed by others I have given the task, but I can’t say that I have been that satisfied with the result every time .. 😅 Takes a lot of editing if positions and angles are a little wrong..😝😆 With the tripod on my own, I feel that I have better control, shooting after a plan for the result!
Well, I choose phone with preference regarding the camera!😊 I feel that the result gets pretty close to a more expensive camera, so I think it gets to expensive to have both whe the difference is so small!😅 More to carry as well, so I feel that it’s better to have all I need in my pockets!😋
Less that can be ruined as well, since my days in the machines can be pretty bumpy and harsh!🤪
@@norwegianearthmovers I agree with you, I never have anyone else recording my videos because they wouldn't do it the way I like it done. Finding good angles and knowing what to record if not something everyone can do.
There is an art to recording as well.
My opinion is that you should keep changing the angles like you did in this video because it makes it more interesting to watch.
Thank you for your thoughts and advice!🙏😋
I must admit, that I haven’t been that focused on quality earlier.. My last 390 video, was the first I ever ran through a edit program, and ever since I have been trying to learn and evolve.😄 I have finally found a edit program that I like, and feel that this makes it easier to put the camera in different positions, knowing the possibilities to put the clips together to a film!😊
This video was a test of the program and myself, to see what’s possible.🤪 Think that I will take your advice, showing several angles in the future!
In the past, I was only focusing on showing what the machines I operate can do with me by the sticks..😅 Now, it’s almost as fun to cut and edit!😄
👍👍
Bra film og pent resultat 🙂
Tusen takk!🙏😋