How to Replace Rear Bumper 2007-2014 Chevrolet Silverado 2500 HD

Buy Now!
New Bumper from 1AAuto.com 1aau.to/ib/1ABB...
This video shows you how to install a new rear bumper from TRQ on your 2007-2014 Chevrolet Silverado 2500 HD. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 2500 HD
2008 Chevrolet Silverado 2500 HD
2009 Chevrolet Silverado 2500 HD
2010 Chevrolet Silverado 2500 HD
2011 Chevrolet Silverado 2500 HD
2012 Chevrolet Silverado 2500 HD
2013 Chevrolet Silverado 2500 HD
2014 Chevrolet Silverado 2500 HD
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obj5/1A...
• 17mm Socket 1aau.to/obvi/1A...
• 21mm Socket 1aau.to/oaha/1A...
• 22mm Socket 1aau.to/oos/1AX...
• Trim Tool Set 1aau.to/oacd/1A...
• Ratchet 1aau.to/obBw/1A...
• Socket Extensions 1aau.to/obvi/1A...
• Torque Wrench 1aau.to/oaEY/1A...
• Gloves 1aau.to/o72/1AX...
• Safety Glasses 1aau.to/oZe/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@thomasbehne6486]

My hitch bolts were a 21mm......on my 08.

[@paulmoody1859]

Just a note....it would be much simpler to take the hitch pin and receiver off before going after those rear bolts.

[@AdamBruck-ud4xt]

Very helpful and to the point.thank you!

[@michaelmunter8074]

Can this be done on a 2015 Silverado 2500?

[@TRQ]

+@michaelmunter8074 Yes, here's the how-to video you're looking for: th-cam.com/video/QLhOl0ZhaOY/w-d-xo.html

[@danielb-c9100]

What if you have back up sensors