RC BOAT DIY PROPELLER FROM OLD COIN PART 2
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2021
- Materials:
-Old coin for the blade
-Brass coupler 4mm ID 8mm OD
Tolls:
-Soldering iron 60w
-Lead
-Iron file
-sand paper 1000 grit
-Pliers or Long nose Pliers
Please subscribe, like and share.
Thank you very much.
👍👍👍👍👍
Excellent job
Thank you very much!
You need to remove from the center , the round part , the hub . Good try
Exactly. The blades are horizontal on the balancer. The center hub is where the out of balance is occurring.
May part 2 na pla..
😁😁😁😁
Grabe ang ayus boss napaka ganda yan
Thanks boss
@@magercboat3240 magkano bah pagawa nyan bos
@@magercboat3240 sulda lang bayan boss
Pede naman po pm nyo po ko,,
@@magercboat3240 cge boss ano fb name mo
bossing pag poba rigger di po sya taubin? v hull po sana gagawin ko then sa dagat ko papatakbuhin
Sir kung dagat sir masmaganda vhull or cat, ang rigger sir mahina sa alon
Anyways sir nagbebenta ba kayo ng propeller? 4mm po hole.
@@jenneltuddao9703 pagpang rc d sir, mahina ang hinang sir, baka masiraan lng kayo sir,,