Bakgat!! That is going to keep my lady’s safe from the foxes!! Can you also add the parts you bought and a rough indication of the overall costs for the components. I always knew you were a bloody genius in disguise 🥸👊
Parts needed are all indicated on the schematic. But here is the list: 1 x Arduino Nano R3 - www.communica.co.za/products/hkd-nano 1 x L293 motor controller - www.botshop.co.za/product/l293d-motor-driver-ic/ 1 x DS3231 Real Time Clock - www.botshop.co.za/product/ds3231-rtc-module/ 1 x Photo resistor - www.botshop.co.za/product/photoresistor-ldr-4-7kohm-5mm-diameter/ 1 x Magnetic reed switch - www.communica.co.za/products/bmt-magnetic-sensor-switch 1 x Push button - www.communica.co.za/products/pb11c02-red 1 x LED 2 x 10k Ohm resistor 1 x 220 Ohm resistor 1 x Worm gear 12V DC motor 90rpm - www.communica.co.za/products/cmu-worm-gear-motor-12v-90rpm 1 x Transformer - 220VAC input to 12V, 1.5A output (old router transformer was used) 1 x Experimental board Dot - www.communica.co.za/pages/search-results-page?q=Experimental+board+Dot Total cost roughly R500 (South Africa).
![CAMPปลิ้น | EP.83[2/2] ประสบการณ์ขนหัวลุกจากตำนานวงการผี!](http://i.ytimg.com/vi/T_kFecQw7Ds/mqdefault.jpg)
Lekker, Don.
Bakgat!! That is going to keep my lady’s safe from the foxes!!
Can you also add the parts you bought and a rough indication of the overall costs for the components.
I always knew you were a bloody genius in disguise 🥸👊
Parts needed are all indicated on the schematic. But here is the list:
1 x Arduino Nano R3 - www.communica.co.za/products/hkd-nano
1 x L293 motor controller - www.botshop.co.za/product/l293d-motor-driver-ic/
1 x DS3231 Real Time Clock - www.botshop.co.za/product/ds3231-rtc-module/
1 x Photo resistor - www.botshop.co.za/product/photoresistor-ldr-4-7kohm-5mm-diameter/
1 x Magnetic reed switch - www.communica.co.za/products/bmt-magnetic-sensor-switch
1 x Push button - www.communica.co.za/products/pb11c02-red
1 x LED
2 x 10k Ohm resistor
1 x 220 Ohm resistor
1 x Worm gear 12V DC motor 90rpm - www.communica.co.za/products/cmu-worm-gear-motor-12v-90rpm
1 x Transformer - 220VAC input to 12V, 1.5A output (old router transformer was used)
1 x Experimental board Dot - www.communica.co.za/pages/search-results-page?q=Experimental+board+Dot
Total cost roughly R500 (South Africa).
@@donconnan3380 Good stuff! What’s your hourly rate?! 😅
Lekker project for your boys ;)