Products that we use and recommend: ► MAF Cleaner: amzn.to/2jRPj6F ► Panel Removal Set: amzn.to/3YiMADu ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
I love that they are honest, I would still pay to have the sensors cleaned if they were honest and had a good price I know it’s still hard work you gotta remove the pan and clean everything out plus refill tranny it’s a messy job. I can appreciate an honest mechanic ❤
No the TCM/TCU already has it's parameters preprogrammed. Depending on the vehicle (like Mercedes) you may need STAR software to take it out of safe/limp mode. With Audi/VW you clear it with Vagcom.
thanks for taking the time to explain this topic. I found it very helpfull as I have the solenoids from a 6R80 transmission sitting on the work bench with a metal contamination problem.thanks again.
Yes I cleaned them ,but didn't fix the problem completely and ended up buying a complete , new valve body from Ford and now drives like a new car again .
Just changed the TSS & OSS sensors in my 08' Ford Edge and now it wont shift out of first and gives me codes P0760 and P0763, both concern solenoid "C". After watching your video I think I'm going to pull the Transmission Valve Body Solenoid Module back out and try this MAF sensor cleaner before I take it to a shop. I have a new wiring harness on order which I want to also put in before considering a shop. The existing one seems loose where it connects to the body side of the wiring, so it may be shorting out. Any tips or advice from ANYONE would be much appreciated at this point.
Hello greetings from indonesia....would like to drop u a question... is measuring resistance of the solenoid valve (Mv1 2 and 3) a right way to decide whether or not to replace the valves?
Thank you for the tip that's what I'm gonna check on my 2005 Mazda B 2300, It's not a matic but I have to drive it like a standard To get going 2nd year there dear 4th gear. If I just put it into drive just ribs and barely crawls
Want to replace shift solenoids on 2008 Fusion. Have replaced the 3 smaller ones but can't get the other larger 3 replaced because I can't get the retainer clip off. Can I remove the valve body without any problems to replace those three?
Any videos on the Peugeot 407 v6 gearbox solenoids video's with the 6 speed TF80 transmission, also called an AM6 i believe want to change the solenoids believe there are 8 and any help on where to purchase tidy ones don't want it going bad after 6 months thanks John .
Hi new to ur channel, I have a Mazda protege hold light was coming on got that fixed then it's reversing but not driving forward,what's the problem? Can it be the pump in the transmission?
I have a 2004 dodge Durango.rhe rhing will not move out of no we're we had the rear end gears changed two days later the transmission with stopped working ..wll together
Are you guys located in soCal or NorCal? I watch your videos faithfully but I need some help!!!!!E60/n52/6hp19 225k. kid reset my adaptions and now I get 4f8a, ratio monitoring and limp mode. I can clear in INPA and drive in manual. Got filter/pan/solenoids sleeves and seals coming ($700.00). Do you think that think could fix the issue. I do not know the service history on the car
I love your channel. I wish I could send you some money. All the money you saved me. I feel like I owe you . I bought 2098 Nissan Armada V8 5.6 it goes in reverse but it rolls back just a little and stops. What do I do?
i have a 2013 veloster... when i start the car if it dont start right away .. it causes the transmission to not shift .. i can out the shifter in drive or reverse and it doesnt engage.. what would be the problem there? thanks for any help
What would happen if I changed the transmission fluid after it not being serviced for awhile and it starts slipping high revving by replacing or cleaning the solenoids fix this issue ?
Funny how that works isnt it? Seen it before. If only the tranny had a DRAIN PLUG, we would never neglect them. Then the dipshits at the local kwikylube would pull the wrong plug when changing motor oil.🙄
That's why you always save the old fluid just in case it starts to slip after changing the fluid. That way if there is a problem you just drain out the new fluid and put the old fluid back in. You can't do that if you no longer have the old fluid. This is a good practice as a good backup insurance policy.
I have a 2003 rx 300 Lexus transmission problems 1. P0741 Torque Converter Solenoid performance or stuck on off. 2.p0330(1/12) Stored Knock Sensor 2 Circuit (Bank2)DTC Sereveritiy 2 of 3 says Repair immediately if drivability issues are present treat to
The codes are from o,really tester I used to find out exactly what went wrong with my transmission, that is what I texted to you. My question is how to fix it, what will it me , and is it serious if not . How much will it cost to put it in the shop ?
what voltage can you use on the pressure solenoids to see if they move. i have done the ohm check but does it move or is it stuck. so what voltage can i apply the the other solenoids
Hi there, i have 07 750li with zf6hp26 trans,my vehicle start going into park from drive aftere vehicle worm up,will not do it when it's cold, error code iam getting is 4E89 SV 1 or SV 2 mechanically jammed.Have you seen a code error like this. I replaced all mechatronic sleeves and all solenoids, followed fill procedure engine off ,engine running at 40c .Reset adaptation,still having the same problem.I recently replaced the valvebody with used one but i used my old TCM module installed on it. because I couldn't flash the one that came with the used valvebody ,still have same problem same error code. could you please help me with this problem what it could be.thanks.
Bonjour messieurs !! J'ai besoin d'aide concernant ma Peugeot 407 . Le moteur n'accelère pas lorsqu'on met en départ ou en marche arrière. Nous ignorons le problème, on souhaiterait vraiment avoir de l'aide
Sir the car transmission is making whinning noise, and delays in shifting. I checked for the fuel level is Ok, I checked for the oil still fresh not burned, I checked for any leaks no any leaks, I open the pan, but there were no any metal shavings on the magnets no any particles on the fluid, I decided to change the transmission filter, I checked and open the valve body no any clogs on the passages, I removed all solenoids I tested them all, and one was not working, I changed it with new one, I put back everything I test drive the vehicle no more whinning noise at all and shifting gears smoothly, but after two days as i drive reaching speed of 100 mph, the whinning noise started again, and the car struggles to exceed speed of 100mph, the RPM goes high and the speed is not achieved, what can be the problem, and what can be done sir? Kindly help with ideas.
It could be one of many things that has to do with your emission system. Old air filters are usually the cause, or a crack in the headers/exhaust pipe before getting to your catalytic converter. The catalyst in the converter itself might be going bad which requires replacement of said catalytic converter. Or your EGR valve might be clogged with residue
sir..my kia forte look like not starting in first gear.. and i feel my forte dont have the fourth gear .only second gear and third only when the mechanic scan..they got the problem solenoid..its that true sir.. and to solve the problem..are we need to change the solenoid..?? thank you sir
@@99centstoreful yes,new sparkplug cables ,new sparkplugs ,new air engine filter,new transmission oil.check the old transmission oil if it is dark then change it immediately. after all that look how the car will do next.when you have a new transmission oil drive for a few hundred miles and then check the color of the oil if it is getting dark again it means the new oil is washing up cleaning the transmission.continue driving for a few thousand miles and then change the oil again. please note that se garages claim they can change your transmission oil but in reality they replace it 40% of the old oil and thry just add new 40%oil.this is scam. my garage admitted this the last time I changed my oil.now they claim they have a machine thay flushes thebold oil and take out 90% of the old oil and I observed the cleaning and replacement of the oil myself.
I always soak my Evo X SST solenoids in break cleaner for an hour than demagnetise them before testing them and if they test bad than I replace them. No point doing this job over and over if you can just replace solenoids.
@@stephencook7337 if they are already out of the car, it's alot cheaper to replace them then and there. Otherwise you will be doing this process all over again when it's hot.
My e46 downshifts hard to 2nd and 1st , only when it is running cold , and sometimes 2nd or 1st slips , so the transmission goes back to 3rd , even when I try driving it in manual mode . Changed the transmission filter and fluid , fixed it a little but it came back . Any suggestions ?
@@pashapepic8876 yeah , I injected some kind of chemical into the transmission fluid , it cleaned the valves or the solenoids 🤷🏻♂️ one of them or whatever the transmission has . So guess all that worked cz once I changed the oil filter , was a significant change
and hoping that just a hand on cleaning will fix something this technical is a joke as soon as its run again even with a fluids change will be gone.. video is a joke...
sheesh when ya gonna make a how to video DON"T use somebody that has a heavy accent and uses a word, in this case guy, over and over and does not call thing by the wrong name a bolt is not a screw and a multi meter is not a volt/ohm meter which will confuse the hell outta folks.. wake up
A multi-meter is a volt/ohm meter. As well as other things but it is that for sure. I think those "bolts" can also be called screws because there is no nut attached, its kind of a grey area but I don't think he is wrong calling it a screw. And who really gives a flying fcuk? We knew what he was talking about.
I have a 6t40 transmission. It goes into reverse 1st and 2nd but no 3rd,4th,5th, gear.. i take the car to 45mph in manual.. then shift the car to drive and seems like it is jumping in between gears.. no check engine light.. do you know what could be the problem?
Products that we use and recommend:
► MAF Cleaner: amzn.to/2jRPj6F
► Panel Removal Set: amzn.to/3YiMADu
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Nice
Shops are going to hate you for educating the public, thank you so much ✌️
I agree, and yet they can’t do shiiiiii about it lol
I love that they are honest, I would still pay to have the sensors cleaned if they were honest and had a good price I know it’s still hard work you gotta remove the pan and clean everything out plus refill tranny it’s a messy job. I can appreciate an honest mechanic ❤
Definitely do this before applying direct 12v power directly to these, I ruined all 3 of my control solenoids doing that.
You can cycle / test with a 9v battery.
Ford dealership said trans is fd, $3500. Took it to my local auto trans specialist $500. Are dealerships scammers!?
Called stealerships for a reason
What did they do?
yup
Mass air flow cleaner... great idea. Thanks
good job! transmission oil only can be change every 5k miles, to avoid problems.
JUST LOVE THIS CHANNELS OF THESE GUYS
Thank you sir for your kindness I learned how to fix my car Dallas Texas
This worked?
Is it necessary to reset the transmission "learning mode" in programing after cleaning solenoids or is that strictly with using new solenoids?
No the TCM/TCU already has it's parameters preprogrammed. Depending on the vehicle (like Mercedes) you may need STAR software to take it out of safe/limp mode. With Audi/VW you clear it with Vagcom.
thanks for taking the time to explain this topic. I found it very helpfull as I have the solenoids from a 6R80 transmission sitting on the work bench with a metal contamination problem.thanks again.
I’m having a hard shift when I come down from first gear did cleaning those out work thank you
Yes I cleaned them ,but didn't fix the problem completely and ended up buying a complete , new valve body from Ford and now drives like a new car again .
Thank you for the reply back so you just bought the valve body with the new solenoids on it and that’s it and use the old leaf spring
Not sure what old leaf spring is?
I meant lead frame.phone spellcheck sorry
Great video, watching from Yorktown Texas 👏👏
i love your informative videos my friend. Stay safe and healthy.
Great 👌 video, my 09 Mazda premacy Act up in second and reverse, it's a 5 speed, witch solaniod to check, where is it located
Thank you sir, your videos are very helpful.
Watching from Nigeria. Nice tutorial
Awesome video! Which trans is this? I have the same. 6T45??
Just changed the TSS & OSS sensors in my 08' Ford Edge and now it wont shift out of first and gives me codes P0760 and P0763, both concern solenoid "C". After watching your video I think I'm going to pull the Transmission Valve Body Solenoid Module back out and try this MAF sensor cleaner before I take it to a shop. I have a new wiring harness on order which I want to also put in before considering a shop. The existing one seems loose where it connects to the body side of the wiring, so it may be shorting out.
Any tips or advice from ANYONE would be much appreciated at this point.
Hello greetings from indonesia....would like to drop u a question... is measuring resistance of the solenoid valve (Mv1 2 and 3) a right way to decide whether or not to replace the valves?
THANK-YOU VERY MUCH SIR , GREAT WORK !!
Thank you for the tip that's what I'm gonna check on my 2005 Mazda B 2300, It's not a matic but I have to drive it like a standard To get going 2nd year there dear 4th gear. If I just put it into drive just ribs and barely crawls
In this case, this process fix the isue?
You guys are AWESOME!!!
What about submerge the solenoid on cleaner and let it sit for 20 minutes then start back and forward with the 9V battery for a certain time?
Are them the same for a Chevic Sonic 2013?
What can I use to clean the valve body and inside the transmission what product is safe
Hii bro iv two solenoids on my toyota vista.wich one is the shift solenoid?
Want to replace shift solenoids on 2008 Fusion. Have replaced the 3 smaller ones but can't get the other larger 3 replaced because I can't get the retainer clip off. Can I remove the valve body without any problems to replace those three?
Can you fix my car? I am right not located in St. Louis. I am transmission problem as you have mentioned. Nissan Altima 2015 S
Take a shot every time he says "guys"
😂
I wish that I could speak his native language as well as he speaks English .
Do you need to demagnetise the solenoids before cleaning?
YES AFTER U RECALIBRATE YOUR FLUX CAPACITOR USING A 3 DIMENTIONAL OSSELESCOPE !! X,Y & Z PHASE PATTERN .
@@rogervonschleusingen4603
WTF
@@rogervonschleusingen4603 🤣
Let's play a drinking game. Every time he says "guys" take a shot.
I'm dead, writing from heaven after 1 minute of this video
Excellent video, thank you.
Why would GM put the transmission filter in such a place to take the transmission out and then disassemble it?
So that you have to buy a new car sooner.
Certainly is ridiculous.
You would be shocked how many car companies do this bs
Find the engineers and slap them in the face. Mechanics around the world will rejoice.
Planned obsolescence. This is on purpose. Buy Toyota.
Awesome explanations
Vw polo 9n1 BKY engine 1.4 any video for removing solenoid and cleaning or replacing them?
you guys rock keep it up!!!!!
Do we need to program transmission after replacing soronide in chevrolet cruze 2012 model
If its the same tcm no cause your just changing soleniods not transmission control module 👍
@MG-of4nw thank you very much
P2709 shift solenoid ss f electrical.
Any Body knows explain . And location . Thank you please
Very helpful
Any videos on the Peugeot 407 v6 gearbox solenoids video's with the 6 speed TF80 transmission, also called an AM6 i believe want to change the solenoids believe there are 8 and any help on where to purchase tidy ones don't want it going bad after 6 months thanks John .
Hello! What reading would I get for solenoids in a mazda 5 2005 transmission to know that they aren't bad?
Hi new to ur channel, I have a Mazda protege hold light was coming on got that fixed then it's reversing but not driving forward,what's the problem? Can it be the pump in the transmission?
How did you bleed the air from the transmission solenoid? I have the same transmission but I have air in the lines.
It would be forced out by the trans fluid.
Make sure you not low on fluid, warm up car, check level again and cycle shifter through all gears with brakes on.
I have a 2004 dodge Durango.rhe rhing will not move out of no we're we had the rear end gears changed two days later the transmission with stopped working ..wll together
Are you guys located in soCal or NorCal? I watch your videos faithfully but I need some help!!!!!E60/n52/6hp19 225k. kid reset my adaptions and now I get 4f8a, ratio monitoring and limp mode. I can clear in INPA and drive in manual. Got filter/pan/solenoids sleeves and seals coming ($700.00). Do you think that think could fix the issue. I do not know the service history on the car
I love your channel. I wish I could send you some money. All the money you saved me. I feel like I owe you . I bought 2098 Nissan Armada V8 5.6 it goes in reverse but it rolls back just a little and stops. What do I do?
Did you ever figure out the issue? Having same problems with a Titan
i have a 2013 veloster... when i start the car if it dont start right away .. it causes the transmission to not shift .. i can out the shifter in drive or reverse and it doesnt engage.. what would be the problem there? thanks for any help
I have Hyundai ix35 with slip gear what do I do pls
Does shifter solenoid rattle i removed mine and it rattles sound when i move it from side to side
Help please my 2005 bmw 745 li everytime I try to punch the gas pedal to go faster it goes into failsafe mode and I have no codes
Thanks
Hi bro my toyota vista is not shit to 3rd and up bro..what is the fault?
What would happen if I changed the transmission fluid after it not being serviced for awhile and it starts slipping high revving by replacing or cleaning the solenoids fix this issue ?
Funny how that works isnt it? Seen it before. If only the tranny had a DRAIN PLUG, we would never neglect them. Then the dipshits at the local kwikylube would pull the wrong plug when changing motor oil.🙄
That's why you always save the old fluid just in case it starts to slip after changing the fluid. That way if there is a problem you just drain out the new fluid and put the old fluid back in. You can't do that if you no longer have the old fluid. This is a good practice as a good backup insurance policy.
Nice information
thank u guys
I have a 2003 rx 300 Lexus transmission problems 1. P0741 Torque Converter Solenoid performance or stuck on off. 2.p0330(1/12) Stored Knock Sensor 2 Circuit (Bank2)DTC Sereveritiy 2 of 3 says Repair immediately if drivability issues are present treat to
The codes are from o,really tester I used to find out exactly what went wrong with my transmission, that is what I texted to you. My question is how to fix it, what will it me , and is it serious if not . How much will it cost to put it in the shop ?
Hi its Becky can you tell me anything
Thanks for the video bro.
Nice video
Is this able to be done on a 2008 Ford Edge..? I have a P0770 code
Hy,, can I used petrol to clean it ,,please help
Hi Bro, I changed the transmission fluid of chevrolet cruze 2012. After I changed fluid, chevrolet did not move how to fix it.
Did you ever find out the issue.
what voltage can you use on the pressure solenoids to see if they move. i have done the ohm check but does it move or is it stuck. so what voltage can i apply the the other solenoids
9V battery will work.
Thank you.
thanks homie!
Guys
Hi there, i have 07 750li with zf6hp26 trans,my vehicle start going into
park from drive aftere vehicle worm up,will not do it when it's cold,
error code iam getting is 4E89 SV 1 or SV 2 mechanically jammed.Have
you seen a code error like this. I replaced all mechatronic sleeves and
all solenoids, followed fill procedure engine off ,engine running at 40c
.Reset adaptation,still having the same problem.I recently replaced the
valvebody with used one but i used my old TCM module installed on it.
because I couldn't flash the one that came with the used valvebody
,still have same problem same error code. could you please help me with
this problem what it could be.thanks.
Can you clean with pressurised air from a compressor?
not recommended
Can we do this with a bmw 330i 2005?
Arturo cómo me puedes ayudar a ver un diagrama electrónico de un Chevy Monza 2002
Bonjour messieurs !! J'ai besoin d'aide concernant ma Peugeot 407 . Le moteur n'accelère pas lorsqu'on met en départ ou en marche arrière. Nous ignorons le problème, on souhaiterait vraiment avoir de l'aide
Hey, How can I find out what's the resisting on a transmission solenoid? I have a 06 Mazda 3 2.0 Thank you in advance
Find the model number of your transmission (stamped or look up by model/year) and do a search for that transmission's shift solenoid resistance chart.
Sir the car transmission is making whinning noise, and delays in shifting. I checked for the fuel level is Ok, I checked for the oil still fresh not burned, I checked for any leaks no any leaks, I open the pan, but there were no any metal shavings on the magnets no any particles on the fluid, I decided to change the transmission filter, I checked and open the valve body no any clogs on the passages, I removed all solenoids I tested them all, and one was not working, I changed it with new one, I put back everything I test drive the vehicle no more whinning noise at all and shifting gears smoothly, but after two days as i drive reaching speed of 100 mph, the whinning noise started again, and the car struggles to exceed speed of 100mph, the RPM goes high and the speed is not achieved, what can be the problem, and what can be done sir? Kindly help with ideas.
100mph WHAT THE F***
Beautiful
I have a code P0731 on a Hyundai Elantra. Can someone please tell me which is first gear solenoid or how to spot it?? Thanks I’m advance
It could be one of many things that has to do with your emission system. Old air filters are usually the cause, or a crack in the headers/exhaust pipe before getting to your catalytic converter. The catalyst in the converter itself might be going bad which requires replacement of said catalytic converter. Or your EGR valve might be clogged with residue
This is ford 10 speed transmission?
Can this work for mercedes
Hi
Do We need to program after replacing faulty solenoid on 722.9 transmission or replacing solenoid doesn't need programming.
Thank you
Yes must reprogram after solenoid is changed with a new one
sir..my kia forte look like not starting in first gear.. and i feel my forte dont have the fourth gear .only second gear and third only
when the mechanic scan..they got the problem solenoid..its that true sir..
and to solve the problem..are we need to change the solenoid..??
thank you sir
Sir pleaz Bangladesh lenguech added
Make sure that your air filter and plugs are in great condition before proceeding!!
So change filter n spark plugs , then this procedure , correct?
@@99centstoreful yes,new sparkplug cables ,new sparkplugs ,new air engine filter,new transmission oil.check the old transmission oil if it is dark then change it immediately.
after all that look how the car will do
next.when you have a new transmission oil drive for a few hundred miles and then check the color of the oil if it is getting dark again it means the new oil is washing up cleaning the transmission.continue driving for a few thousand miles and then change the oil again.
please note that se garages claim they can change your transmission oil but in reality they replace it 40% of the old oil and thry just add new 40%oil.this is scam.
my garage admitted this the last time I changed my oil.now they claim they have a machine thay flushes thebold oil and take out 90% of the old oil and I observed the cleaning and replacement of the oil myself.
COVID-19 at 4,30 God Bless You camera man.
Great video by the way!
Thanks
anyone lose the reverse after changing the solenoids?
I did, what did you do to get it fixed?
I always soak my Evo X SST solenoids in break cleaner for an hour than demagnetise them before testing them and if they test bad than I replace them.
No point doing this job over and over if you can just replace solenoids.
The whole point of this is to save money. Obviously not guaranteed to work, but worth the try if you want to save money.....
@@stephencook7337 if they are already out of the car, it's alot cheaper to replace them then and there.
Otherwise you will be doing this process all over again when it's hot.
Good jop
My e46 downshifts hard to 2nd and 1st , only when it is running cold , and sometimes 2nd or 1st slips , so the transmission goes back to 3rd , even when I try driving it in manual mode . Changed the transmission filter and fluid , fixed it a little but it came back . Any suggestions ?
Mine does the same think did u ever find out what was wrong?
@@pashapepic8876 yeah , I injected some kind of chemical into the transmission fluid , it cleaned the valves or the solenoids 🤷🏻♂️ one of them or whatever the transmission has . So guess all that worked cz once I changed the oil filter , was a significant change
When it’s jerky downshift from 2nd to 1st it can also be a bad transmission sleeve seal
@@JoseMartinez-us2ke got any video suggestion to watch ? Would check it out for sure
How can you understand what he's saying 😂
He knows his stuff, after the 4th video it's no issue.
👍🏻🙏🏻😀
guysguysguysguysguysguysguysguys
and hoping that just a hand on cleaning will fix something this technical is a joke as soon as its run again even with a fluids change will be gone.. video is a joke...
a good hands on cleaning can fix a bunch of techincal problems. Shit even the fluid change alone can fix a bunch of problems.
P2709
that vehicle hes working on is a trash vehicle
sheesh when ya gonna make a how to video DON"T use somebody that has a heavy accent and uses a word, in this case guy, over and over and does not call thing by the wrong name a bolt is not a screw and a multi meter is not a volt/ohm meter which will confuse the hell outta folks.. wake up
A multi-meter is a volt/ohm meter. As well as other things but it is that for sure. I think those "bolts" can also be called screws because there is no nut attached, its kind of a grey area but I don't think he is wrong calling it a screw. And who really gives a flying fcuk? We knew what he was talking about.
I don't care... he's helping others plus Europeans who can speak English usually can can speak 3 languages at least.
@@rcypert That's because he's a flag waving half witted simpleton.
Jeez, I wonder what crawled down his britches and tickled his tootsie
Thanks so much.
How can I get my faulty solenoid for Toyota Avalon 2005.
I have a 6t40 transmission. It goes into reverse 1st and 2nd but no 3rd,4th,5th, gear.. i take the car to 45mph in manual.. then shift the car to drive and seems like it is jumping in between gears.. no check engine light.. do you know what could be the problem?