Building an Awesome Truck Awning!!
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- In this video, I show you how to build an ARB awning for much less!
Instagram: @patrickgrem @DIYRTT
::: Support the Channel! :::
/ remingtonbuilds
teespring.com/...
Subscribe:
/ @patrickremington
DIY Rooftop Tent Community Group / 376952322867430
Instagram: www.instagram....
::::::::::::::::LINKS:::::::::::::
Spring Clips 6mm
www.amazon.com...
Buckles!
www.amazon.com...
Webbing!
www.amazon.com...
Vinyl Fabric!
www.amazon.com...
#overlanding #ARB #Awning
![PURPEECH - นี่ฉันเองคนที่... (It's me) [Official MV]](http://i.ytimg.com/vi/NuhHd0hOOg8/mqdefault.jpg)
The best diy awning I've seen so far. And I've seen a lot.
Thank you! 🙏🙏🙏
i agree
Nice awning, simple design, easy set up. Very easily sourced materials. Thanks for the video.
I would like to see you do a diy build on a pop out shower stall and shower heated by solar. I see some made out of big pvc or abs pipe and they pressurize them with air, I have also seen one that was a military water can with a submersible 12vdc water pump.
Thanks again for the video.
hell yeah!
I put one on my 8' truck topper. But, I used the C channel mounted on the topper. Trap slides in the C channel.
the part about building the awning is great... but the part that you use a hose piece instead of a fixed attachment is just genius... it removes all the stress .. and if/when it fails.. is a $2 dollar fix and back in business, you can even carry some extra in your tool box... Awesome.
Thank you!
Yeah, I was just about to say that he needs to submit a patent application for this immediately before CVT, Darche, Smittybuilt etc see this video. We had a 6’ CVT awning and that was my biggest complaint. The tension rods had no flexibility and allowed minimal adjustments. I was always afraid I was going to bend them. Then when the sun was low or in the rain you couldn’t adjust the awning low enough to block. This is pure genius.
I told him about it 🙂
Using the hose is genius! In fact, his entire design & build is genius! Having his daughter watch dad work…priceless! Great job Patrick!
I’m definitely going to add straps to the sides and tie downs at the corners! Y’all chill! 🤣🤣 I accidentally edited out the clip where I mention this.
People can be ridiculous
Until they can work a sewing machine the way that you do, they should stfu. Thanks for your help in the area of DIY
Gréât stuff i love watching you build this stuff, you inspire and I definitely want to make an awning like yours for my Mitsubishi L200 . Thanks for your videos keep making them.
I think that goes without saying. As creative as you were with the rest I doubt you would have forgotten that. Lol awesome build. Thanks.
I'm going to give it a good go like haha
1. Great Finished Product.
2. Thorough Step-by-Step Presentation.
3. Low Cost, With No Special Tools.
Excellent!
This is my exact criteria for all my videos.
Auto trimmer tip for you. When setting vinyl a longer stitch length is stronger than a shorter stitch length is. This additional vinyl (or leather) material between the needle holes prevents the seamline from becoming a perforated tear line under stress.
Wow good point
Your "build" was the first to be explained totally......have watched others for 2 years who denied all the measurements details....you were wonderful..thanks for sharing
You are welcome! Glad to help!
The problem with rooftop tents is getting dressed sitting down in the tent and you need somewhere to sit/prepare food etc. when the weather is bad. I have added zips to three sides of the awning and made three individual zip on sides to make a fully enclosed tent. The end section has a zipper door and the side pieces have mesh screen windows with a roll up canvas cover. Also added side panel to fit between the wheels to close the gap under the vehicle. A spare extendable pole placed in the center of the awning ensures good run off in heavy rain. Flipping the roof rack mounting brackets upwards will increase the head clearance. It is essential to have guy rope mountings to secure the awning in windy conditions . Pegging down the side panels makes the set up fully windproof.
You’re an absolute genius sir! I’ve took 95% inspiration form your post and my awning looks so professional, thank you so much for your inspiration
Shaun here in UK
Thank you for saying that! Great to hear that your project turned out well! 🙌🙌
hey we'd love to see it! make a video for us?
The cover you made was cherry on top!! Awesome
Thank you! 🙏
Thanks so much for these! Definitly going to make this. One thought. I always put a small fender washer under the head of the rivet when using it with fabric as it helps relieve the stress under the head.
Y
I have watched several of your videos. You are a natural teacher, making sure to explain all steps AND the reasons behind each step.
I'd love a video on how to build/ sew an enclosure that could attach to your awning.... with zip up windows and door. Lol..
I'm not asking for much 😂... I love your build and your daughter excitement and smile when sewing how handy sewing is! Daddy's amazing!
That was super clever with the heater hose.
Smart Choice using Heater Hose....Heavy duty and flexible
Phenomenal build and skillset young man! Multi-talented. Showing the materials (and what they're called) helped simplify it and makes the project not be overwhelming. I love the hose idea. I'll probably think of questions later. One thing I might also sew on along the sides of the fabric is velcro straps to snug up to the support poles. Thanks for re-teaching me how to install a zipper etc, etc, etc!
I am amazed at your talents. I couldn’t believe how many technics you used to create this amazing awning. You are a great teacher and this project is simply amazing! I couldn’t stop watching and wanted to learn more! I wish I could pay you to make me one!!!
Your ingenuity and her smile earned this like. Great tutorial. If I wasn't so lazy I would follow this walkthrough for my awning
Very cool Sir. I think I was most impressed with the vinyl cover. I’m new to sewing and I haven’t attempted sewing a zipper yet. Why us guys aren’t taught how to sew at an early age is a mystery to me. So many cool pieces of gear to make! 👍🏻
Girls are rarely taught to sew. People are too busy on their electronics:(
Love it that you want to sew. Take a look at the information about the stitch length. Wider stitch is better and stronger. As to not create a tear where vinyl is puched from the needle. I am a 61 lady now learned to sew and watched my dad and brother work on cars. I learned though by watching. Thus Jeep Wiz I put a new radiator, hoses, thermoostat, radio, head rests, missing screws, and other things recently to an 04 jeep. Remember you can walk through a vehicle scrap yard for things as well. You can remove interior items like the black hooks from jeeps and use them in camper builds. I also found roof racks cheap. I want to find a Subaru rack but have not yet. Sold my jeep.
Very nice. I would suggest double stitching the zipper to the vinyl. Also, why not have the zipper run around the corners? That way the cover would open completely up & get out of the way.
You are a genius with common man savings n ideas great job..
thank you!
No need to watch any other awning video. Simply the best!
The awning looks great! Coolest part of the video is seeing you share the experience with your kid.... thumbs up!
cool idea for using the fabric tape to hold the zipper... sure beats pinning it down.. Thanks for sharing
Yes it does! You are welcome!
My brother learned to sew in the Air Force when he was a parachute packer. He passed that on to me. Great skill to have. Great awning and great video! Can't wait to build mine...
You are a true craftsman! Great design and fabrication.
All you have to do is go to Academy and get some scotch guard. Tent spray and spray on it. But that canvas, and it'll be waterproof and Scott's guard of tent spray waterproof.
wow! i cant imagine the factory made brands working any easier, faster, or better! awesome!
I love the overall design and simplicity. I specially like the hose connection as it provides better durability against wind. If it gets blown up, the hose connector should provide enough flexibility.
Amazing, thank you.
Amazing work Patrick ....I love the way you describe each process in simple terms that even Dummies can understand. ... but the highlight of today's video is the live doll you're holding ... your daughter is sooooo cute.. God bless her 🥰🥰🥰
So I just saw your video on how to make the 270 tarp and I was thinking about making one myself and running through some ideas, but you nailed it. You completely solve the problem that rhino has with theirs that if the pole suddenly drops down from wind it’s gonna snap the hinges. Just started following you and I am looking forward to going through all of your videos.
I just love your assistant! They grow up so quickly
Great job mate, I'm going to give it ago for sure. I just wish you had sawn in 3 or 4 valcro strips along both side to keep it tight wish would omit the sag.
If you cut a notch on the “pushing rod” to add the button, you can correct for twist as you get close to the pole button hole.
brilliant!
I just drew a black line so that I knew when I was getting close and in alinement
Thank you. Impressed for sure. Also nice seeing you with your child while you were sewing. Outstanding! Will make one for my bug out. Be safe and enjoy camping.
What in the man of many talents just happened? Im shocked and very impressed, I was originally going to watch the other awning video but came here first. 1st class 👌🤙
Dude! That's sweet!! Nicely done sir!! 10/10
WOW, you did a really nice job on this awning, I'm thoroughly impressed with your ingenuity, great idea using the rubber hose and I have to add I'm jealous of your sewing skills...LOL.
For the zipper, if you sew the zipper on the face side with the teeth away from the edge first, then fold it and stitch it down you get a nice finished edge and a double stitch for more strength
Awesome idea!
THAT HOSE!!!!! MINDBLOWN!!! DEFINETLY BUILDING THIS! greetings from PANAMÁ!
Everything presented was amazing. Great job and thank you. 🛠🤘
Great work! I like that you had the little girl showing anyone can sew! I’ve been sewing since I was a toddler. Two pieces of advice. One, mount the awning the other way on lower cars to give about 4” more head room and two, since you know how to sew add a few Velcro straps to the sides of the duck cloth to strap to your side bars. 👍🏼
This video reminded me that I need to repair the end of the vertical poles for the similar awning on my pop up trailer. The year before Corona the bag for our awning was falling apart. So I bought some Sunderland fabric online and my upholstered friend made a new bag. Had to add web straps on the outside with clips to keep it from blowing around on the road. Velcro straps on the sides for wind flap would be good or there are plastic clips for the same available from Amazon. In my part of the world (Mojave Desert), tie downs are necessary on the outboard poles.
This is great, I particularly love that you showed sewing the case and how to put it on standard roof rack crossmembers on the Subaru. Makes me want to go buy a drill press and make one!
thank you! and a hand drill will do just fine I promise!!
Thanks for posting parts links, especially the spring clips. This opens up so many possibilities.
Excellent instruction and showing all the steps. TY!
Figured you'd enjoy knowing that I will be using this idea for my next work vehicle. You'll have made such a big difference in my quality of life come next summer. Thanks for the idea.
You could sew a 4 or 5" piece of velcro in a few places down both sides so you could wrap the velcro around your left and right support arms. That would keep the canvas tight in the wind and creat more support on all 4 sides.
Just a thought.
Awesome job! I have saved this and will watch it again when I go to make one for my truck!
Really cool project!
Great design and easy to follow build also very cheap to make .brilliant!
You gave an exceptionally creative mind. Great project build.
Thank you for sharing with us. I will try to do it on my Chevrolet Spin. I loved seeing your daughter's smile. 🇧🇷
THOROUGHLY ENJOYED THIS VIDEO. I WATCHED IT AT WORK WITHOUT SOUND! AMAZING CONCEPT THANKS MAN
Welcome! NOW GET BACK TO WORK!! 😂😂
@@PatrickRemington SHHHH DONT TELL MY BOSS. WERE SO SLOW TODAY. ANYWAYS GOOD VIDEO I CANT WAIT TO MAKE ONE!
😍amazing build, awesome skill set, love the Jax sticker, FoCo here 😍
🤩and who could not smile with that kiddo on your lap🤩
Thanks man!
I appreciated the awning bag! I was going to hire one made BUT not now. I will use your video and make my own. I've been hanging onto an old canvas awning and poles from a popup camper the I will now attach to my van luggage rack. Thank you ... bet there's NOTHING you can't do! Your absolutely amazing!! P.S. what a nice well equipped work shop.
Awesome DIY, I love the flexible hose joint, that is just a great idea!!
You might want to add 3-5 velcro straps to the awning along the edge to reduce sagging
You are truly a craftsman 👍👍
Man....that’s sweet. One of the best DIY awnings I’ve seen. I have an F-150 and no roof rack, I’m about to build your awning and the roof top tent and if my wife gets mad I’ll be sure to send her your way since you are 100% responsible for my new found obsession lol! No seriously man, this is off the charts kool!
Thank you! Keep it up!
Nice 👍 best DIY I seen. Gonna use this for my Square Drop Trailer Build. Thanks a bunch for sharing
Brother I Manufacture Awnings for a living you did A GREAT JOB ON THIS , HATS OFF TO YOU ! TAKE CARE OF THE LITTLE ONE SHE'S PRECIOUS ! I ALSO SUBSCRIBED TO YOUR CHANNEL !
Very slick design. I wish I see this video earlier before buy the awning
Wish you where my neighbor. Great job 👍
I wish you were my neighbor too. Mine are kinda lame. 😂
I’m going to use a retractable projector screen for my awning (hopefully it will work)
Had a few ideas for poles onto i seen this video 👍👍👍🇮🇪. Another cracking video.Thanks
Nice, you can let it hang to the ground and watch movies on it
I've had this idea for years. You ever get to it?
Awesome diy solution, very cool Patrick!
Thank You! You have given me some ideas, I have a 2010 transit connect I have been converting into a camper for some traveling. I added a hand held shower head to my 15 gallon water tank so I can take a "room temp" shower out back of the van, and a spot to stick the porta potty if I am camping there for a few days. Will add side walls and this way I can close the back doors of the van for security and still have this set up.
Very simple and easy, good work.
You are a legend! Amazing DIY and looks factory made
Thanks for taking the time to make this vid. Can't wait to build this.
You are welcome!
Thank you for this! I have actually built my own awning based on your design. ❤
Turned out great like the final outcome and detailed build. Thanks
This was awesome, you’re a brilliant guy👍👍👍👍
after getting drenched for a week on the coast this is what I will be building next! thank you!
Ok i watch to see diy projects but sticking in the smiling baby even got this cranky old man to smile so kudos u win :) great video as always
Haha thanks man!
Great video! How about a video for a shower tent that they call an “en-suite” that mounts to the rack.
That would be a cool project! I'll look into it!
@@PatrickRemington nice job on the build! I'd also love to see a shower tent build. I'm in the process of adding a second awning to the back side of an old coleman popup. I plan to put sides, and flaps to close in for privacy (shower, changing, bathroom, etc). Was struggling deciding on making my own hardware vs. buying pre-made parts. Your video I think was the inspiration I need to build my own. Thanks again! Hope to see a shower build
@@PatrickRemington check out shawnee hills workshop they have video on it.
great for compost toilet or standup dressing stahl with mirror. These are big concerns for standard hght vehicles at festivals requiring quick costume changes and bathroom breaks without spilling in the car.
That turned out so slick! Very well done.
my wife and I had the same idea, but it came out a little differently! very good!
Now you got my mind a thinking, great detailed build.
Mission accomplished 💪
I am highly impressed. There are some ideas you came up with that I wouldn’t have connected the dots on.
Amazing. Great video, great editing. Love everything. Yes. It is awesome. Love to see your daugther and your wife helping you.
yo bro you deserves a million views
Best one yet , great effort mate cheers
Good job man,congrats from Greece.
It might be worth sewing velcro loops to the side of the tarp to connect to the conduit. Maybe also add an extra bolt to either side of the far brace so you can use tie-downs if it gets a bit windy. Good build overall, I'm just going to buy one as I'm lazy.
Yeah definitely.. I thought I had mentioned that I was going to do that in the vid but it must have gotten cut out
@@PatrickRemington to be frank you may well have, i'm not the sharpest tool in the box :D
This is fantastic! Thank you for sharing this. Your baby is adorable 💛
Thank you!! 😊
I'd like to make it just like that, thanks for the video it really helps a lot. I just noticed that the height of the installation is a little bit lower there is a probleb in closing and opening the door of the car. All in all its the best DIY I've seen..❤
Well done mate, I’ve just folded my old awning in two around a tree so this great video will breath new life into what just looked like rubbish yesterday. Thank heaps.
I learned so much from your video! Thank you!
I'd like to see you tackle a Batwing Awning!
DO IT. Bacardi and Cola, do it do it.
Heads up. You win. He done it. See new video from him.
Fantastic!! Thank you very much for sharing your design!
Did the same thing, in order to strengthen the poles at the hinges, I put in a broomstick and drilled it through.
Hi Patrick, super job on the awning. A real alternative if you've got the skills and the gear. Small point...Alum and stainless don't really like each other but it's an awning so no worry. I sometimes use the steel 'nail' from the pop rivets if i'm short of panel pins for woodworking, and i sometimes use the aluminum parts as solid rivets so i don't get the 'lump' on the back. I think your little apprentice has a bright future! Thanks for sharing Patrick. Stay safe and keep up the good work. 👍🖖😎🐶🦴😺🚙🌈
Brilliant use of easy to find items.... Thank you.
Welcome!
Excellent awning and the cover looks sharp!
Greetings from Mexico, this weekend the project started
I thought I would tell you that I started building one a few months back after I got just to the point of getting the material for it. I got a offer to buy a 6×8 awning for $107 including S&H so still a win. Now I'll just have to convert the one I was building to a 270° awning for the other side.
Great job! Thanks many times over.
Awesome build the only thing I'd add would be some velcro straps to the sides to attach to the side poles to stop the droop. 👍👍
What a sweetie you had as your boss.I hope she can show you how it is opens and closes.lol. good work.
Awesome canopy! Couple ideas... Snap straps where the middle is drooping. You can use rivits in the wood plug instead of screws. The roll straps, attach them to the brackets that attach to the roof rack so they don't come loose, a fender washer might be good to add strength to the straps. Add hoops to the end so you could tie it to another person's roof rack, a tree, or the ground for rough weather/wind. The keyholed brackets use those same spring clips to lock it in rather than bolts or with the bolts for easier connection. I LOVE YOUR VIDEOS, they get me thinking, you have great ideas! Thanks!
Thanks for the recommendations! Working on a 270 awning now!
Best DIY awning yet!
Hi great project, if you sewed some Velcro tabs along the sides of the material you could then strap it to the side poles once it was all deployed to stop it flapping in the wind. Joe
Thanks! Yep! Definitely going to do that. I accidentally edited out where I said I was going to do that.
Awesome. Added rivit gun and sewing machine to the list of tools needed
Every man needs to know how to sew.