Great video presentation. I've had a Digitrax system for years bet had layouts in various operating conditions. I knew just enough to make a train move and little else. This has really made me feel more confident with my system. Many thanks!
Excellent presentation. I use Digitrax at home and NCE at the club. The programing of the soft key in the NCE throttle is something I did not know so I thank you for the tip.
Brilliant! I have an MRC system and this video for programming my engine was invaluable! I was in a CV haze before, I'm not now. Thank you so very much.
GG 👀, I agree with Mr. Moises- Excellent presentation my friend, you really know your shhhhhhtuff. (grin). Thank you for taking time to produce these helpful webinars and video tutorials. Very helpful. Keep up the great work! Hey let's see another one of your weathering/light modeling jobs on a different engine you've done. (I know put you on the spot right). Thanx Thom...
Im pressing the FUNC key and the 1 key at the same time to reach different sounds but every time I try the bell comes on. Do you know what I am doing wrong?
Is DigiTrax New DCS52 a problem programming SoundTraxx DCC? It is NMRA approved. If Not... Should I sell it on ebay and invest into something else for SoundTraxx DCC CV programming. Note: I have done some DCC CV Programming on Digitrax DCS52 but nothing advanced. Please advise... Thank You.
The DCS52 apparently does have issues programming CVs above 257, as do prior generations of the DCS50 and 51, If you contact Digitrax, they say to ask us, but the decoder cannot respond to ‘user intent’, the decoder needs a DCC command to change these CVs. Until they fix the firmware, there are limitations. Now, I have also heard form a 3rd party user that they were experimenting with an update that would allow this, but I cannot comment as to its availability to the user.. yet. I hope this helps. Thank you!
Question: I have a Blinking red LED I wan to install in a caboose, but it will not work on DCC track voltage. I works perfectly on a 9v battery. A non-blinking LED will work very nicely from DCC track voltage . What can I do to fix this??
I have the digital controller from ROCO (Rocomultimaus). But with this control, I am unable to access the engine on and off of my Atheran Genesis SD 90 H phase II locomotive, with Tsunami II decoder. What is the command I give to turn the sound on and off? (It is not the mute function) I want to know how to turn the engine of the locomotive on and off, as in normal normal operation. I write here from Brazil (Brazil) Thanks !
Hello, We are not familiar with all command stations, but F27 would shut it down and F26 would start it up. Im not sure if you can access functions that high with this system. Im also not sure if you can access the CVs needed to do function mapping with this system. You will need to contact your command station manufacturer for that info.
@@SoundtraxxDCC Good Morning ! It was exactly this information that I needed to know, that the F 26 turns on the sound of the machine and the F 27 turns off the sound of the locomotive. I have enough European train. But I also have several North American trains, some of them Atheran and Atheran Genesis and it is precisely the Tsunami / Tsunami II decoder that has these very high on / off vestments. The rest, no! Thank you very much for helping me. I will buy a controller that I have access to 28 functions. See you...
Is there different cab chatter for the 4014 big boy (150th Annaversary Promontory edit?) I have a diesel chatter ( i.e Amtrack) on my BigBoy I'm getting really disappointed if that's what I got with my BigBoy and can't change it. Any ideas HELP PLEASE 🥺
Cab chatter is the same on all Tsunami2 decoders, so yes, this is also what you’ll hear on the Big Steam. I turn the volume down so that the sound of cab chatter is there, but not strong enough to be heard clearly. This was not specified by Athearn to change. You can contact our product specialist to discuss any disappointment. We do want to make sure you are happy and maybe we can help you find the settings you need to help make the experience better. support@soundtraxx.com
@@SoundtraxxDCC First of all I'd like to apologize I did not mean disappointed it was more of a surprise then anything I love the cab chatter it's supper cool along with all the other functions. Thank you all. Clayton.
Thanks George for including MRC in your presentation. I have been using MRC for a long time and still learned something in how to 'read' CV's.
I am glad this helped you!
I am glad this helped you!
Great video presentation. I've had a Digitrax system for years bet had layouts in various operating conditions. I knew just enough to make a train move and little else. This has really made me feel more confident with my system. Many thanks!
Excellent presentation. I use Digitrax at home and NCE at the club. The programing of the soft key in the NCE throttle is something I did not know so I thank you for the tip.
Brilliant! I have an MRC system and this video for programming my engine was invaluable! I was in a CV haze before, I'm not now. Thank you so very much.
We are glad this helped!
GG 👀,
I agree with Mr. Moises- Excellent presentation my friend, you really know your shhhhhhtuff. (grin). Thank you for taking time to produce these helpful webinars and video tutorials. Very helpful. Keep up the great work! Hey let's see another one of your weathering/light modeling jobs on a different engine you've done. (I know put you on the spot right). Thanx Thom...
Outstanding video! Thank you as that was a lot of help : )
Thank you!
Thank you very much. Excellent!
Thank you for another great video tutorial. Come over and help me speed match my locos anytime. I'll feed you!
haha thanks
Im pressing the FUNC key and the 1 key at the same time to reach different sounds but every time I try the bell comes on. Do you know what I am doing wrong?
Contact our Support Team for help with this: (970)259-0690 ext.22 or support@soundtraxx.com
Is DigiTrax New DCS52 a problem programming SoundTraxx DCC? It is NMRA approved. If Not... Should I sell it on ebay and invest into something else for SoundTraxx DCC CV programming.
Note: I have done some DCC CV Programming on Digitrax DCS52 but nothing advanced.
Please advise... Thank You.
The DCS52 apparently does have issues programming CVs above 257, as do prior generations of the DCS50 and 51, If you contact Digitrax, they say to ask us, but the decoder cannot respond to ‘user intent’, the decoder needs a DCC command to change these CVs. Until they fix the firmware, there are limitations. Now, I have also heard form a 3rd party user that they were experimenting with an update that would allow this, but I cannot comment as to its availability to the user.. yet. I hope this helps. Thank you!
Question: I have a Blinking red LED I wan to install in a caboose, but it will not work on DCC track voltage. I works perfectly on a 9v battery. A non-blinking LED will work very nicely from DCC track voltage . What can I do to fix this??
Contact our support department for assistance with this: (970)317-3505 or support@soundtraxx.com
I have the digital controller from ROCO (Rocomultimaus). But with this control, I am unable to access the engine on and off of my Atheran Genesis SD 90 H phase II locomotive, with Tsunami II decoder. What is the command I give to turn the sound on and off? (It is not the mute function) I want to know how to turn the engine of the locomotive on and off, as in normal normal operation. I write here from Brazil (Brazil) Thanks !
Hello,
We are not familiar with all command stations, but F27 would shut it down and F26 would start it up. Im not sure if you can access functions that high with this system. Im also not sure if you can access the CVs needed to do function mapping with this system. You will need to contact your command station manufacturer for that info.
@@SoundtraxxDCC Good Morning ! It was exactly this information that I needed to know, that the F 26 turns on the sound of the machine and the F 27 turns off the sound of the locomotive. I have enough European train. But I also have several North American trains, some of them Atheran and Atheran Genesis and it is precisely the Tsunami / Tsunami II decoder that has these very high on / off vestments. The rest, no! Thank you very much for helping me. I will buy a controller that I have access to 28 functions. See you...
@@carlosmagno1112 Ok perfect, let us know if you need anything else!
Is there different cab chatter for the 4014 big boy (150th Annaversary Promontory edit?) I have a diesel chatter ( i.e Amtrack) on my BigBoy
I'm getting really disappointed if that's what I got with my BigBoy and can't change it.
Any ideas HELP PLEASE 🥺
Cab chatter is the same on all Tsunami2 decoders, so yes, this is also what you’ll hear on the Big Steam. I turn the volume down so that the sound of cab chatter is there, but not strong enough to be heard clearly. This was not specified by Athearn to change. You can contact our product specialist to discuss any disappointment. We do want to make sure you are happy and maybe we can help you find the settings you need to help make the experience better. support@soundtraxx.com
@@SoundtraxxDCC
First of all I'd like to apologize I did not mean disappointed it was more of a surprise then anything I love the cab chatter it's supper cool along with all the other functions. Thank you all.
Clayton.
@@claytons8263 Thanks for the clarification :D
ESU
Excellent, thank you very much.
Thanks for watching
Awesome thanks for the great video
Thanks for watching!