Montero Sport Gen 3 EGR & Intake Manifold Removal | Triton | 4N15 | Mitsubishi | DIY
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Here's a quick D.I.Y. guide on how to remove your 4N15 EGR and intake manifold. We recommend cleaning the EGR valve and intake manifold every 60,000km. Hope you like this video guys. Please support our channel by hitting the like and subscribe button. Thanks!
Follow us on Instagram @ / btdgarage
Awesome video very easy to follow. I completed my own DIY intake clean over a couple of days. Would be excellent to see a valve adjustment DIY guide as well if you have the time :)
Thanks! I'll try to if I get a chance :)
Thanks lods nakaroon ako ng idea pano proseso sa pagreremove nga mga piyesa
Awesome video, so please post the new hilux or fortuner engine if you have as well. Thanks
I EVEN LIKE THE MUSIC !
Ay makes me wanna get the job done
Absolutely agree with that this video is the best on the net. Perfect light, subtitles, details highlighting. Wish you made the video revealing crankcase gases valve diagnosing and cleaning
Ay grabe...katakot mag diy nyan, masyado palang mabusisi sir...
aftr ko mag pa cleaning ng egr throttle bodt nag check engine after a month
hi po, very educational!, mga ilang mileage on the average po bago mag linis ng EGR at Intake Manifold? Salamat
Hi! We recommend to do it every 60K km :) Thanks
Usually po ba kailan, kailangan ipalinis ung EGR po ng Monty, or ng anong sasakyan in general po?? Salamat
Я даже не предполагал, что там столько надо разобрать, чтоб впуск снять. Интересно, когда глушат егр так же надо разобрать?
🎉
Hi guys how’s it going, would you by any chance have any experience with changing the cylinder head on a 4N15 in a triton with out having to take the motor out ?? Any info would be amazing cheers
Boss magkano cleaning ng egr manifold intake montero sport 2016?
sir, kung mamimili lang between occ at egr blanking to reduce the soot buildup, which is better?
Bakit po low power yung ganyan na model?
How many kilometres is it.?
Sir tuwing kelan pinapalitang ang spark plug ng Montero Sport gen 3?
Hi! Wala pong spark plugs ang diesel engines :)
sir magkano po pa change oil and check up sa inyo, tandang sora lang kami eh, montero 2016 4n15? Also, what's the cheapest oil viscosity/rating na okay sa montero? masyadong thin yung recommended ng factory na 5w30 cj3, ang init dito tapos city driving.
Kindly message us on our FB page po @bertsturbodiesel thanks!
жуть как сложно, теперь попробуй собери обратно )))
where is your shop? how much for cleaning the EGR?
Sir location ng shop po ninyo?
Effective ba Yung liqui-moly spray in egr-cleaning sa strada2022, open and spray lang sa throttle valve then high Rev?
Haven’t tried yet po
@@btdgarage ito na po ini-offer ng casa in cleaning egr , para iwas Baklas..bale during spray masasama sa combustion ang liqui-moly then pupunta sa exhaust. pero as what I know sarado ang egr during high Rev,paano papasok sa egr ang liqui-moly pabalik from exhaust? Tama po ba ?
@@davepamplona5491kaya pala nagtataka ako yung mga markings hindi nagalaw ganyan na pala ginagawa ng casa
Good day, sir pa tulong nman ang montero sports ko 2016 model 4n15 makina bigla umosok ng maitim tapos parang kinakapos ang hatak Dila nmin sa shop. Pinalit an ng fuel filter at air filter sinubukan nmin OK namn siya kinabukasan bumalik at sa panahon 20kph nalang tapos parang mamatay umiingay engine parang palyado at super itim ng usok.sana matulongan nyo ako sir. Salamat
Good day, pls message us directly on our facebook page @ facebook.com/bertsturbodiesel
Ano po symptoms bat kinalas? Thanks
Boss sunod na scv cleaning ng monty gen 3
Great video. 2 hour strip, 2 hour clean, 2 hour install.. Thank you very much.
It took me 2 days... Hard to dismount egr, extremly hard to clean the oily soot shroud in manifold. Its absolutely resistant to petrol, only carbcleaner can deal with it. I used 4 ballons to clean the dirt.
Sir hingi po ng advise unit ko po Montero 2018 kumakalas sa 3rd gear pg nasa 2500rpm na pataas, baka po aware kayo, salamat
Hi, most probably 3rd gear synchronizer. Medyo sakit po ng gen3 monty and strada
@@btdgarage ganon po ba, mga nasa magkano po kaya sir
Sir off topic but somewhat similar din. OIL CATCH CAN, ano po ang mga cons if any? When i cleaned my throttle body there was a significant volume of oil. I assume it came from the xylinder head breather then passed thru the VGT to the intercooler? Makakatulong po ba ang oil catch can?
Sir ilan litters po ba ang engine oil ng montero sports diesel model 2019 Gen3 manual yung taman sukat po sir salamat po.
yung blow-off valve nya ? pano linisan ?
please reply
Awesome video... Would you have a video of cleaning the intercooler
I'll try to. Thanks!
th-cam.com/video/MhMz0egUHh0/w-d-xo.html
Hola buenas noches.
Gracias por compartir con nosotros.
En donde está unicada la valvula pcv en este motor?
Had mine done DIY. Thanks for the tutorial. But i am having issues with my fuel rail supply pipe. Its always leaking fuel. Had removed and reconnected it twice already. Got any ideas?
Hi Paulo! If it keeps on leaking it’s best to replace it. Just make sure not to over tighten those pipes upon installation.
@@btdgarage managed to do it on the 4rth attempt. Slamat po ng madami sa mga DIY tutorials nyo sir! More power!
sana meronn kau vid paano tangalin un sa 2014 montero manifold linis egr
Are these engines any good or shitty like the 4d56?
Hindi ko kaya baka hindi ko na maibalik ng maayos lahat o baka may kulang na pagbalik ng mga pyesa at wirings.😫
You can do it! :)
Sir, loc ng shop ninyo? Baka pwede ako magpagawa sa inyo.
Hello. Got some question here. Last day on 13 January 2022 I've got my 60k km service at Service centre. Everything seems done correctly. Then I'd have a long drive on 14 January 2022 when I notice there's something weird about my engine sound when I press the throttle and like loss a bit of power. Then later on after 12 hour park, I'll check the engine oil dipstick level, it goes half between max level and the x mark. Then I'll check it again immediately after turned on the engine a while, dipstick level goes about 0.5mm over the max level. Will it cause any damage to my car engine? I already drive for about 200km before realize the overfilling oil engine from the service Centre. Thank you..
Hi. 0.5mm over isn’t that bad. However, regarding loss of power it’s best to bring your unit back in the service center to have it rechecked if there’s a noticeable loss in performance. Most of the time on modern diesels, a simple issue like a loose intercooler hose clamp / boost leak can cause a significant loss of power. Have every part they removed/serviced rechecked and retightened.
@@btdgarage when I checked back last Pic I've taken, it's more like 1.5cm +/- from max.. But already sorted out. Drained the excesses oil the other day, engine running smoothly already.. Hope didn't cause any damage..
@@btdgarage I think the loss of power is related to the excess oil because the crankshaft get some resistance when the oil reaching the crankshaft..
When I checked again, the overfill is about the same level as from 'min' to 'max'..
Watched this over and over again, but I am still intimidated by the process. Been thinking about doing it by myself or rather "destroy it yourself". I might just let someone else do the the job, but I don't know what shop in my area I could trust.
Where is your shop based?
Hi Stephen, we’re in Q.C. Phil.
kaya yan pero dpat may spare car ka para kung sakali may magagamit ka hahaha tsaka dpat organize ka para hindi ka mwla sa mga tinatanggal na bolt.
Of course. Every mechanic is doing a DIY.
Bos, need pa ba mag bleed ng coolant after the job?
Thank you very much for sharing. would you have a video or know of one that shows valve clearance adjustment on this engine?
No video yet but I’ll try to make one soon :)
Here’s the standard value for 4N15 valve clearance:
(Cold engine) Inlet valve: 0.08 ± 0.03 mm
Exhaust valve: 0.16 ± 0.03 mm
@@btdgarage That would be great if possible. I know several owners of Tritons and Paj/Mont Sport with 4N15 engines who'd like to do it properly, themselves. What I'm often confused with is gaining access to the adjusters, since there are so many parts in the way.
Ilang odo nito boss. Nice video
are there repair pistons and rings on these motors? does the thickness of the sleeves allow boring and can they be replaced?
Pare anung year yan Montero?
Nice one thanks
boss kailangan pabang i fuel bleed ung fuel line na tinanggal galing sa common rail?
No need na po. But if you want to be sure, loosen the upper end of the removed fitting (1 full turn), unplug all injector electrical sockets, then crank the engine, air bubbles will come out sa fitting. Don’t exceed 10secs when cranking. Once there’s no more bubbles or air coming out of the fitting, tighten it. Reconnect the injector sockets then start the engine. If you get a check engine light after this, it’s due to the injectors unplugged while cranking, so best to have an OBD scanner ready when doing this to clear the code.
Excelente!!
Would a catch can stopped or even slowed the clogging process of the EGR?
Not really since the EGR system connects straight from the exhaust and to the intake manifold. Catch cans goes in between the pcv/breather hose and intake hose
Excellent video!!!
Thank you :)
Katakot mag diy dami pang wires na huhugutin baka mali ang pagkabalik..magkano ba kaya kadalasan singil pag nagpalinis nyan?
4d56 lng sakamam hehe msyafo ng magulo to sir hehehehe
@@johnpauloaboc878 oo pati yung 2kd ng toyota madali lang maglinis egr at manifold, konti lang wires nun sa may injectors lang tapos konting sensors taposnmga vacuum hose..malalaman mo pag binalik.
Nakakatakot kalikutin pag hindi sayo ang sasakyan hehe
Sir posibilad ba after pagawa mg gnyan maglleak? Like di nahigpitan
If not torqued to spec yes po
Katakot pala huhu
Wow, that manifold wasn't very dirty. It didn't look like it needed a clean at all.
Put a ProVent 200 on it and you won't be as bad
Awesome