ok lets check a few things. 1) you install the perodua smart link app from appstore already right ? 2) you're able to connect and share screen using the perodua smart link app correct ? 3) what happens to your screen when you handbrake down?
If it stops at first bar then it could be cable issue. You can do a test. If you plug your phone to your computer/smart tv USB port using this cable does it work ?
Hi sir, I have been follow all step from ur way, but i still unable to connect the smart link, could you give me a help? Thanks if you do reply. phone model - huawei p20 pro perodua bezza
Huawei models seem to face USB debugging problems with Aruz. Other ppl shared vid on FB cannot get past 1st bar during connection attempts. Is yours also the same ? Can you also do a test pls ? In developer mode, try to enable 1) Allow ADB debugging in charge only mode 2) Always prompt when connecting to USB 3) Verify apps over USB Try to connect again and see if your Aruz player try to force install "Easy Connect" and "Drive Mode" to your phone. Also just to isolate problem with your cable can you test to connect your phone to TV/Laptop/Desktop using the same cable and play music/do file access ? it should be a direct plug n play without needing to do anything.
@@treasurehuntermy1916 Yes sir, i have been tried to allow ADB debugging in charge only mode, always prompt when connecting to USB and verify apps over USB, and keep blocking the drive mode, but the "start now" do not pop out =( what else can i do sir?
Seems like majority with problems really are Huawei models. hmm. Can you do a test pls ? In developer mode, try to enable 1) Allow ADB debugging in charge only mode 2) Always prompt when connecting to USB 3) Verify apps over USB If somehow when changing ADB it asks to choose between picture transfer , file transfer and charge only, choose file transfer. Try to connect again and see if your Aruz player try to force install "Easy Connect" and "Drive Mode" to your phone.
What Perodua model are you using ? Tbh drive mode is a nuisance because it will always try to take center stage. If it doesn't show up ( like in Myvi) and you can connect straight to Perodua smart link then all the better...but if drive mode keep popping up then just install it like I showed in the 2nd vid. So far the 2nd vid is the most stable way.
@@FirdausMazlanI'm assuming you seen my first vid where I enabled usb debugging already as a pre - requirement. Let's try this first. Don't launch perodua smart link. Just plug in your phone cable to the usb port. What do you see ? If drive mode don't show up means you're not connecting at all. Could be problem with cable. Cable can charge your phone doesn't mean it is compatible for screen casting. Btw what phone model are you using ?
I success connect it honor 8 pro which is latest Android 9,honor view 10 android 10 failed
Hi bro I’m using Samsung s6 edge my perodua myvi went i connect smart link can use once I release handbreak cant any advice on this
ok lets check a few things.
1) you install the perodua smart link app from appstore already right ?
2) you're able to connect and share screen using the perodua smart link app correct ?
3) what happens to your screen when you handbrake down?
Detect phone, it only can run as first petak only n stop, am i miss something to settings?
If it stops at first bar then it could be cable issue. You can do a test. If you plug your phone to your computer/smart tv USB port using this cable does it work ?
@@treasurehuntermy1916 ok, i try
Hi sir, I have been follow all step from ur way, but i still unable to connect the smart link, could you give me a help?
Thanks if you do reply.
phone model - huawei p20 pro
perodua bezza
Huawei models seem to face USB debugging problems with Aruz. Other ppl shared vid on FB cannot get past 1st bar during connection attempts. Is yours also the same ?
Can you also do a test pls ? In developer mode, try to enable
1) Allow ADB debugging in charge only mode
2) Always prompt when connecting to USB
3) Verify apps over USB
Try to connect again and see if your Aruz player try to force install "Easy Connect" and "Drive Mode" to your phone.
Also just to isolate problem with your cable can you test to connect your phone to TV/Laptop/Desktop using the same cable and play music/do file access ? it should be a direct plug n play without needing to do anything.
@@treasurehuntermy1916 i try on my phone P20 Pro also, but the usb debugging keep Off when i go to home screen..
@@treasurehuntermy1916 Yes sir, i have been tried to allow ADB debugging in charge only mode, always prompt when connecting to USB and verify apps over USB, and keep blocking the drive mode, but the "start now" do not pop out =( what else can i do sir?
Sir.. Can u try with huawei nova 7 se... I tried many time... But didn't get it
Seems like majority with problems really are Huawei models. hmm.
Can you do a test pls ? In developer mode, try to enable
1) Allow ADB debugging in charge only mode
2) Always prompt when connecting to USB
3) Verify apps over USB
If somehow when changing ADB it asks to choose between picture transfer , file transfer and charge only, choose file transfer.
Try to connect again and see if your Aruz player try to force install "Easy Connect" and "Drive Mode" to your phone.
Bro, why i dont have those drive mode notification, the one that you cancel. Do i need to install anything else other than perodua smartlink?
What Perodua model are you using ? Tbh drive mode is a nuisance because it will always try to take center stage. If it doesn't show up ( like in Myvi) and you can connect straight to Perodua smart link then all the better...but if drive mode keep popping up then just install it like I showed in the 2nd vid. So far the 2nd vid is the most stable way.
@@treasurehuntermy1916 aruz bro. so frustrating i still cant connect. thx for reply
@@FirdausMazlanI'm assuming you seen my first vid where I enabled usb debugging already as a pre - requirement.
Let's try this first. Don't launch perodua smart link. Just plug in your phone cable to the usb port. What do you see ? If drive mode don't show up means you're not connecting at all. Could be problem with cable. Cable can charge your phone doesn't mean it is compatible for screen casting. Btw what phone model are you using ?
My myvi cant connect with my redminote 9 pro, android 10, switch on usb debugging ready, stil cant connect