EP42 - 2H Motor install into the FJ40, The BIG clean up plus Remove broken studs bolts.
ฝัง
- เผยแพร่เมื่อ 7 ต.ค. 2024
- One step closer, as Jack and I installed the heart of the beast back onto the Chassis and spent way to much time cleaning and painting, the problem was once I started cleaning and painting one part of the motor, it made other parts look worst so I have to clean and paint them too, As well as using Tool Kings Polishing discs and Polishing BUFFING Wheel to make the tappet cover shine, did I over do it on for a 2H diesel?
Installed new engine mounts and found a number of broken exhaust manifold stud bolts that had to be removed, as well as damaged gaskets that needed replacing, and a long the way I ended up damaging one of the fuel pipes🤔
So now the FJ40 has a 2H, does that make it a HJ40?
Find Polishing discs and Polishing BUFFING Wheel @ www.toolking.c...
Heat shrink over the lines is such a good idea! Definitely stealing that one, Cheers mate!
I glad it helped you out.
Thanks for the support.
It’s nice to see you and your children working together. Those will be memories
Yes nothing better then building memories with family!
Nice work, always best to do it right even if it sometimes is a pain
That Milhouse moment. Another Fj40 with a 2H?! I thought I was the only one! Love it mate. Keep it up.
*Looking Good!!!*
_Always nice when Broken Studs Come out so Easy!!_
Yep I was very happy they came out as Easy as they did, I have been down the road of having very stubborn broken bolts and end up having to drill and tap the entire thing out, stoked I didn't have to go down that road this time, I was spraying them with WD40 every time I walk past over that week. Paid off!
You are doing a fantastic job! I can't wait to see the finished product!!!
Nice work mate.. you did the 2H proud, a superb motor. You're going to have to take the injector lines back off again to fit the clamps at various points to support them.. they are super important. If you cant find the injector line you need, let me know I have some spares.
Thanks you Duncan, Yes as soon as my boy finished putting them on, that was the first thing he said too.🤣 Thanks for the offer too, buying one off Mr Landcruiser.
Ahhh I notice you have used the same music as I use for my video intro. Great choice.!
Great to see your kids getting involved. I know no one likes the safety police. I say teach them young. Bare feet anywhere in a workshop is out.
I’m an old bugger with 10 toes and have my boots to thank for it. I always wear steel caps. I know this is an old video.
Lots of great tips!
(So not overkill)
Dave
Thanks Davo, Yes you are right safety should be first! , I spend my whole working day in Steel cap boots, but when I'm home sometimes I find it nice to be free of shoes.
had a quick look at your channel, some great tips on there mate. Keep it up!
@@40ChannelCruiser
Thanks for taking a peek at my videos. It’s really hard to stay positive when I usually get around 20 or so views each.
I’ve had a couple go into the thousands. It comes down to what TH-cam recommends to people.
I have some catching up to do to see more of your video work.
I’m impressed by your ability to strip what seems like every nut and bolt and then put it back together again.
I think many people underestimate this skill. Well done.
Looks great jayson, its coming together nicely
Looking good. I like the 40 series blue.
You got lucky with the broken bolts... came out like butter.
Keep up the good work.
That looks amazing buddy! I love the color
The engine looks great good job!
Coming along great, nice to see your kids involved with the rebuild. Wish we had diesel cruisers in the states. I think you’re going to beat your mate in California to the finish line.
Yes it's great to have the kids helping out. With so much to do I think the body work will be what slows me down, in the unofficial race to the finish line😂🏁
love the video. Very cool you have your kids out there with you. I live in the DFW area TX and guys around here seem to prefer the gas engines, I like diesels myself so no....not overkill. Tried and true. Thinking of starting a project myself.
Very cool! Keep me up dated when you started your project!
Looks bloody sweet mate
Really hard job and equipment you have is perfect good luck 👍
Really love this build.
fantastic channel! learned a lot, recently became a proud FJ45 owner, love it :)
Amazing job !!
Absolutely nothing wrong with a good old 2H diesel!
Yannis
I wish I had one for my Fj 40. I’ve been looking hard to buy one
@@donnareed3822 If you're in Australia there should be plenty floating around, they were found in 40, 60, 70 series, Toyota Coaster's and Toyota Dyna's, try asking around in the 40 series groups on Facebook :)
I live in Washington state on the west coast. We did get diesel rigs here. So we either have to get the from Costa Rica or Belgian. There are a few in Canada. How much would one cost where your at
@@donnareed3822 I just had a quick search and saw one for $2200 AUD including warranty from shop, but if you look around over here I'm sure you could easily pick one up for $500-$1000.
I have also 2H,engine ,HJ60LG-MW,under repair
Another awesome episode, keep them coming. PS I never have much luck using eazyouts. Lol
Yep 3 out of 3, I though that at less one of them would have given me some grief! WD40 over the week paid off!
Great video
Great job!!! cheers from chile
hi were you able to get a paint code for the blue? Cheers
nearly up to this stage with my 2H what paint did you use for the block ? and what prep before putting it on besides a degrease ?
Hey mate what disk and polish did you use on the tappet cover. cheers
Hey Jason , mate are the engine mounts the same position for fj45 and hj47? Or are they different ?
Same position, no change to engine mounts or chassis
Where is the new OEM thermostat? 😉
Did you zinc re-plate or paint your fuel lines?
Torque del motor
Hello buddy ,
i have fj45 pickup with oem 2f engine 4 speed transmision , and i want to swap the engine to 2h or any diesel engine
can you advice me about what should i do like what is the gear box that i need to install the 2h and what's the parts that i will need
and if there another option for diesel engines
please help me
regards
Buenos días saludo desde Panama que medida debe llevar las valvulas de admision y escape para ese motor 2H
Who rebuild the 2h for you?
Hi mate, didn't need a rebuild. Just a big clean up and a couple on new gaskets. Time and Money on the motor at a later date.... Maybe a rebuild withTurbo down the track🤷♂️
@@40ChannelCruiser
Whistle n soot kit, yew
Hi Jayson, I came back to this episode after 3 years.. I remembered looking forward to these episodes during lockdown.
Which brings me to the present.
What was the process for cleaning and painting the fuel lines?
Used a small wire wheel in a drill and carefully cleaned (Don'tuse a wire wheel on grider, found out the hard way), making sure the ends are taped off so nothing gets in the tube. Then clean down with wax and grease remover, etch primer then paint colour of Choice.
Once dry, blow out with compressed air tube to ensure they are clear.
@@40ChannelCruiser thank you