Ryan Bates I went to your site and I'm trying to buy one but I can't Find the "add to cart" button... How much is each kit? Also if I bought two, can I connect the other one via USB to the one with the pie to use as another controllers so it. Can be two players?
Ryan Bates awesome! So how would I use both fightsticks if they both have RP3s in them? That's where I'm confused, how would I use one as just a standalone course controller/fightstick?
Oh, you meant with TWO Pis and TWO fightsticks. Easiest way: The 2nd fightstick (slave) would have to contain a keyboard encoder with a USB plug going into it's Pi, When you want a two player setup just unplug USB connection from slave fight stick and plug into master. Better to go about it a more traditional Slave/Master route. One FSv3 has a RPI, the other is just a vanillia USB joystick like this: www.retrobuiltgames.com/porta-pi-arcade-help/2-player/
I had an idea for making a "universal" arcade stick/controller. Probalby mroe trouble than it's worth but I was going to buy one of those gamestop-branded DDR pads with the PS2/GC/xbox connectors coming out - they seem to be common at thrift stores - and wire up the buttons in place of all those dance pad surface buttons (could probably use old guitar hero things as well). Probably easier just to use a specialty encoder/arduino for a such a thing. I mean if soldering would be involved anyway.
If you find a DDR pad that has more than the O and X buttons I'd like to know what brand. Konami brands only have up, down, left, right, Start, Select, X, O- which limits the usefulness of a fightstick...
I don't know if this link will paste/stay or not, but here's a four button/directions/start/select for ps2 and gamecube: www.amazon.com/Gamestop-Game-Cube-Dual-Platform-Dance/dp/B0002SZN98 [amazon: *Gamestop PS2 / Game Cube Dual Platform Dance Pad*]. not sure that's enough for stick or not but more than the two anyway.
Hey! great video, love the artwork... Good and thorough explanation. However, did you skip the part of not programming the Pi for the GPIO pins, or is it not necessary? I appreciate your answer. Keep building great projects,again thank you
+Allan Valente Sure. See the 2nd to last page of this manual I made. www.retrobuiltgames.com/app/download/7118702641/Fight+Stick+Assembly+Manual+v1.0.pdf
Awesome creations, I think you're PlayStation one joystick would have looked better if the entire thing was silver just like your red Neo Geo one how the sides are red to match the top but great job I wish I could make those myself just like you!
really good job. I'm looking to make a project that uses similar buttons to the arcade buttons you used. (pi mp3 player with simple navigation buttons) Any information you can provide about those? Generally the entire process of wiring hardware is confusing me a lot, I've spent so many hours looking at videos but not sure that I'm going about this properly. Any resources on learning about wiring you could reccomend? Using a breadboard vs not is confusing, why some wiring projects requires soldering and some don't (i know has something to do with the connectors - but are those specific to the hardware or can you make any wires connect without solder if you have the right wire type / conncetors?) Anyway just hoping for some tips. Nice video hope you're enjoying your arcade controller.
Awesome vids Ryan. Hey do you know when you will providing more of the DIY arcade fight sticks (shell). Was trying to purchase one from you but said you are sold out. Thanks!
I went to your site and I'm trying to buy one but I can't Find the "add to cart" button... How much is each kit? Also if I bought two, can I connect the other one via USB to the one with the pie to use as another controllers so it. Can be two players?
6:06-Will I be able to build it with the full kit if I have no expirience in this kind of stuff? and will I have to do 5:17 or will it be included in the kit finished?
+NinjaRed5000 Sanwa JLF joystick. buttons are suzo Happ. They use E-Switch Snap Switch microswitches, that require 50 grams of force to activate. na.suzohapp.com/products/pushbuttons/58-9100-L
how do you escape from a game? Is It possible to have both the functionalities with the same controller?? (rpi and external controller with the encoder)
i think they went defunct a few years back. Better to get an Arduino pro micro and the DaemonBite firmware github.com/MickGyver/DaemonBite-Arcade-Encoder.
@@RetroBuiltGamesDarn, im a bit disappointed, the kade interface looked rather user friendly. I have got an Arduino, not a micro tho but i shall see how to set it up between the controller components and the cable going to the console. :)
Pretty awesome... especially since my pi 3 is due to arrive tomorrow.
that looks fucking amazing i liked the neo geo ver before you started then i saw the psone ver and fell in love
Loved it, watched so many videos and I was never sure where to connect the ground wire daisy chain until now :)
My bad. Audio is fixed!
Ryan Bates I went to your site and I'm trying to buy one but I can't Find the "add to cart" button...
How much is each kit? Also if I bought two, can I connect the other one via USB to the one with the pie to use as another controllers so it. Can be two players?
Try "view in desktop mode" for your browser.
A Full kit is 128 + shipping. You can do a two a 2 player setup as you described
Ryan Bates awesome! So how would I use both fightsticks if they both have RP3s in them? That's where I'm confused, how would I use one as just a standalone course controller/fightstick?
Oh, you meant with TWO Pis and TWO fightsticks. Easiest way: The 2nd fightstick (slave) would have to contain a keyboard encoder with a USB plug going into it's Pi, When you want a two player setup just unplug USB connection from slave fight stick and plug into master.
Better to go about it a more traditional Slave/Master route. One FSv3 has a RPI, the other is just a vanillia USB joystick like this: www.retrobuiltgames.com/porta-pi-arcade-help/2-player/
Ahhh okay, And I was trying to buy a FSv3 and/or The JammaArcade 2P, But youre sold out :( :( .....Thanks for the answer btw! MUch Appreciated!
Cool kit wish it could fit 30mm buttons
I really didn't get how u installed the power button, could you explaim in what pins you pluged?
Congratulations, great work. Thanks!
I had an idea for making a "universal" arcade stick/controller. Probalby mroe trouble than it's worth but I was going to buy one of those gamestop-branded DDR pads with the PS2/GC/xbox connectors coming out - they seem to be common at thrift stores - and wire up the buttons in place of all those dance pad surface buttons (could probably use old guitar hero things as well). Probably easier just to use a specialty encoder/arduino for a such a thing. I mean if soldering would be involved anyway.
This is a good idea, you should do it.
If you find a DDR pad that has more than the O and X buttons I'd like to know what brand. Konami brands only have up, down, left, right, Start, Select, X, O- which limits the usefulness of a fightstick...
I don't know if this link will paste/stay or not, but here's a four button/directions/start/select for ps2 and gamecube:
www.amazon.com/Gamestop-Game-Cube-Dual-Platform-Dance/dp/B0002SZN98
[amazon: *Gamestop PS2 / Game Cube Dual Platform Dance Pad*]. not sure that's enough for stick or not but more than the two anyway.
nice ! well done ! nice project and product !
Great work! also love the artwork!
Hey! great video, love the artwork... Good and thorough explanation. However, did you skip the part of not programming the Pi for the GPIO pins, or is it not necessary? I appreciate your answer. Keep building great projects,again thank you
google 'retrogame adafruit' for GPIO programming
Love your videos! Could you explain how to wire the DC jack and on/off switch to the RPI? Maybe with a scheme? Thanks!
+Allan Valente Sure. See the 2nd to last page of this manual I made. www.retrobuiltgames.com/app/download/7118702641/Fight+Stick+Assembly+Manual+v1.0.pdf
+Ryan Bates Thank you!
Awesome creations, I think you're PlayStation one joystick would have looked better if the entire thing was silver just like your red Neo Geo one how the sides are red to match the top but great job I wish I could make those myself just like you!
to the people asking how much, click read more in the description, there is a link
really good job. I'm looking to make a project that uses similar buttons to the arcade buttons you used. (pi mp3 player with simple navigation buttons) Any information you can provide about those? Generally the entire process of wiring hardware is confusing me a lot, I've spent so many hours looking at videos but not sure that I'm going about this properly. Any resources on learning about wiring you could reccomend? Using a breadboard vs not is confusing, why some wiring projects requires soldering and some don't (i know has something to do with the connectors - but are those specific to the hardware or can you make any wires connect without solder if you have the right wire type / conncetors?) Anyway just hoping for some tips. Nice video hope you're enjoying your arcade controller.
Awesome vids Ryan. Hey do you know when you will providing more of the DIY arcade fight sticks (shell). Was trying to purchase one from you but said you are sold out. Thanks!
Maybe mid Feb? real answer is, 'when they are ready'
Ryan Bates sounds good. Thanks for the response!
Hi Ryan Bates, can you restock your wood panel kit + binding post on your site please
can you make a video about how to make a universal fightstick for xbox 360 , xbox one ps3 ps4
I really want to watch this, but I'm not getting any sound.
Woo I very like , I want 1 Fight Stick YOU have
Where can I buy Kade? I couldn't find it on Amazon. Is there alternatives?
I went to your site and I'm trying to buy one but I can't Find the "add to cart" button...
How much is each kit? Also if I bought two, can I connect the other one via USB to the one with the pie to use as another controllers so it. Can be two players?
thanks
6:06-Will I be able to build it with the full kit if I have no expirience in this kind of stuff? and will I have to do 5:17
or will it be included in the kit finished?
I have no way to answer that first question; only you know if you can. You must make the wire harness shown in the video @5:17.
okay, thanks
for 2 players only make the same call in raspberry? or need two raspberrys?
what kind of wire cutters and crimp tool is that??? anyone?
Is that a Seimitsu joystick? Also what kind of buttons are those and what microswitches do they use?
+NinjaRed5000 Sanwa JLF joystick. buttons are suzo Happ. They use E-Switch Snap Switch microswitches, that require 50 grams of force to activate. na.suzohapp.com/products/pushbuttons/58-9100-L
+Ryan Bates Nice, though personally I would've gone with IL buttons instead of Happ.
Can I make a Sega Saturn Arcade Stick with this?
how do you escape from a game?
Is It possible to have both the functionalities with the same controller?? (rpi and external controller with the encoder)
It looked like some input delay on the Raspberry Pi.
does the kade software work with other encoders? also, is there any way i can use the usb part of the encoder rather than wiring it?
+Ryan Bates how do make it 2 player
+rover 259 Wild plug in a usb joystick is the easy solution
What kind of wood is that?
the arcade controller u used the kate works on xbox and xboxone?
how do you do the power button? is it a straight power cutoff?
What are the dimensions for this fightstick?
i need this but the shipping cost to italy is too expensive :(
I want to make one for xbox one how to do it please?
What if I want to add two smaller analog sticks and L3 and R3 buttons?
+Robert Weatherholt drill more holes
BTW, have you seen ( or at least, heard about ) HORI's Dead or Alive 5 Fighting Stick ( with analog stick hub ) for the PS4?
I have
How much will you charge me to build one for my original xbox?
Still have some for buy?
what is that ribbon cable called, I'm trying to find exactly what I need to order
Female / Female Dupont, is one way. OR add 'arduino' and '0.1 pitch' as tags and you should find it under 'ribbon cable'
I want buy the boards
is it possible for you to make one for the original xbox like a 2 player arcade stick or even one?
it is possible with the kade
what you mean with the kade?
explained in video
ARE YOU SELLING ANY OF THEM
Do u have a lot for Xbox one ?
this is how much money you've just done a?
Stiker snk please
Hey Vsauce here
where to byu a kade device ?
i think they went defunct a few years back. Better to get an Arduino pro micro and the DaemonBite firmware github.com/MickGyver/DaemonBite-Arcade-Encoder.
@@RetroBuiltGamesDarn, im a bit disappointed, the kade interface looked rather user friendly. I have got an Arduino, not a micro tho but i shall see how to set it up between the controller components and the cable going to the console. :)
Thanks for your comment !
will you make me one please
How much would you charge for this.
let's do business Sir💰💰💰
No sound... just music :/
^^