@P'KNOCKS Construction You're welcome and thanks for the reply. I placed an order and it'll arrive on Thursday. Which battery are you running? I'm having a hard time finding a battery that RC4WD recommends.
@@RobertRC absolutely can’t go wrong w/ the 360L I have one and have created some cool concepts for attachments. Just currently picked up its baby excavator the double e 160 magom hydraulic version w/ a few upgrades. It’s cool as hell also. Smaller yet solid unit.
Does the teeth on the bucket make contact with the boom arm when the arm is fully pull back toward the excavtor and then bucket curled up? Im using the quick release with stock bucket and when bucket it curled up the teeth will scratch under the boom arm. Just wondering if yours does that with quick release and stock bucket or the new bucket in the video. I have to file the teeth down to make clearance so the teeth wouldnt hit under the boom arm.
@1pknocks mine doesn't snag on the hoses. But the teeth do hit the bottom of the boom arm. Which sucks. Not sure why when they make the quick release, they don't tested it out for clearance. I have to file the teeth down like 1/2 inch so it doesn't hit the boom arm. Wish there is a way to adjust travel limit. I tried adjusting subtrim and endpoint. Didn't do anything.
![ทัศนศึกษาโรงงานผลิตโค้ก [THAI/ENG SUB]](http://i.ytimg.com/vi/M9y-TJBNem0/mqdefault.jpg)
Working the beast hard 💪🏼
Yes! I have to put it to work.
Good Job...👍👍
Thanks
we have a lot of stuff in the same vehicle
I try to keep all the necessities.
Get yourself a ripper claw for that tough stuff the toothed bucket worked great though 👍
Thanks! I also have one. I'm going to work with it next time.
❤❤same buckets too
What do you think about the excavator?
I think it's a wonderful vehicle, well made and powerful
Very cool video! I'm going to buy an excavator soon, and I'm pretty much zeroed in on the 360L. Is there anything about it that you don't like?
Thank you for the kind words. Nothing I would change on it besides the upgrade. If I could play with it everyday I would. This is a great machine.
@P'KNOCKS Construction You're welcome and thanks for the reply. I placed an order and it'll arrive on Thursday. Which battery are you running? I'm having a hard time finding a battery that RC4WD recommends.
Zeee 3S Lipo Battery 5200mAh 50C 11.1V RC Batteries with XT60 Connector Soft Case for RC Airplane Helicopter Plane Quadcopter RC Car Truck Boat
You will love it. You will need a truck and trailer to pull it. It's super heavy, unless you are not traveling far.
@@pknockslifestyle Thanks for the battery recommendation. I like the truck and trailer set up you have. What's the upgrade you mentioned?
👍🏻👍🏻
thanks
Mantap bang 👍👍👍
Thanks
Did you order your excavator and trucks at toucan hobby, and if so, are you happy with it?
Sorry for the late reply. I purchased the excavator from RC4WD. I love this machine. It's a monster especially the buckets.
@@pknockslifestyle 👍
@@RobertRC absolutely can’t go wrong w/ the 360L I have one and have created some cool concepts for attachments. Just currently picked up its baby excavator the double e 160 magom hydraulic version w/ a few upgrades. It’s cool as hell also. Smaller yet solid unit.
What pressure is the pump running
I believe it's running at a 2.5 MPA
Vi marako ak jcb doga
thanks
Does the teeth on the bucket make contact with the boom arm when the arm is fully pull back toward the excavtor and then bucket curled up? Im using the quick release with stock bucket and when bucket it curled up the teeth will scratch under the boom arm. Just wondering if yours does that with quick release and stock bucket or the new bucket in the video. I have to file the teeth down to make clearance so the teeth wouldnt hit under the boom arm.
Yes, it can snag the rubber hoses. I'm careful when curling inside. I purchased the metal hydraulic lines for the excavator from ali express.
@1pknocks mine doesn't snag on the hoses. But the teeth do hit the bottom of the boom arm. Which sucks. Not sure why when they make the quick release, they don't tested it out for clearance. I have to file the teeth down like 1/2 inch so it doesn't hit the boom arm. Wish there is a way to adjust travel limit. I tried adjusting subtrim and endpoint. Didn't do anything.
OITEORSCK