Bunn G9 commercial coffee grinder coarseness and timer adjustment tutorial
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- This is how to adjust coarseness and timer for the old version of the Bunn G9 grinder. The instruction manual is written very poorly and there are no videos out there showing you how to do this, so I had to figure it out myself.
You’ll need a 24mm socket to loosen the coarseness adjustment screw nut, and a flathead screwdriver for all screws.
The timer is located behind the faceplate beneath the chute opening. You’re welcome in advance 😂✨☕️
Big help thank you
Thank you!!
Why does this vid keep getting recommended to me lol
lol you must really need to adjust your bunn g9 commercial coffee grinder coarseness and adjust its timer
Thanks!
Any luck with cleaning this baby? But having alot of trouble with taking it apart and cleaning it well. Just bought a used one.
greeting! i have not tried taking it apart or cleaning at all. if you are getting residue from old coffee oils, i would recommend checking out Tabz grinder cleaning tablets: www.amazon.com/Urnex-Professional-Grinder-Cleaning-Tablets/dp/B0014J7FUY/ref=asc_df_B0014J7FUY/?tag=hyprod-20&linkCode=df0&hvadid=309735741984&hvpos=&hvnetw=g&hvrand=9026156041971040945&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031182&hvtargid=pla-347658283862&psc=1
this should help if there are any flavor issues you notice. the coffee you grind immediately after using these tabs however will still have some of the cleaning tablet powder mixed in, so be sure to discard the coffee that you grind immediately after using them.
depending on frequency of use, you could clean using these tabs once a week (though I truthfully do it less frequently than that). when i worked at the cafe we cleaned the grinder with tabz every day.
hope this was helpful!
Hey. I have the same machine. People from the company told us to use oil losener. Just a little bit the we could move the bottom. We did move it. It was tough. We wanted finest grind. Now the grinder stop working. Do you know how to clean it?
Thx for the reply! I haven’t tried cleaning it yet. Maybe I will figure that out and upload a video about that! Sorry to hear about your machine-I hope it starts working soon! Did you use a socket to loosen the nut like I showed in the video?
@@ralphiegixenflargle we did use WD 40. That’s the oil. Just a little bit. English is my second language
I do roast my coffee oily. I guess that’s why the grinder needs a cleaning.
Could you use this grinder for expresso
Hi Riley,
I have not tried to use this grinder for espresso and I would not recommend it.
Cheers!
Is it possible to remove the burrs completely?
hi Chad, sorry for the late reply. I have not tried to remove the burrs at all. If I get around to it, I will upload a video in the months following New Years. Cheers
@@ralphiegixenflargle coffee