Was this worth your time? I ask because I'm always trying to decide how far to go when scraping. Half the time I go to get rid of junk steel and end up taking things out of the scrap yard. :) (I always go back to payoff the scrap yard guard with his favorite soda.)
About 20 years ago, I had 10 rooftop units that had compressors that big! Just sent them off as compressors. But the units had aluminum casings, and copper aluminum rads about 9" thick!! Both the compressors and the rads were 2,500 lbs each total and was a VERY good payday!!!
That was a very good video. Not to many times do people get a chance to see what's in a compressor that size. Looked a little bit tricky to get the windings out but you did an awesome job to do so. Really enjoyed watching. Thank you.
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Maybe you can use a rubber band to tighten the pliers , and put something under the stator when you use the puller ,so it stays in place. Small changes make a huge difference.
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Brother awesome scrap out .. I’ve got a question for you we were just discussing this at work scrapping these out ..And my question is somebody heard when they go bad the oil Ashley gets aesthetic is that true .. thank you brother 👊🏻
@@streetcopper1151 that oil is toxic either way my friend (not dangerous much) but yes it's true that it will turn in more toxic..... The bad thing is the fumes when you cut them or you use the plasma cutter..... You have to do it in a well ventilated space or best outdoor... The worst for me is the dust from the angle grinder wheels...
Totally agree with you my friend.... The thing is that here I would get 30-35$ for that as it was.... now I would get around 50$... that is not a good profit but I wanted to show that the big motors (or compressors) don't have a good ratio steel/copper. I prefer to cut the smaller compressors.... Thank you for watching and commenting my friend.
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
No I would not do it again my friend.... I knew how much was inside (I opened other in the past) but I wanted to show to other fellows the ratio steel/copper from big motors. But I will continue to cut the smaller compressors of curse 😁
The think is that if I sold it as it was I will get 25€ and if I cut it I will get 50€..... Doubling my money (minus 1 cutting weel) isn't so bad for 1 hour job.... If I had the price that you have over there for the compressors I wouldn't even touch the grinder 🤣🤣🤣
Τα μεγάλα μοτερ η συμπιεστες δεν έχουν περισότερο χαλκό (κατ αναλογία)..... Κ έχουν περισοτερη κούραση κ δουλειά για να ανοιχτουν... Προτιμώ τα μικρά μοτέρ (όχι οτι με χαλάνε τα μεγάλα🤣) γιατί ανοίγουν αρκετά ευκολα.
Check my other video please.... th-cam.com/video/aYmMR7O9efc/w-d-xo.html.....
Was this worth your time? I ask because I'm always trying to decide how far to go when scraping. Half the time I go to get rid of junk steel and end up taking things out of the scrap yard. :) (I always go back to payoff the scrap yard guard with his favorite soda.)
About 20 years ago, I had 10 rooftop units that had compressors that big! Just sent them off as compressors. But the units had aluminum casings, and copper aluminum rads about 9" thick!! Both the compressors and the rads were 2,500 lbs each total and was a VERY good payday!!!
That was a very good video. Not to many times do people get a chance to see what's in a compressor that size. Looked a little bit tricky to get the windings out but you did an awesome job to do so. Really enjoyed watching. Thank you.
Thank you my friend😁😁😁
Nice haul of copper scrap. Almost 11 ponds.
That's worth about $30.00 - $45.00 here in Oregon. Not a bad day's pay. Nicely done sir.
Greetings from Napa Valley, CA, USA!! Keep them coming! I love your videos!!
Nice pile of copper there. Won't be surprised to see it going for $5.00 per pound some time next year. Lets go Branden.
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Very cool content🔥🔥, thanks to the author🤗. I also shoot a video about Copper💥
🔥🔥🔥🔥
💥
😯😯
woow this compressor whas biig, and alot of copper ;) yummy awsome ;)
5 kilo dame ;) awsome
😁😁😁😁😁
Nice
That’s a darn big ole compressor. I have never seen one that big. Thank you for sharing.
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Another great video and copper haul.
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
Win some and lose some, but great Video Sir
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
10lbs of copper is 10lbs of copper. Nice haul. Just a very heavy Sealed unit
Wow that compressor had a lot of copper in it great video, newly subscribed 👍🏻👍🏻
Very good scrapping brother. You are not afraid of hard work to recover the nectar. I scrap like you. Just subscribed
Thank you my friend. I really appreciate your support 😁👍👍
As always great job from the best 👌
The best of its kind!!!!! ✌️
😁😁σ'ευχαριστώ πολυ φίλε μου Σταυρό.... Λίγο υπερβάλεις αλλά το δέχομαι 😁😁😁
Cool, you are definitely going to get a good chunk of copper out of this one 👍👍😊
It wasn't bad I will say 😁
@@simplescrapping Almost 5 kg, I would say that's great 👍😃
Thats a chunky compressor - surprised it didn't weigh more than 220. Shocked it only netted 11 lbs of copper. But that bucket is looking great.
I did expect that amount my friend.... Bigger motor don't have more copper than the small ones (%) ..... Thank you for watching my friend😁
Good job Bro
Good one mate, I have never seen such a large compressor
New angle grinder? 230 mm Disc Size?
Maybe you can use a rubber band to tighten the pliers , and put something under the stator when you use the puller ,so it stays in place. Small changes make a huge difference.
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
What kind of clamps are you using to pull the copper out? Trying to build my own copper extractor
I love seeing people make something out of nothing 1 man's rubbish is definitely another mans tresure 👍
Thank you for watching😁😁
Probably from a 8 or 10 ton air conditioner
Brother awesome scrap out .. I’ve got a question for you we were just discussing this at work scrapping these out ..And my question is somebody heard when they go bad the oil Ashley gets aesthetic is that true .. thank you brother 👊🏻
I'm sorry buddy but I don't understand you question 😟..... If you mean that it will turn in more toxic than it was before?
@@simplescrapping yes sir
@@streetcopper1151 that oil is toxic either way my friend (not dangerous much) but yes it's true that it will turn in more toxic..... The bad thing is the fumes when you cut them or you use the plasma cutter..... You have to do it in a well ventilated space or best outdoor... The worst for me is the dust from the angle grinder wheels...
That was awesome‼️ now put it back together lol
🤣🤣🤣
Isn't this normally filled with oil?
That’s like $40. Even if that took you an hour it’s worth it. Nice score off that.
I sold 3 of them 217 pounders for $65 each to my scrap yard, I think made a better deal to sell them as is
Totally agree with you my friend.... The thing is that here I would get 30-35$ for that as it was.... now I would get around 50$... that is not a good profit but I wanted to show that the big motors (or compressors) don't have a good ratio steel/copper. I prefer to cut the smaller compressors.... Thank you for watching and commenting my friend.
so roughly 1/20th the weight of the compressor was copper. Good to know to figure out effort vs payoff.
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
@@CopperKing I already was!
Nice copper from that compressor 5 kilo good weight
Thank you m8. The truth is that the ratio steel/copper wasn't good....
What do they grade that copper as ? Bare bright
No2
Everything was done good only need to wear gloves it has oil which is not good for skin and not to mention nasty smell it leaves
Hi my friend, I am shooting interesting videos about copper, come to my channel, I am sure you will like it. I would be very grateful if you subscribe to the channel. Thank you 🤗🤝
So what did it weigh ?? I could not tell!!! I'm thinking 10lbs ???-- look like it said 14lbs.9 oz???
Well now that you have scrapped a compressor that size for 4.9kg copper do you think you would do it again?
No I would not do it again my friend.... I knew how much was inside (I opened other in the past) but I wanted to show to other fellows the ratio steel/copper from big motors. But I will continue to cut the smaller compressors of curse 😁
@@simplescrapping im glad you said no coz definitely not worth the time and effort on them big motors.........Have a fantastic day buddy.
The think is that if I sold it as it was I will get 25€ and if I cut it I will get 50€..... Doubling my money (minus 1 cutting weel) isn't so bad for 1 hour job.... If I had the price that you have over there for the compressors I wouldn't even touch the grinder 🤣🤣🤣
@@simplescrapping I understand mate, yes double money is always good especially when you know its a guarantee.
$25 now...
Μοτέρ γίγας 😀
Αρκετά μεγάλο ναι... Αλλά άσχημη αναλογία σε χαλκό....
@@simplescrapping οντως μονο 5%!!!!!!!!!!Αν ηταν 8-9%θα λεγαμε οτι ειναι οκ!!!!!!!
Τα μεγάλα μοτερ η συμπιεστες δεν έχουν περισότερο χαλκό (κατ αναλογία)..... Κ έχουν περισοτερη κούραση κ δουλειά για να ανοιχτουν... Προτιμώ τα μικρά μοτέρ (όχι οτι με χαλάνε τα μεγάλα🤣) γιατί ανοίγουν αρκετά ευκολα.