It works on my Brother MFC 2700DW. I have already bought a new toner but It will arrived next week. You make me print documents this week. Thank you so much!!
THANK YOU SO MUCH for taking the time to make a simple and clear video for something that has been bugging me for days and now I can print out a bunch of stuff without taking the toner cartridge out and putting it back in which is how I was managing this-always GREAT to outthink the machines:)
Thank you! I tried all other options to no avail...and almost ordered a new drum kit. Thank the Gods and the Force for the internet:-). You, Sir or Madam, are a true Jedi Master!
that is pure magic! It worked! Many thanks! My boss is a little worried because her tech guy told her that message will never disappear and she should just live with it. I couldn't stand that message and wanted it gone.
It's not sad Brother doesn't tell you. Brother does this premature low toner message so you think you have to buy new toner when your cartridge is still about half full! On my old brother I had to use electrical tape over the sensors on the toner cartridge to extend the toner cartridge life. Thanks for the video to the original poster and good to know on my new brother that it should be as easy as open door, do a few key presses, and I'm off and running again until it's truly time to replace the toner cartridge.
This will not work on the DCP-L2540DW printer since there is no numeric keypad for the *00 entry etc. I found the solution which worked perfectly for me: Printer Model: DCP-L2540DW. Toner Model: TN-660 / TN-630 Question: After changing the new toner, it still shows "Replace Toner", "Toner Low" or "Toner Ended". Answer: Please try the following steps: a. Make sure the printer is turned on. b. Open the front cover. c. Perform the following steps to reset the rotation count for the TN660: i. With the front cover open, the LCD should display "Cover is Open". ii. Hold the MENU button down for 5 seconds until Reset Menu is displayed. iii. Press the UP ARROW until TNR-HC is displayed. iv. Press the OK button. v. Press the UP ARROW to reset. The LCD will briefly display "Accepted" close the cover and press the clear button to get back to the regular copy menu, voila no more "replace toner" message. Took me over an hour to find this, it was a pdf on 123InkCartridges Canadian web site. I will be ordering from them next time! Very helpful web site!
+Terry Proveau Thank you!! Worked on my MFC L2700DW. I was so frustrated, my last brother was the *00 reset and you just solved my problem! Much obliged! Thank you!
Yep totally worked!! Also doubling up with my electrical tape hack to cover the sensing port on the toner!!! My toner and drum have lasted me like over a decade.
thanks for this video. I was in the MIDDLE of a printing project on starter cartridge when the black toner gave me this message. I was so upset that I did not look for an answer.. I should have known lol...everything is on TH-cam. Oh well, now I know and will save money have to make copies lol
Thank you for your video, he answered my question and it works for MFC-7460DN model. Merci pour ton video, il a répondu à ma question et ça fonctionne pour le modèle MFC-7460DN.
still works in 2017 for my mfc 7860dw .. Installed brand new Brother brand toner and still says replace toner . What a scam these printer companies have going . Thanks for the fix
Did not work on MFC-DL2540DW when I replaced the toner cartridge from the second, brand new printer with new starter cartridge. There should be a work around I hope. If we can't use a new starter cartridge, it's not a good sign for customers.
Didn't work . Had a relatively new remanufactured cartridge. tried resetting the gear on the side and trying this method. No joy on a DCP 8060 (less than 7500 total prints so the machine doesn't seem to be faulty). Ended up replacing with a non-Brother refill cart and it works (for now). Suggestions?
+wilshiresun You may have already found for MFC-L2700DW drum reset. I just found it tonight. The OK button needs to be held down for a couple seconds for our printer(got this from the Drum Unit Replacement Guide download from Brother)p 3
Wow thanks. Guess who just looked like a rock star to that pretty girl at the office. She was all flustered and i walked by and quickly TH-camd this video and went back casually and said " Is everything alright'? then i say " is that all, let me take care of that". lol While i was doing it i was thinking "please work *00 or i will look pretty stupid". BINGO a smile and no longer invisible. I owe you one. Cheers
+Bir K Gurung Printer Model: DCP-L2540DW. Toner Model: TN-660 / TN-630 Question: After changing the new toner, it still shows "Replace Toner", "Toner Low" or "Toner Ended". Answer: Please try the following steps: a. Make sure the printer is turned on. b. Open the front cover. c. Perform the following steps to reset the rotation count for the TN660: i. With the front cover open, the LCD should display "Cover is Open". ii. Hold the MENU button down for 5 seconds until Reset Menu is displayed. iii. Press the UP ARROW until TNR-HC is displayed. iv. Press the OK button. v. Press the UP ARROW to reset. The LCD will briefly display "Accepted" close the cover and press the clear button to get back to the regular copy menu, voila no more "replace toner" message. Took me over an hour to find this, it was a pdf on 123InkCartridges Canadian web site. I will be ordering from them next time! Very helpful web site!
+Terry Prove The original solution did not work for my MFC-L2700DW but this one did. Very simple. Did away with the "replace toner" message and allows printing again with same toner cartridge. And the quality is the same as it has been all along with this toner cartridge. Watch it last another few months! I will use it until print quality is unreadable. Thanks very much.
![ไลฟ์สุ่ม iPhone 295 บาท... โกงมั้ย?[ โกงมั้ยครับ ep.97 ] | DOM](http://i.ytimg.com/vi/gdstHEE4UUE/mqdefault.jpg)
It works on my Brother MFC 2700DW. I have already bought a new toner but It will arrived next week. You make me print documents this week. Thank you so much!!
THANK YOU SO MUCH for taking the time to make a simple and clear video for something that has been bugging me for days and now I can print out a bunch of stuff without taking the toner cartridge out and putting it back in which is how I was managing this-always GREAT to outthink the machines:)
Thank you! I tried all other options to no avail...and almost ordered a new drum kit. Thank the Gods and the Force for the internet:-). You, Sir or Madam, are a true Jedi Master!
Thanks very much for this. I was almost giving up and tired of REPLACE TONER error. My printer is now working
that is pure magic! It worked! Many thanks!
My boss is a little worried because her tech guy told her that message will never disappear and she should just live with it. I couldn't stand that message and wanted it gone.
I almost shipped my toner back believing it was defective! Thank you for saving me the time and money!
How simple, and it works!! I tried numerous other tips that did not work.
Thank you so much!
It worked on my mfc-7860dw. Geek squad from Best Buy couldn't offer me this advice! Thanks so much!
It worked and now you and I are best friends!
Thank you it worked to clear the message low toner, when I replaced it with a compatible, it continued to show the message...
I am seeing this same problem. MFC-8890dw. this trick did not solve my problem.
Thank you for this - my printer is back! Sad that this info is not on the Brother site.
It's not sad Brother doesn't tell you. Brother does this premature low toner message so you think you have to buy new toner when your cartridge is still about half full! On my old brother I had to use electrical tape over the sensors on the toner cartridge to extend the toner cartridge life. Thanks for the video to the original poster and good to know on my new brother that it should be as easy as open door, do a few key presses, and I'm off and running again until it's truly time to replace the toner cartridge.
Yes!!! You guys rock! New toner cartridge and thanks to you it now works!!!
This is why I love the internet.. Thanks!!
Me too.
This will not work on the DCP-L2540DW printer since there is no numeric keypad for the *00 entry etc.
I found the solution which worked perfectly for me:
Printer Model: DCP-L2540DW. Toner Model: TN-660 / TN-630
Question: After changing the new toner, it still shows "Replace Toner", "Toner Low" or "Toner
Ended".
Answer: Please try the following steps:
a. Make sure the printer is turned on.
b. Open the front cover.
c. Perform the following steps to reset the rotation count for the TN660:
i. With the front cover open, the LCD should display "Cover is Open".
ii. Hold the MENU button down for 5 seconds until Reset Menu is displayed.
iii. Press the UP ARROW until TNR-HC is displayed.
iv. Press the OK button.
v. Press the UP ARROW to reset. The LCD will briefly display "Accepted"
close the cover and press the clear button to get back to the regular copy menu, voila no more "replace toner" message.
Took me over an hour to find this, it was a pdf on 123InkCartridges Canadian web site. I will be ordering from them next time! Very helpful web site!
+Terry Proveau Worked for me on MFC-L2700DW. Thank you!
+Terry Proveau Thank you!! Worked on my MFC L2700DW. I was so frustrated, my last brother was the *00 reset and you just solved my problem! Much obliged! Thank you!
+Duxplore Inc Glad to have helped!
Thanks, that's great. I am pretty sure the cartridge has got a plenty of prints left on it. Now I can use them up to the last drop:)
Oh I so grateful for this short but highly informative video.... I really appreciate. Thanks alot
Dude it works for MFC series ! Another treat to add to it open the side and reset the white arrow as well.
not for my 7820N
Many thanks. Worked for the Brother MFC-7860DW
THANK YOU! What would we do without the internet? I have been trying to fix this issue for days!
Phenomenal! Worked perfectly on my MFC-7440N. Thank you so much!
Yep totally worked!! Also doubling up with my electrical tape hack to cover the sensing port on the toner!!! My toner and drum have lasted me like over a decade.
This worked for my brother mfc 8710 !! Thank you!!!
Worked perfectly on Brother MFC 8710
It worked! Thanks for the video, my printer is up and running again!
From Nigeria 🇳🇬
It work for me ❤️
You're the best you helped me allot GOD keep bless your wisdom
thanks for this video. I was in the MIDDLE of a printing project on starter cartridge when the black toner gave me this message. I was so upset that I did not look for an answer.. I should have known lol...everything is on TH-cam. Oh well, now I know and will save money have to make copies lol
Fantastic!! I appreciate the help. Simple and fast.
Worked on the MFC7860DW. Thanks!
Thank you for your video, he answered my question and it works for MFC-7460DN model. Merci pour ton video, il a répondu à ma question et ça fonctionne pour le modèle MFC-7460DN.
Great job this also works for the MFC 7840 except I didn't need to put in the *00
Thank you....
it worked on my MFC7840 W, it prints again, but I still get the message "low toner"
still works in 2017 for my mfc 7860dw .. Installed brand new Brother brand toner and still says replace toner . What a scam these printer companies have going . Thanks for the fix
THANKS A LOT!
It worked on my Brother MFC-8710DW Printer...
THANK YOU! I can finally print in peace again.
Worked great on my mfc-7860dw. Thx!
Thank you for easy to follow instructions that work
worked perfectly for my MFC7860DW printer
I have the same model and it did not work, still telling me to replace the toner and beeping at me and will not print:(
Thank, this worked for a MFC 7362N as well save me buying a new printer!
perfect - thank you! and to think of all the cartridges i've thrown out with who-knows-how-much in k in them!
thnaks for your video it solve my problem
La única solución en internet que realmente funciona!!! Thanks!
It is working!!!!!!!!!!! wow!!!!!!! you saved me.
Did not work on MFC-DL2540DW when I replaced the toner cartridge from the second, brand new printer with new starter cartridge. There should be a work around I hope. If we can't use a new starter cartridge, it's not a good sign for customers.
2 years later, fixed? Pull out the cartridges and put back in, has a message like has the toner been replaced? yes. Did it for me
Didn't work . Had a relatively new remanufactured cartridge. tried resetting the gear on the side and trying this method. No joy on a DCP 8060 (less than 7500 total prints so the machine doesn't seem to be faulty). Ended up replacing with a non-Brother refill cart and it works (for now).
Suggestions?
Thank you! Quick and easy fix.
This is great, it is simple and it works!
Thank you very much
My Printer now working normally
this video saved me
Hi Mike B,
I have the same problem. Did you find a solution for MFC 2700dw?
+wilshiresun You may have already found for MFC-L2700DW drum reset. I just found it tonight. The OK button needs to be held down for a couple seconds for our printer(got this from the Drum Unit Replacement Guide download from Brother)p 3
Thanks a lot!!! I needed to do my school project which is due tomorrow and it wouldn't
work.
Wow thanks. Guess who just looked like a rock star to that pretty girl at the office. She was all flustered and i walked by and quickly TH-camd this video and went back casually and said " Is everything alright'? then i say " is that all, let me take care of that". lol
While i was doing it i was thinking "please work *00 or i will look pretty stupid". BINGO a smile and no longer invisible. I owe you one. Cheers
Excellent!
This worked like a charm! Thank you!!
Very helpful thank you so much
thx budy it worked for me
Perfect! Nice, simple solution. Thank you much!
It really worked. Thank you very much!
simple and brilliant thanks
A lot of thanks!
You guys rock!!! totally worked!!!
your a lifesaver man
Thank you so much, this video was a pocket saver:)
Thanks for this suggestion. It works!
Thanks!
Gracias
Works on my MFC-8370DN too
thank you so much! you are a life saver!
thank you so much!
Great help! It works!
Thanks a lot it worked
It worked for me, thans a lot.
Thanks sir
Bravo!
super helpful, thanks
great video. thank you so much
can you please show me how to fix the low toner mode with Brother's DPC L2540DW Series printer?
+Bir K Gurung
Printer Model: DCP-L2540DW. Toner Model: TN-660 / TN-630
Question: After changing the new toner, it still shows "Replace Toner", "Toner Low" or "Toner
Ended".
Answer: Please try the following steps:
a. Make sure the printer is turned on.
b. Open the front cover.
c. Perform the following steps to reset the rotation count for the TN660:
i. With the front cover open, the LCD should display "Cover is Open".
ii. Hold the MENU button down for 5 seconds until Reset Menu is displayed.
iii. Press the UP ARROW until TNR-HC is displayed.
iv. Press the OK button.
v. Press the UP ARROW to reset. The LCD will briefly display "Accepted"
close the cover and press the clear button to get back to the regular copy menu, voila no more "replace toner" message.
Took me over an hour to find this, it was a pdf on 123InkCartridges Canadian web site. I will be ordering from them next time! Very helpful web site!
+Terry Prove The original solution did not work for my MFC-L2700DW but this one did. Very simple. Did away with the "replace toner" message and allows printing again with same toner cartridge. And the quality is the same as it has been all along with this toner cartridge. Watch it last another few months! I will use it until print quality is unreadable. Thanks very much.
THANKS FOR THIS VEDIO,THIS WILL HAPPEN
Thanks!
Obrigado pela informação. Tentei de várias formas e não consegui, mas com a informação deste vídeo a operação foi bem sucedida!
thank you thank you thank you you're genius
It worked. Thank you.
thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you....
thanks
Funcionou perfeitamente obrigado!!!!
Thanks a million!
Work it good thanx
Thank you!
Thanks so much!
Thank you for your post. Save me $$$ and headache. :) Thumbs up!
How to reset the toner sign on the HL-L2320D brother series
Thank u so much!!
Didn't work on my MFC-8120. Any other suggestions?
Perfect...thanx
What is the song? Reminds me of old school FPSs.
LOVE IT!! THANK YOU
THANK YOU!!!!!!!!!!!!!!!!!
thank you!!!
Works for MFC-78600DW.
Sweet. Tks!
Thanks bro its work......
Genius! Thanks!
not gonna lie...sick song.
I love you, it worked