@@peterkiptum5783 you can contours surface or survey data from chapter-1, go there on chapter-1 videos and find drawings and survey data in description of each video
After creating the roundabout with roundabout tool, problems i faced- 1. If inscribed circle Dia is changing, then center island Dia also changed and roundabout got created but it says road width for wb-20 too small. 2. after creating 1 approach, for rest of the approaches, not able to select alignment for approach. please suggest.
For the first problem, ensure that the road width for the westbound approach is adequate to accommodate the changes in the roundabout's dimensions caused by variations in the inscribed circle diameter. For the second issue, double-check that the alignment selection process is correctly applied to all approaches. Ensure that the alignment selection procedure is consistent across all approaches to avoid any selection errors.
Nice one
Thank you
Have you check the defection angle , where is lane marking, have you the all visibility analysis
Its was just basics overview for a client to explain little about roundabout
Sir mouza map ya jameen ka naksha ko satellite image per kaise set karte is per video banana
Already youtube pe iski video pari hn, agar per b apko chaye to m bna donga
@@Civil3dpro04 Sir video bna do🙏🙏
How do i drawing roundabout for left hand traffic without having to put in data that opposes the approach and departure lane
Use another criteria file or systems for left hand,
You will get them in roundabout dialogue box on 1st page
Hello sir, can you please post the data points to assist in following up what you are doing
Which data points you are asking?
Do you need survey data to create surface??
@@Civil3dpro04 yes
@@peterkiptum5783 you can contours surface or survey data from chapter-1,
go there on chapter-1 videos and find drawings and survey data in description of each video
@@peterkiptum5783 otherwise contact me at my social media then i will send you data
@@Civil3dpro04 c3d 2020 has these properties and utilities ?
After creating the roundabout with roundabout tool, problems i faced-
1. If inscribed circle Dia is changing, then center island Dia also changed and roundabout got created but it says road width for wb-20 too small.
2. after creating 1 approach, for rest of the approaches, not able to select alignment for approach.
please suggest.
For the first problem, ensure that the road width for the westbound approach is adequate to accommodate the changes in the roundabout's dimensions caused by variations in the inscribed circle diameter.
For the second issue, double-check that the alignment selection process is correctly applied to all approaches. Ensure that the alignment selection procedure is consistent across all approaches to avoid any selection errors.