Glue I use is called "88 Universal". Instruction: apply glue on both surfaces, wait about 10-15 minutes until the glue dries, squeeze the glued surfaces. The main advantage - glue is not squeezed out, because when you squeeze surfaces it is already dried. I know that in the USA similar glue is called "Contact Cement", I found a short review at TH-cam - th-cam.com/video/mLhgAPlY7lw/w-d-xo.html
для облегчения лакировки большого количества мелких деталей их лучше всего макать в банку с лаком и подвешивать над ней чтоб излишки лака стекали обратно в баночку.для избежания потёков лак развести растворителем пожиже.при недостатке лакировки процедуру повторить можно.с уважением к вашему труду и с пожеланиями творческих успехов
What blade are you using? I'm new to the scroll saw and the only blades I can find are much bigger and they all have pins on both ends that would never fit in the pilot hole you have made. Love the project, very well designed!
Subscribed straight away. Amazing work, a work of art no less. Any advice you may care to offer as regards the instant glue you use would be greatly appreciated.
Thanks, glue - it calls "88" of Ukrainian production, instruction: apply glue on both surfaces, wait about 5 minutes until the glue dries, squeeze the glued surfaces. Someone wrote me that in the similar glue calls "Contact Cement"
Alex Fox. Can't find the plans for this anywhere where you have left the links to. Without the proportions I don't stand a chance .Any further help or advice would be very helpful and most appreciated, thank you.
Alex Fox. Hi. I sent you my email as you asked regarding plans for this project., but have had no reply. Have I offended you in some way? I don't expect to have them for free and will gladly pay for them. Thank you again in anticipation of a response.
P.S. как вам идея подвесить такую звездочку не на леске а на тонком электропроводке и в центре звёздочки спрятать маленькую лампочку от ёлочной гирлянды.при достаточности размеров несколько лампочек попеременно переливающихся разными цветами будут смотреться очень красиво
This is real fretsaw art! I take my hat off to you.
Best regards from Andy from Germany
Outstanding, keep up the outstanding projects
Outstanding Alex good job keep it up👍🤝
Thanks
Amazing work! what did you use for adhesive at the connection points?
Glue I use is called "88 Universal". Instruction: apply glue on both surfaces, wait about 10-15 minutes until the glue dries, squeeze the glued surfaces. The main advantage - glue is not squeezed out, because when you squeeze surfaces it is already dried.
I know that in the USA similar glue is called "Contact Cement", I found a short review at TH-cam - th-cam.com/video/mLhgAPlY7lw/w-d-xo.html
@@AlexFoxScrollsaw Thank you so much!
Could I ask at what angle you sand the edges? Thanks!
I measured it by eye, unfortunately the pattern includes only the shape of details without any instructions of assembling
Can we turn it into a Lamp Shade made up of Mount Board ???
I have never used it, but I think it could be made
great work
thank you
How many pieces you use in this pattern.. 🙂by the way ..it's outstanding..👌 from Pakistan.. 💖
Thanks, project consists of 30 pieces
Hey...
What size have u taken too make it...
Write your email or contact me - alexscrollsaw@gmail.com and I will send pattern
Outstanding
Thanks
@@AlexFoxScrollsaw YW
Incredible work. Please keep it up.
для облегчения лакировки большого количества мелких деталей их лучше всего макать в банку с лаком и подвешивать над ней чтоб излишки лака стекали обратно в баночку.для избежания потёков лак развести растворителем пожиже.при недостатке лакировки процедуру повторить можно.с уважением к вашему труду и с пожеланиями творческих успехов
Спасибо за совет
Always love your work. Just curious....not seeing the pattern in the Free area.
munu - patterns - compound patterns
Thank you!! Definitely see a few others at your site I will be picking up once I am a bit more skilled
Wow, you amaze me over & over again. N.K :)
Great work. Where are the plans? I can't find them on your site.
munu - patterns - compound patterns
Is it possible to have the pattern? Thanks from an old customer 😉
Hi, write your email here or write me to alexscrollsaw@gmail.com and I will send it
What blade are you using? I'm new to the scroll saw and the only blades I can find are much bigger and they all have pins on both ends that would never fit in the pilot hole you have made. Love the project, very well designed!
I use only flat (pinless) blades. For this project I used blades #1 of LuxTools (Germany)
sin palabras simplemente hermoso
gracias
Could you share the pattern
Hi, write your email and I will send it, or write to me alexscrollsaw@gmail.com
Me too
Could you share the pattern
This would look beautiful as a wind chime..
Thanks for watching
mind blowing , to cool !!
Subscribed straight away. Amazing work, a work of art no less. Any advice you may care to offer as regards the instant glue you use would be greatly appreciated.
Thanks, glue - it calls "88" of Ukrainian production, instruction: apply glue on both surfaces, wait about 5 minutes until the glue dries, squeeze the glued surfaces. Someone wrote me that in the similar glue calls "Contact Cement"
@@AlexFoxScrollsaw Thank you for your kind and prompt reply, most appreciated.
Alex Fox. Can't find the plans for this anywhere where you have left the links to. Without the proportions I don't stand a chance .Any further help or advice would be very helpful and most appreciated, thank you.
Write your email and I will send it
Alex Fox. Hi. I sent you my email as you asked regarding plans for this project., but have had no reply. Have I offended you in some way? I don't expect to have them for free and will gladly pay for them. Thank you again in anticipation of a response.
P.S. как вам идея подвесить такую звездочку не на леске а на тонком электропроводке и в центре звёздочки спрятать маленькую лампочку от ёлочной гирлянды.при достаточности размеров несколько лампочек попеременно переливающихся разными цветами будут смотреться очень красиво
Great this channel thank you
Come faccio avere il disegno dei pezzi?
Ciao, scrivi la tua email e ti invierò lo schema
Is this pattern available on your new Etsy site? Can you provide a link?
Write your email and I will send pattern
@@AlexFoxScrollsaw amazing work anyway I could get the pattern sent to my email please lukepennington1982@gmail.com thanks
sachinbchougule.2010@gmail.com
Pls send pattern
Bonjour, je voudrais bien le modèle, c est vraiment magnifique merci
Доброго времени...
Это из 4 мм фанеры? спасибо...
да, березовая фанера 4мм
Mind blowing
Muito bom
I sent an email requesting the pattern. Thanks in advance!
Thanks for watching my videos, sent
@@AlexFoxScrollsaw help!!!
se que no lo leerán pero me dio risa porque muchos como yo se preguntaban cuantas piezas se ocupan y lo puso hasta el ultimo jajajajaja
Me parece que el creo 30 piezas por cada Estrella
I don't even have the patience to finish this comment, much less
:) Thanks for watching