More good information. I’ll never go anywhere but Global. Service, service and service are the three reasons I prefer them. Thanks for sharing 👍🏻👍🏻👍🏻🇺🇸
John Deere controls just always made sense to me. Awesome machine, congrats to "I Am Operator". I'll head over to his channel and give him a thumbs up too!!!
I've been thinking about getting the 310 for the last few months. Thanks for the great video as usual. But the wait time is beyond stupidly now..,as far as kubota is concerned. But now it's not limited to kubota.,All machines have a much longer wait time then 2 years ago. 🙄. Yesterday I did look at the cat 313fgc series with the smaller motor..Won't be running any high flow volume like a mower or anything. But in time maybe I get a stump sheer. Because I'm beating my kubota kx057-4 with lot clearing. Between your channel as well as cottontop3 channel I can see the everyday working of tree clearing. I did order a flail mower for the kx057-4 and that is going to take care of the thick undergrowth. Your video on the tb290 was extremely informative. Thanks again for all the information..
bobcats are hard to kill. Got a 2004 334 with 2300hrs. It’s great. Cab/heat thumb. We don’t do that work for a living but it does everything we need and more.
Cat controls all the way out here on east coast,sweet 310,our takieuchi 070 got double lift pistons and swing boom,think it's 17,500 lbs,tow with the 550 ,Reese hitch n.p,9 ton eager beaver,so glad your getting a tak
I can run both patterns, started on JD or backhoe and learnt CAT or ISO a few years back but if I'm around anything expensive or doing finish work the ol dome goes straight back to JD lol, so I quit tryin to be cool and run both. We have a 308 mc² or whatever the designation is and it's ok for what it is, my biggest problem with it is the damn seat is so F-lappin uncomfortable and a 6' 4 ogre don't fit so great in it. I will say it's better than hand work and is pretty quick and smooth
I've been operating heavy equipment for over 35 yrs cat is tough est .307 is faster in cycles.in an out of ground then the 311. But 311 is better balanced less jerky more fluid feeling under carriage is tough.keep the walking moters behind you tracks will stretch then there goes the sprockets. Cat control's all the way. Keeps curl an stick on separate controls more digging power flows through the valve body better then same two functions on same stick . don't operate at low throttle hard on hydraulic pump. They come from cat at 70% of power turn it up to 90 it will ripp that coupler apart. They turned the pressure down on the walking motor speed to compensate. I've run from 305 all the way to 600 size the top of the tracks are 6 ft tall you got to take the bucket the tracks and the counterweight off to haul it down the road it takes three semis.my father was the best operator in this county just ask around well respected he passed couple years back. He was catapiler all the way but like d case 3 stick with swing peddles total old school... But an excavator has two levers lever a and lever b if you don't know what you're doing it's leave or b ..10/4🤠 good day boys like your channel hot rod guy too MOPAR move over power approaching rapidly
The Takeuchi machines in my opinion are high end machines in comparison to the Cat's I had a chance to try both last fall and the Takeuchi came out on top over Crapapillar big time.
I never have got to run a new takeuchi but had a tb016 then stepped up to a tb125 takeuchi machines definitely seem to last longer then machines like bobcrap
I learned on a 4 stick Case backhoe and then a two sticker and when I went to an excavator I stayed with the backhoe controls. I tried the Cat controls and couldn’t get it right.
On the controls it's not really JD vs. CAT. Its more style preference. Backhoe style or excavator style for at least all the equipment I've operated so far
@@VBELTandSON seen a guy towing a d6k2 with a ram, and a guy towing a 135 komatsu with an f450. If you can put 32k on trailer axles and 6k on the ball that's 38k minus 8k for empty trailer weight, equals 30k on the trailer. A lot of weight for a dually for sure but it's been done...
I’m happy for Tavit, he’s doing well for himself. That 310 sure is nice
These are the kind of friends you want to have. Good ole boys!
More good information. I’ll never go anywhere but Global. Service, service and service are the three reasons I prefer them. Thanks for sharing 👍🏻👍🏻👍🏻🇺🇸
Good dealers kinda dictate what equipment you get. Service is everything
John Deere controls just always made sense to me. Awesome machine, congrats to "I Am Operator". I'll head over to his channel and give him a thumbs up too!!!
Yeah, buddy CAT for the win. A 310 is an amazing piece of equipment.
I've been thinking about getting the 310 for the last few months. Thanks for the great video as usual. But the wait time is beyond stupidly now..,as far as kubota is concerned. But now it's not limited to kubota.,All machines have a much longer wait time then 2 years ago. 🙄. Yesterday I did look at the cat 313fgc series with the smaller motor..Won't be running any high flow volume like a mower or anything. But in time maybe I get a stump sheer. Because I'm beating my kubota kx057-4 with lot clearing. Between your channel as well as cottontop3 channel I can see the everyday working of tree clearing. I did order a flail mower for the kx057-4 and that is going to take care of the thick undergrowth. Your video on the tb290 was extremely informative. Thanks again for all the information..
I started with the "CAT" control pattern. And learned the "JD" control pattern (for a past company I worked for) and find it grouped better.
Minus 5 man points Sam for not being an “excavator” controls guy
I haven’t met anyone who can run both. On slow jobs I practice the other controls
Big backhoe guy huh lmao
I pipelined for 8yrs and don’t know anyone who can run both lol
That Cat is absolutely beautiful
What a nice machine! Congrats Tavit!!!!
bobcats are hard to kill. Got a 2004 334 with 2300hrs. It’s great. Cab/heat thumb. We don’t do that work for a living but it does everything we need and more.
Cat controls all the way out here on east coast,sweet 310,our takieuchi 070 got double lift pistons and swing boom,think it's 17,500 lbs,tow with the 550 ,Reese hitch n.p,9 ton eager beaver,so glad your getting a tak
Great video and a great friend you have. It's nice when you have friends that do the same thing you do.
Lucky guy! Just picked up my cat 302 just a baby but such a nice machine!
I love the cats Just like Cody’s new cat from whistling diesel
I can run both patterns, started on JD or backhoe and learnt CAT or ISO a few years back but if I'm around anything expensive or doing finish work the ol dome goes straight back to JD lol, so I quit tryin to be cool and run both. We have a 308 mc² or whatever the designation is and it's ok for what it is, my biggest problem with it is the damn seat is so F-lappin uncomfortable and a 6' 4 ogre don't fit so great in it. I will say it's better than hand work and is pretty quick and smooth
I've been operating heavy equipment for over 35 yrs cat is tough est .307 is faster in cycles.in an out of ground then the 311. But 311 is better balanced less jerky more fluid feeling under carriage is tough.keep the walking moters behind you tracks will stretch then there goes the sprockets. Cat control's all the way. Keeps curl an stick on separate controls more digging power flows through the valve body better then same two functions on same stick . don't operate at low throttle hard on hydraulic pump. They come from cat at 70% of power turn it up to 90 it will ripp that coupler apart. They turned the pressure down on the walking motor speed to compensate. I've run from 305 all the way to 600 size the top of the tracks are 6 ft tall you got to take the bucket the tracks and the counterweight off to haul it down the road it takes three semis.my father was the best operator in this county just ask around well respected he passed couple years back. He was catapiler all the way but like d case 3 stick with swing peddles total old school... But an excavator has two levers lever a and lever b if you don't know what you're doing it's leave or b ..10/4🤠 good day boys like your channel hot rod guy too MOPAR move over power approaching rapidly
This excavator is a small excavator with the big boy power and reach. Those wide tracks 👣 and wide stance makes it awesome peace of equipment.
CAT, nice rig!
I don’t love the goofy backhoe pattern!
I don't know a whole lot about them, but that 310 looked impressive!! Look forward to seeing the other one! 8) --gary
Hey Sam does that little bobcat run off of quarters? LoL 😆
Very nice got my order shipping info. Someday one of you might make an operator.
The Takeuchi machines in my opinion are high end machines in comparison to the Cat's I had a chance to try both last fall and the Takeuchi came out on top over Crapapillar big time.
I never have got to run a new takeuchi but had a tb016 then stepped up to a tb125 takeuchi machines definitely seem to last longer then machines like bobcrap
Now that's a great machine 👍
For a split second thought this was your new machine😏
Y’all two crack me up 😂😂👍
That's a nice machine
2nd time watching Tavit today.
I'd like to see what you think of the cat with the separate aux pump for mulching. *Cat 309 or 310 I believe*
309 for mulching
@@VBELTandSON yes that be the one
I learned on a 4 stick Case backhoe and then a two sticker and when I went to an excavator I stayed with the backhoe controls. I tried the Cat controls and couldn’t get it right.
That’s a pretty nice kitty Cat !
310 is a beast but so is a TB 290
On the controls it's not really JD vs. CAT. Its more style preference. Backhoe style or excavator style for at least all the equipment I've operated so far
I wanna see it next to the 80 to see a size comparison
I want to see this too
Is it possible to install a 220 lift pump on a 19’L5P without dropping the tank and use the FASS Draw Straw and not have any Codes ??? Thank You
Idk I’ve never done that
@@VBELTandSON shoot my bad BRADDA . I messaged the wrong channel 🤦🏽♂️🤙🏾
That little Bobcat would be big enough for me... for the yard, not for making $$$.
Farmer Controls versus Man controls hahaha
what does it weigh ?
It’s a nice one! Need me one them
Like jcb controls are backwards I believe
So is the Takeuchi mini going to be your machine or are you just going to be doing a demo for now?
Mine if passes the test
Just saying, these machines run their best on about half throttle, no need to burn diesel on full gas not getting more done anyways
I don’t run them wide open never have.
Now if he had a tilt/rotator
She needs some tint
How are you going to take it to jobs. Isn’t it to heavy for your dually
I talk about it in the video. Heaviest ex that you can get that you can still tow with a dually and gooseneck.
@@VBELTandSON seen a guy towing a d6k2 with a ram, and a guy towing a 135 komatsu with an f450. If you can put 32k on trailer axles and 6k on the ball that's 38k minus 8k for empty trailer weight, equals 30k on the trailer. A lot of weight for a dually for sure but it's been done...
Didn’t you get you a new excavator
how much does that model cost?
You would need to Call your local dealer. Prices are continuously changing.
How much is the 110 new
@@robbiesmith9786 310? Not sure how. Way more with inflation
@@VBELTandSON yea 310
Surprised he didn’t go with tackeuchi TB2150
Cost double the price and ol son can’t haul it with a gooseneck
totally forgot about the weight
and everything costs about 2 arms and a leg
But the 310 does look real nice !
I want to know what you paid for it
Not sure. Have to call a dealer
You need a cat
Can u haul the 310 with your 5500?
Yes but I’d rather have a 40k trailer to do so
@@VBELTandSON what size trailer do you have now, I have a 25,500, sure that'd be pushing it.
I have a 30k and 26k I’d haul with either. Hoping to get a 40k this year. But depending on your tires and your suspension I’d haul it with a 26k
cat is fast compared to tak i have a tb370
I haven’t ran one that seems faster than the next except for the 2150. That this is fast
No tak?!
Watch video ;)