3:15 You can use the acronym “MILF”. The farther an aircrafts CG is from the Center of lift it will become: -More stable(hard to stall) -Increased stall speed -Lower Cruising speed -Favorable stall recovery. When the CG is closer to the Center of lift it is the opposite MILF, it will be more stable in the sense that it will fly straight and level on its own and also be more responsive to control surface movements
Thanks for the tutorial! I just started and got pretty good with the tech tree, but I don’t know how to make a plane! These low tech aviation parts are all I have, so this helps a lot!
I haven't played in years and recently reinstalled. I forgot so much. I had built almost this exact same aircraft, but I'm here because I forgot how to attach the engines. Watching you built it I realized I'd also forgotten how to rotate parts by keyboard. And how to set the brakes.
I don't have the same tail fin as you, it comes straight out instead of angling up, so as soon as I start trying to take off it hits the ground and the plane explodes
Check that nothing is behind the engines, I had this same issue when my vertical stabilizer was behind an engine. For some reason, jet engines just stop producing any thrust when a wing is behind it. Also make sure to push your throttle foward
Thanks for the tutorial. I'm having trouble with the key configuration. Right now e and q control my wing, so if I want to turn I have to press one of those but the plane won't move effectively (I haven't tested this plane yet, I'm talking about my own), I actually have to use the rudder. Any ideas?
Don’t know what I did wrong but my planes all just twerk down the runway then explode I’ve narrowed it down to the gear but can’t figure out how to sort it anyone got a tip?
Tell me any builds or tutorials that you would like to see in the comments
make one without dlc pls bc i don't have one of them
Let's see an SSTO/SSRT. i am an expert on the subject, and would like to see what you do.
(sorry for being 2 years late...)
how did u use the 2 side thing where it aperes on both sides
3:15 You can use the acronym “MILF”. The farther an aircrafts CG is from the Center of lift it will become:
-More stable(hard to stall)
-Increased stall speed
-Lower Cruising speed
-Favorable stall recovery.
When the CG is closer to the Center of lift it is the opposite MILF, it will be more stable in the sense that it will fly straight and level on its own and also be more responsive to control surface movements
There is one fatal flaw with the plane: the hatch is obstructed.
By moving the wings a bit in the hangar you can un-obstruct it. Just make sure the Center of lift and mass are as shown in the video. :)
You dont know how much you help me, thank you very much!
Thanks for the tutorial! I just started and got pretty good with the tech tree, but I don’t know how to make a plane! These low tech aviation parts are all I have, so this helps a lot!
thx man i was trying to build a plane to do some contracts/ collect some science on kerbin, really simple and helpful
In mine the craft aggressively shakes up and down not even lifting up yet snd in crashed
Yeah thats sucks this shit not working à fucking bug
I haven't played in years and recently reinstalled. I forgot so much. I had built almost this exact same aircraft, but I'm here because I forgot how to attach the engines. Watching you built it I realized I'd also forgotten how to rotate parts by keyboard. And how to set the brakes.
never did a proper landing before i watched this video, thanks
Thx bro you help me a lot
Glad it helped
thank you i’ve always wanted to learn maybe this can give me tips
thanks a million
also if i dont put engines and launch it via another plane will it work as a glider?
Its possible but you will have to adjust the wings for the change in center of mass.
Literally built the same plane but mine wobbles at 60m/s and crashes before lift off.
try turning on/off SAS and it might work. Hope this helps!
Also try pulling up a little earlier if that doesn't work
Glad Im not the only one struggling to make the base parts or any tiny plane for that matter that flys?
Are your back wheels close/behind your center of gravity? Or slightly bent at the wrong angle?
Runway. Was my problem. Upgrade it or go on the grass.
Thank u very much good sir for awhile I couldn’t build a plane that could take off it would veer to the left or right and crash
very good video man. This is how tutorials should be!
I don't have the same tail fin as you, it comes straight out instead of angling up, so as soon as I start trying to take off it hits the ground and the plane explodes
Good tutorial but once I stage I barley even move and my brakes are off
Check that nothing is behind the engines, I had this same issue when my vertical stabilizer was behind an engine. For some reason, jet engines just stop producing any thrust when a wing is behind it. Also make sure to push your throttle foward
At 6:09 , there is a typo, it says: Stap 3: turn on your brakes
Mistake lol
for some reason i cannot pull up, i can pull down but not up, COG and aerodynamics are on an equal level so i dont know what it could be
Very helpful man
Bru, thanks you !
DUDE. SLOW DOWN WHEN SELECTING PARTS.
me,who built one all on my own using a rocket engine,but it can barely get off the runway and can barely turn
Thanks for the tutorial. I'm having trouble with the key configuration. Right now e and q control my wing, so if I want to turn I have to press one of those but the plane won't move effectively (I haven't tested this plane yet, I'm talking about my own), I actually have to use the rudder. Any ideas?
it could probably help u to disable all the other movements in your control surfaces, only leave one active in each kind
built the same, but im holding s and even at 90 m/s it doesnt lift up. it only lifts up when i exit the runway. how do i fix this? its really annoying
My plane is stuck at a really low speed, and I can’t figure out why
Thanks very much !!!
How do I attach the elevon on the wing? It seems impossible, even when I try from all angles.
How can I have two wings on one click?
Bottom of the screen there is a mirror mode that will let you add 2 wings
Nezt time you ever do this could u pls just show the controls idk how to get the wjngs in
Idk why but when i start the engines and it is at full throttle and i can literally hear the engines working it isnt moving at all
How can you get your elevons to level with the wings?
I built as shown but when I took off everything was fine then I had trouble steering and then my speed started dropping help please :)
My plane does not work at all it steers to the right and i cant find a way to fix it
Make sure everything is aligned evenly and it may also help to disable come control surface settings like yaw on the ailerons
@@ThatOneKSPerdid that and it still steers as soon as I start moving
thx
let me try this in real life
The center of lift is not the same as his even though I did the exact same thing as him I am just wondering if it’s just me
that stupid plane keep going to the left
but how do you flip a plane upside down
Don’t know what I did wrong but my planes all just twerk down the runway then explode I’ve narrowed it down to the gear but can’t figure out how to sort it anyone got a tip?
Try attaching the main gear to the wings for a wider more stable wheelbase
what do i set for yaw pitch and roll, does yaw go on the back top tail fin or on the back sides, what about pitch?
Doesn’t work. I can’t go 10 feet without it turning and crashing
check your center of mass and center of lift. make sure the center of lift is behind center of mass
For some reason I cant get some parts dead in the center and the parts have to be to one side
Make sure you use mirrored mode and in the hangar :) Hope this helps!
If you still cant get it try using fine tuning tools in the top left of the build screen.
@@ThatOneKSPer Thank you that worked
How did you grab two wings?
You can place 2 wings by using mirror mode, which is activated in the bottom left
@@ThatOneKSPer aaah thxx
@@Mshorts_Bka No problem!
thanks
i dont understand how u placed the flaps like that🤔
Mix of W A S D keys and too many hours on the game lol
I cant move the wings to the back
Make sure you are in the "offset" tab and check to se if it says absolute under it.
btw wdym Stap 3 at 6:07
Guess I misspelled step 3 lol
My first plane is much bigger and has a LOT of airbrakes
bro i cant throttle up
Make sure you staged 1st or else throttle won’t have any effect
Why does this stuff never work for me 👽
Good plane, 1 small issue.
After i click W to go up the plane goes right and losts 1 wing and then crushes everything.
I can't land it. I have trouble lining up the runway.
First make sure the center of gravity and lift are as they show in the video, but if you still have trouble after that its all about practice. :)
@@ThatOneKSPer I have my own channel and I recently built a plane to learn how to fly. And eventually I got it.
@@scottwilliams846 Awesome!!
I hate this game
🤣