Nice job making the Jenna game! I especially like the carry case that you made, and the explanation of the proper width / length for the individual pieces.....
kick back is nasty have had lots with a chainsaw ,good job like the box so now im going to build one i have a stick boy version of janga mabe i make vidio too
Yeah, there was a lot i did wrong there but I have learned a ton since then like the proper way to make that cut. Making a video is a lot of fun. Would like to see what you come up with!
Hello, enjoyed your video very well done. I was curious if your wife remembers where she bought the stencils. I’m sure I can find them but would love to get the same ones because they seem to work so efficiently. Again, very well done video I love how your family is all involved.
Great video man thanks. That kickback could have been prevented by pushing on the work piece side instead of the “cut off “ or waste side. 😭. Glad no one got hurt tho man. That’s always a good thing.
I used 2×3s and I don't remember how many. I just did the math. Each piece is 7.5 in. long. And a 2x3 typically comes in 8 ft or 96 inches. You also want to also want to allow for waste so get at least one extra.
The lack of a riving knife or splitter in this case was NOT the issue. you would have had no ejection, or kickback, at all IF you had used a push stick/block on the piece between the blade and fence... like any experienced table saw user would KNOW!
You are, of course, absolutely right. You should always use a push stick or push block to keep the work piece against the fence. I have learned this with experience and tips from all of you.
Pretty cool project I think I’ll make one for the grandkids. Yeah I’m with you on that he had to go to Texas sure what I heard you say?Maybe I’m just hearing things Also. I think you’re lucky though at least your wife works with you Without really complain. All right y’all have a great day thanks for the video
@@ifscottcanyoucan Your editing is great. I have a hearing condition (misophonia) so that I cannot tolerate most banging and clanging, and clicking sounds and it prevents me from watching most videos. I have used CC, but most often the CC is too fast or the words are to small for me to follow.
@@ifscottcanyoucan Yeah when the wife said she didn’t want to be known as your wife until your TH-cam channel was successful I looked down and I was like oh that’s pretty decent 266K and then I realized... good luck on it. Youll get there! Do a colaboration with other youtubers for promotion
Great video. Helpful and fun to watch.
Seeing you with your wife made me smile. Thanks for sharing.
I heard the beep! Lol Your wife is hilarious! Thank you for the video!
Glad you liked it!
Nice job making the Jenna game! I especially like the carry case that you made, and the explanation of the proper width / length for the individual pieces.....
Thanks. I do what I can.
I have the same Leatherman tool. Thank you for your service.
Thanks for your support. I love my Leatherman Wave.
Thanks Scott it was very informative I will be trying this project with my husbands and old boys
Thanks for making a simple and fun to watch video. Glad you got out of the way of the kickback! Also nice to see your family involved. 👍
Thanks. I'm glad too!
Great editing Scott, you're a natural at this. Love the kickback graphics.
Thanks! It's a learning process.
When I made mine a few years ago, I painted them lightly and put paste wax on them. Yes, it was time-consuming.
Worth it I'm sure.
Enjoyed your video my man. I wish my wife were willing to give it a try.
Ask her to help on your next project. Make it fun! It's a great way to spend time together.
Thank you for your service!
Much appreciated.
I’m loving the paint can
WHAT EVER IT TAKES BIG DADDY
Good job friend
Thanks!
Nice reaction time on that kickback!
Thanks! Not so much on this reply.
kick back is nasty have had lots with a chainsaw ,good job like the box so now im going to build one i have a stick boy version of janga mabe i make vidio too
Yeah, there was a lot i did wrong there but I have learned a ton since then like the proper way to make that cut. Making a video is a lot of fun. Would like to see what you come up with!
Good job!
Thanks
Nice vid Scott
Thanks
Hello, enjoyed your video very well done. I was curious if your wife remembers where she bought the stencils. I’m sure I can find them but would love to get the same ones because they seem to work so efficiently. Again, very well done video I love how your family is all involved.
I am sorry I didn't get back to you sooner. She got them at Hobby Lobby.
New subscriber just because I've lost it too
Great video man thanks. That kickback could have been prevented by pushing on the work piece side instead of the “cut off “ or waste side. 😭. Glad no one got hurt tho man. That’s always a good thing.
I have learned a lot about tablesaw safety since then. Hasn't happened since. Thanks for watching!
Of course you can always use a board stretcher
They were all out at Lowe's.
I heard the beep.....it is very real. Could it be the telescope screaming for relief from the sawdust?
Lol, maybe!
That's quite a project but I'm sure the video editing took a long time. I just wing it. Soon I will get the Vegas Movie Studio installed.
Thanks. Yeah, that one took a while. I feel like I'm getting slightly better with each video I edit. I use Filmora.
That looks fun !!
It was fun to make and play.
Well done!
Thanks Mom!
Rooting for Desire!
She is always the smart bet!
How many 2x4s do I need
Thank you!
You're welcome 😊
Liking the videos Mr. Bean
Thanks bud!
💚💚💚
How many 2×4 did you use?
I used 2×3s and I don't remember how many. I just did the math. Each piece is 7.5 in. long. And a 2x3 typically comes in 8 ft or 96 inches. You also want to also want to allow for waste so get at least one extra.
VEERRRRR VERRRRR VERRRRRR. And I’m that piece of wood you threw at that camera.
Lol, thanks cuz!
I'm #400 sub yeah!
Thank you!!!
I really enjoyed the part where you couldn't figure out the sound in the shop
To this day I have no idea what it was
i herd the beep too
what wood?
Off the shelf 1×3 pine.
You never said if they were 2x4 or 2x3's.
They are 2x3s.
The lack of a riving knife or splitter in this case was NOT the issue. you would have had no ejection, or kickback, at all IF you had used a push stick/block on the piece between the blade and fence... like any experienced table saw user would KNOW!
You are, of course, absolutely right. You should always use a push stick or push block to keep the work piece against the fence. I have learned this with experience and tips from all of you.
Do you have the dimensions for the box?
The inside dimensions are 17 1/4 ×12 1/2. Its 7 1/2 deep.
👏 👍
Lol not until your TH-cam is goos.
....0:52...I hear the bip...
Thank you! I never did figure out what it was.
Pretty cool project I think I’ll make one for the grandkids. Yeah I’m with you on that he had to go to Texas sure what I heard you say?Maybe I’m just hearing things Also. I think you’re lucky though at least your wife works with you Without really complain. All right y’all have a great day thanks for the video
Good video, great humor, except for that annoying "hold" background noise. It's not necessary and adds nothing to the video.
Thank you for your feedback. I'm still trying to get the hang of the editing process.
@@ifscottcanyoucan Your editing is great. I have a hearing condition (misophonia) so that I cannot tolerate most banging and clanging, and clicking sounds and it prevents me from watching most videos. I have used CC, but most often the CC is too fast or the words are to small for me to follow.
266,000 subs, nope haha.
I'm working on it! 😆
@@ifscottcanyoucan Yeah when the wife said she didn’t want to be known as your wife until your TH-cam channel was successful I looked down and I was like oh that’s pretty decent 266K and then I realized... good luck on it. Youll get there! Do a colaboration with other youtubers for promotion
Your silly