(1181) Challenge: Devious Crossways Pin

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ธ.ค. 2024

ความคิดเห็น • 55

  • @heresthedealboys
    @heresthedealboys 7 ปีที่แล้ว +7

    I've learned a lot from watching your videos, I used to just rake everything, now I find that its much more fun to SPP locks now.
    Just wanted to say thanks.

  • @martyhastings9347
    @martyhastings9347 7 ปีที่แล้ว +2

    looks like a whole lot of work went into that lock. what a great pic on a great lock. thanks for sharing. this video was very much appreciated. thanks.

  • @send9
    @send9 7 ปีที่แล้ว +2

    Really cool to see constant challenge lock innovation. Great picking as always!

  • @Nathan-gh8tx
    @Nathan-gh8tx 7 ปีที่แล้ว +1

    So much skill on the part of the lock pinner AND the picker.

  • @jeffreyreindeer5351
    @jeffreyreindeer5351 7 ปีที่แล้ว +2

    Wow. Great job, way to thing outside of the box on that one!

  • @michaelking3327
    @michaelking3327 7 ปีที่แล้ว +13

    bill, your camera is trying to focus on the green mat because of all the lines, try laying a dark colored material down before disassembling the lock. as a bonus the material will keep loose pins from bouncing as much when they fall and the dark material will make everything easier to see.

  • @larryg7336
    @larryg7336 7 ปีที่แล้ว +1

    Wow GREAT pinning, lot of work. Mr.Bill great pick to

  • @pjdambra
    @pjdambra 7 ปีที่แล้ว

    Congratulations Bill for picking that ingenious design. That rubber "Spring" worked pretty well but I'm sure that's the weakness in the design. Awesome design Scott.. Patient It.

  • @sarnold1277
    @sarnold1277 7 ปีที่แล้ว +1

    Great lock! Great pick!!!!

  • @robb.c.7407
    @robb.c.7407 7 ปีที่แล้ว +34

    7:50 Focus You Fack lol

    • @OliverKnittel
      @OliverKnittel 7 ปีที่แล้ว +5

      if it ain´t chooch you gotta cuss your cunninglinguus at it, or pet a beaver, preferably.

    • @disgruntled181
      @disgruntled181 7 ปีที่แล้ว +5

      Keep your lock in a vise!

    • @justinbell5696
      @justinbell5696 7 ปีที่แล้ว +6

      I swear every channel I watch has people using AVE lingo in the comments.

    • @MrStonedOne
      @MrStonedOne 7 ปีที่แล้ว +4

      I'm a simple guy. I see ave meme, i upvote.

    • @lockcracker
      @lockcracker 7 ปีที่แล้ว +1

      Skookum

  • @jamesmurphy8014
    @jamesmurphy8014 7 ปีที่แล้ว +1

    Great pick!

  • @josuelservin2409
    @josuelservin2409 7 ปีที่แล้ว +1

    Wonderful lock and beautiful picking.

  • @Ikeduro
    @Ikeduro 7 ปีที่แล้ว +4

    The spring in #2 looks like a spring from a lighter. That flat piece in it could've been what held the flint in position.

  • @72cmcinc
    @72cmcinc 7 ปีที่แล้ว +1

    Great pick on that alien technology!

  • @Ea-Nasir_Copper_Co
    @Ea-Nasir_Copper_Co 5 ปีที่แล้ว +2

    1536 AD! You got Henry VIII's lock!

  • @skygh
    @skygh 7 ปีที่แล้ว +1

    Yup that is devious! But Bill won anyways. Scared of you Bill.

  • @jellybean7253
    @jellybean7253 7 ปีที่แล้ว +1

    I don't usually comment, but, that was FANTASTIC fun! Great job to both of you.

  • @zedorda1337
    @zedorda1337 6 ปีที่แล้ว +3

    Zippo lighters have a spring to push the flint into the wheel and has a small T pin retained at one end.

  • @rampagedeluxxe3078
    @rampagedeluxxe3078 7 ปีที่แล้ว +1

    4th...Great skill, always wanted to learn, so why not watch it in action, great videos

    • @Komier09
      @Komier09 7 ปีที่แล้ว +1

      Buy a starter kit and a couple locks for cheap. It's very easy to get into, and very hard to master, which makes it a fun hobby. Bill has some videos recommending various products for beginners.

  • @RMoribayashi
    @RMoribayashi 7 ปีที่แล้ว +1

    The man thinks like a magician. All the fancy security pins were just misdirection to keep you from figuring out the secret locking pin in the back. If it had just been the standard factory pins it would have been obvious from the start there was something alien about the lock.

  • @darthpaul123
    @darthpaul123 7 ปีที่แล้ว +1

    Did you try to stack the pins from chamber 2 into the core to see? If that driver is long enough it isn't necessarily going to make a second sheer line.

  • @stickinthemud23
    @stickinthemud23 5 ปีที่แล้ว +3

    I wish we didn't have to give up the video when scrolling through the comments. C'mon, TH-cam!

  •  7 ปีที่แล้ว

    Really nice. And nice picking as well. Good job both if you.

  • @matthewnardin7304
    @matthewnardin7304 7 ปีที่แล้ว +1

    That notch on the backside of the core looks like it was cut to prevent pins from falling into the c-clip groove.

    • @darmstrong944
      @darmstrong944 7 ปีที่แล้ว +1

      You are correct, my brother made this lock.

  • @thelockpickinglebowski633
    @thelockpickinglebowski633 7 ปีที่แล้ว +1

    Lotta ins, lotta outs, lotta what-have-yous...yet less than 4 minutes to open it.

  • @DonzLockz
    @DonzLockz 7 ปีที่แล้ว

    Clever idea and a quite interesting lock. Got you stumped for a while. Nice!🍺✌

  • @RockApe8252
    @RockApe8252 7 ปีที่แล้ว +1

    Chamber 4. The pin was magnetic. The lower T pin was iron/steel. They would have tried to stay together inside of both outer/drilled drivers.

  • @Ben-tz9sm
    @Ben-tz9sm 7 ปีที่แล้ว +2

    Was that bar a bearing out of a u joint?

  • @Bushcraft-xz6xd
    @Bushcraft-xz6xd 7 ปีที่แล้ว

    Would the addition of a metal slot on the outside of the lock inline with the keyway, say half an inch long foil picking? I see you with picks coming out the keyway at extreme angles to try to get the pins to move. A short metal slot would block this action for very little money and add extra pick protection?

  • @Pyrolock
    @Pyrolock 7 ปีที่แล้ว +1

    Nasty Lock

  • @lukabogdanovich6986
    @lukabogdanovich6986 7 ปีที่แล้ว +7

    Hey Bill kind of off-topic I sent you a master lock that appeared to be sealed in its original package but it actually was not I've re-sealed it wondering if you've gotten it and messed with it hope you enjoy thanks

    • @bosnianbill
      @bosnianbill  6 ปีที่แล้ว +2

      Luka, sorry for the delayed response but I wasn't notified of this message and just stumbled across it. If it was in the original package I probably just repackaged it and sent it to a new picker. I sincerely HOPE it was repinned with something so crazy that we discouraged a new picker....🙄

  • @TrikeRoadPoet
    @TrikeRoadPoet 7 ปีที่แล้ว +1

    Isn't it wonderful what complexity the human mind can conceive of when off the medication!

  • @grahampearson947
    @grahampearson947 2 ปีที่แล้ว

    Is that from Deviant Ollum, Bill?

  • @dsloop3907
    @dsloop3907 7 ปีที่แล้ว

    @1:09-- LETS JUST MAKE SURE IT WORKS!!!!!!
    @1:15-- of course it does........

  • @jamesdowney854
    @jamesdowney854 7 ปีที่แล้ว +1

    Number 2 pin looks like a (dreidel pin)??????? Something new all the time...

  • @RMoribayashi
    @RMoribayashi 7 ปีที่แล้ว +9

    Bill, have you applied for a verification badge for your channel? You are way over the minimum 100k subs requirement.

    • @rileyfenley522
      @rileyfenley522 7 ปีที่แล้ว +3

      RMoribayashi i wonder if he’s gotten his silver play button as well. I don’t remember

  • @simeyD
    @simeyD 7 ปีที่แล้ว

    love your vids mate!!!.

  • @michaelhealey4244
    @michaelhealey4244 7 ปีที่แล้ว

    Hey bill just wanted to add to what thousands of others have said already love watching your videos ive watched so many and lernt so much I just wanted to say thank you I'm still a begginer but got into lockpicking as a hobby because my wife is over paranoid and thinks there MUST be something of hers behind every lock and steals my keys all the time and swears I must have lost them but after countless hours of searching for keys and watching your videos I've been able to pick I'd say 20 or so china and master locks from my homemade pick out of a case xx knife spine and a file but I can't seem to get passed my key retaining 5200 american and since I dont have any debit or credit cards I'm limited on buying anything online and dont have very many power tools to make any myself not to mention it takes forever to file down a windshield wiper blade even after annuling it I would love to make a triple peak or a snake pick but not sure I have the the fingers or patience to make one any suggestions would be greatly appreciated sorry to post a long comment on your video but I couldnt find a email address for you anywhere and didnt want to send it to the lock lab for everyone to read so id decided to let everyone on youtube read it lol once again thank you for all of your videos they have saved my ass alot of times mabey one day I can find and enroll in a lock smithing school if I can find one somewere but its such a hush hush thing I've never even herd of one sincerely your apprentice Michael Healey you can reach me at mikenbecca4eva@gmail.com thank you once again for your videos I laugh when I here someone voice in a wrong video and say wait a min thats not bill no wonder its taking them so long lol

  • @milo-uy6rd
    @milo-uy6rd 7 ปีที่แล้ว +1

    I’ve made a lock id like to send you it’s got great potential it’s a 10 pin but! It’s not like ive ever seen before it’s homemade and I want to send it in as a challenge lock what are the rules for the challenge locks? It has a working key it’s pickable but not normal. I also would like it back but it would be great with some alien tech. I would pay for shipping for it to come back to me.

    • @bosnianbill
      @bosnianbill  7 ปีที่แล้ว +1

      Sure Milo, I'd love to take a look at your invention! The address is:
      LockLab
      P.O. Box 2160
      Merrifield, VA 22116 USA
      Thanks! bill

    • @milo-uy6rd
      @milo-uy6rd 7 ปีที่แล้ว +1

      bosnianbill for getting the lock back after I send it In should I include money in the package? Or via online payment?

  • @benjybooth2840
    @benjybooth2840 7 ปีที่แล้ว

    Cool

  • @robertsistrunk6631
    @robertsistrunk6631 7 ปีที่แล้ว

    Aluminium body 3 pound hammer problem solved