Jazak Allah... Thank you so much.... Ap jese teachers jab tak is duniya main mojod hay students kabhi b fail nahi ho skty.... Thank you so much... Har cheez bht e detail m btayi uay aapny sir....
Assalamualaikum Dr. Laghari. It's a nice video, and it would be great if you could briefly explain why the branch power flow shows negative values. For example, the reactive power flow from bus 2 to 3 is -43.20 MVAR, but the real power is positive 65.59 MW. How is the power balance equation satisfied at bus 2? Please let us know. Thanks.
Wa'alaikum salam thanks for the compliments and comment. Yes. Negative is there in reactive power values. I am not sure it may be due to software issue or connection issue. I will check it again and if there is any solution I will share it.
@@ektaray6446 in that case, I think it may not be helpful. Because, all algorithms depends upon the iterations, overall answer of all the algorithms remains same.
Thanks for your message. Yes you are right. I have not selected the gauss seidel method in the video. But by default it gives the accurate results using load flow method.
Jazak Allah... Thank you so much.... Ap jese teachers jab tak is duniya main mojod hay students kabhi b fail nahi ho skty.... Thank you so much... Har cheez bht e detail m btayi uay aapny sir....
Thank you so much for the compliments. Stay blessed
I have no word sir seriously mashaa Allah what a efforts and main thing, the way you think great sir
Thank you for the compliments.
I'm from morocco. thank you very much Mr. Laghari for this course
Thank you so much for the compliments.
Ma sha Allah Very Informative Video
Thanks for the compliments.
Great work done sir.
Please what is the explanation for the percentages shown by the pie chart?
Thanks for the compliments. The percentage of pie charts shows the overloading of the transformer.
Great Effort Sir..
Thanks
Thanks aaloooot bro. May Allah bless you
Thanks for the compliments.
Thankyou Sir that was very fruit full vedio to learn ❤️
Thanks for the compliments.
excellent work sir ! ❤❤❤
Thanks
MashaAllah Sir
Thank you Very Much Sir
Thanks for the compliments.
Jazak Allah Sir.
My pleasure
Excellent and very helpful sir.
Thank you.
Thanks for the compliments.
Thanks you very much. How can carry out reliability indices on power world simulator?
Thanks for the compliments. Kindly see the book power system analysis and design by glover. You may find some information
Assalamualaikum Dr. Laghari. It's a nice video, and it would be great if you could briefly explain why the branch power flow shows negative values. For example, the reactive power flow from bus 2 to 3 is -43.20 MVAR, but the real power is positive 65.59 MW. How is the power balance equation satisfied at bus 2? Please let us know. Thanks.
Wa'alaikum salam thanks for the compliments and comment. Yes. Negative is there in reactive power values. I am not sure it may be due to software issue or connection issue. I will check it again and if there is any solution I will share it.
excellent sir.thankyou very much for the video sir.
only gauss seidel method or any other methods can be done in this software sir??
Thanks for the compliments. Other methods can also be used.
MahsaAllah, Thank You Sir 😊
Thanks for the compliments.
Can we change the solution method to Newton Raphson or Fast decoupled methods ?
Thanks for the comment. You may go to solution details, yoy may find option for Newton raphson method i think.
Thankអរគុណ❤
Thanks
Sir,Ur screen shows u have selected single solution-newton raphson method instead of gauss siedel. So can u guide how to select gauss siedel method?
Thanks for the comment. Basically aim was to show the exact solution of Load Flow Analysis. You may select the gauss seidel from the toolbar.
@@DrJALAGHARI sir in the software, by default newton raphson method is selected and I am unable to change to any other method like gauss seidel.
@@ektaray6446 ok i will check it and again let you know. But does it matter type of Load Flow?
@@DrJALAGHARI sir i want to analyse the result using different methods.. That is why I want to use gauss seidel and fast decoupled method also.
@@ektaray6446 in that case, I think it may not be helpful. Because, all algorithms depends upon the iterations, overall answer of all the algorithms remains same.
Hi sir, if we need to add excitation and power system stabilizer for load flow analysis with NR and F.decoupled method. What we need to do ?>
Thanks for the comment. First try to find such example in order to be able to match the results.
Really very Useful
Thanks for the compliments.
Excelente profesor
Thanks for the compliments.do share it within your circle.
How to draw the simulink circuit for smib and multimachine stability using swing curve any suggestion either any Matlab code
Thanks for the comment. I think you may seqrch it on matlab central file exchange. May be it is available there.
very helpful. Thanks.
Thanks for the compliments.
Salam Dr, how do we check on no of iteration to solve the given problem?
I think this may not be possible. because it is simulation. no of iterations may be possible in matlab program.
Hi.. is there a load flow analysis on 7 bus system
The procedure is same. If you have the data you can follow the steps to model the system
At what moment, do you select Gaus-Siedel method there, I couldnt find that, sir
Thanks for your message. Yes you are right. I have not selected the gauss seidel method in the video. But by default it gives the accurate results using load flow method.
Sir, How use ACO technic by using power world simulator
In free version it is not possible. However, in the latest versions, it may be performed by interfacing.
Thank you for reply sir, pls provide a video on latest version
are these videos are shown in the playlist serially ?
Thanks for the comment. No. They are placed arbitrarily.
the pu voltage of the slack bus returns always at 1 pu despite I changed him, why?
Thanks for the comment. In edit mode, double click on generator and put setpoint voltage to 1.05 per unit then it will not change.
Hello there
I don't have any idea from where I can get the setup.
You just send me your email. I will send it to you.
@@DrJALAGHARI thank you so much
my email ID:abbasiahmed365@gmail.com
@@DrJALAGHARI My email id is... uhkg123@gmail.com
kindly send me also.
Dear Sir u are doing very well👌👌👍
Dear Professor, Can you pls help me how to download and install Power world simulator software
Watch this video and follow the steps for successful installation.
sir, can you provide me ieee14 bus load flow???
Thanks for the comment. I am sorry I haven't modelled this IEEE 14 bus system. You may search it on google. Maybe you find.
Nice sir
Thanks for the compliments.
thanks
Welcome
SIR PLEASE CAN YOU HELP ME
SIR HOW CAN I DO THE MATHEMATICAL EQUATIONS SIR CAN YOU SOLVE THIS EQUATION MATHEMATICALY PLEASE SIR HELP ME
Thanks for the comment. Which Equation. This example is taken from the book power system analysis by hadi sadat.
SIR, COULD YOU PLEASE PROVIDE POWER WORLD SIMULATOR A SOFTWARE LINK SIR
Send email to jalaghari1@gmail.com it will be sent to you.
@@DrJALAGHARI ok sir just now I sent sir
Süleyman hocadan gelenler like'a aban
Thanks for the compliments.
tried running something similar but kept saying system blackout
Thanks for your message. It should work. If you still face the same issue. just email to jalaghari1@gmail.com, it will be sent to you.