No, you can’t adjust any collimation. However, when I put it in front of a different scope, that variance went away. I’m going to do some testing with Optics down the road.
Thanks brother. I had them open it to an M24 contour so anything would fit. I believe this particular barrel is the Bartlein #13 or #4. Thanks for watching!
It’s collimated. I’ve not had any issues whatsoever. With the focal knob being on the rear of the unit, it seems to lock in really well. I’ve tried it on multiple rifles, multiple scopes, and haven’t had any shift from my daytime optic.
I bought a 1.5” Sphur for mine but my chassis bridge makes the ELR stand a little taller from center of my day scope so I’m looking for alternative options.
@@brandtank8174 great question. If I had to summarize in this most simplistic of terms, the size is much smaller on the Mk2. But the bigger piece is the focal knob-being back towards the shooter is easier to get at. There’s also an element since the focal knob is on the front lens of the MK1 there have been some reported issues of collimation challenges. I can tell you with my Mk2 I’ve not had a single issue on any rifle I’ve put it on, despite scopes variance/ height variance ….none of that has mattered. Both are good but the Mk2 definitely has some advantages. Lastly, the mark two can also be used as a stand alone thermal optic …the mark one cannot.
Preston & Joe are a couple of the good guys from my experience as well
Hitting 1 moa in the daytime is insane....let alone through a thermal. WOW! Just wow!!!
You are the best best guy
Man am I jealous!!!
The capability this gives about 10-12x is insane.
Can you adjust the unit to zero it to eliminate that .4 shift you had?
No, you can’t adjust any collimation. However, when I put it in front of a different scope, that variance went away. I’m going to do some testing with Optics down the road.
We need to shoot soon bro. I'm poor and only have the xrf but I can make it work lol. Love your videos buddy keep it up!
Anytime brother! XRF is still big time too!!
Bad ass rig!
what barrel Chanel you running on your Manners? Is that a sendero contour barrel?
Thanks brother. I had them open it to an M24 contour so anything would fit. I believe this particular barrel is the Bartlein #13 or #4. Thanks for watching!
Great video. Do you need to zero it of is it collated??
It’s collimated. I’ve not had any issues whatsoever. With the focal knob being on the rear of the unit, it seems to lock in really well. I’ve tried it on multiple rifles, multiple scopes, and haven’t had any shift from my daytime optic.
Very very impressive
Does the raptor LRF connect via cable for internal DOPE ?
No, not on this unit. It does on the Pixels on Target Voodoo M.
What scope mount do you have on your Zcomp?
Those were the Hawkins rings
I bought a 1.5” Sphur for mine but my chassis bridge makes the ELR stand a little taller from center of my day scope so I’m looking for alternative options.
Have you tried contacting the chassis manufacturer asking him why you have that offset and if they make a rail that can accommodate for that?
No, I haven’t yet with the holidays going on. It’s an XLR chassis.
High humidity? That doesn't cut it, what was the humidity?
Well, it was raining at various points through my shooting. So high.
@@longrangeprecisionshooters8935 be good to see with low humidity
mk 1 vs mk 2 whats the difference? and is it worth going to mk 2 vs mk1 ?
@@brandtank8174 great question. If I had to summarize in this most simplistic of terms, the size is much smaller on the Mk2. But the bigger piece is the focal knob-being back towards the shooter is easier to get at. There’s also an element since the focal knob is on the front lens of the MK1 there have been some reported issues of collimation challenges. I can tell you with my Mk2 I’ve not had a single issue on any rifle I’ve put it on, despite scopes variance/ height variance ….none of that has mattered. Both are good but the Mk2 definitely has some advantages. Lastly, the mark two can also be used as a stand alone thermal optic …the mark one cannot.
What does this unit cost?
$16,500.....the mod 1 now is selling for around 11,500 used
that's a $16,000+ scope.... just say they sent it to you, you don't have to lie and make it look like you bought it.
You want to see the receipt, homie?!? There’s only 35 of these in the US currently, they aren’t “sending them out” for people to use.
@@longrangeprecisionshooters8935 Sure thing bub.