I have an assignment due in 3 hours and I was losing my mind wondering how I could create a box girder with a variable depth. Thankfully, I stumbled upon this. Thank you so much.
@@DenariPixel Please I have a challenge. When I load the family to my project, I can not seem to set the beam's host to a reference place in my project. I am only able to set it's host to a level. My Bridge has a Profile grade, so the beam has to be on a slope.
@DenariAnalytics it turned out my reference lines weren't correct, i fixed it, thank you so much for this video it helped me too much i hope you continue making revit videos for us ❤️
Hi bro, I dont know how to make the beam you modeled to behave like a truss beam. I am saying that because i have to model a similar truss beam and export it from revit to a fem model. Thank you for sharing your knowledge
Thank you for your question. That line is a ‘course line’. In plan view on drawings, we like to show beams as lines, rather than 3d elements. We later change the line to be visible in ‘course’ mode only. And make the 3D elements only available in ‘fine’ mode. I hope that helps
![จบจนได้ ! | Black Myth: Wukong #007 [ตอนจบ?]](http://i.ytimg.com/vi/DSqvWndF0sw/mqdefault.jpg)
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
This is exactly what I m lookin for.. lots of thanks to you
Thanks for watching
Thank you sir. 2 days searching youtube, finally, i found what i need for my project.
I have an assignment due in 3 hours and I was losing my mind wondering how I could create a box girder with a variable depth. Thankfully, I stumbled upon this. Thank you so much.
I’m glad it helped
@@DenariPixel Please I have a challenge. When I load the family to my project, I can not seem to set the beam's host to a reference place in my project. I am only able to set it's host to a level. My Bridge has a Profile grade, so the beam has to be on a slope.
Never mind. I got this sorted out. Thanks
Thanks mate! You just saved my life!
No problem mate. I’m glad it helped
man you have very good tutorials, i have watch a few and they are great! please keep making videos like this!!!
Thank you for the support. Please subscribe to my other channel also: th-cam.com/channels/nr-9IFwsRq7yLKBXzn7yVw.html
Thank you so much, but why i can't load this family in to my project now
What happens when you try and load it in?
@DenariAnalytics it turned out my reference lines weren't correct, i fixed it, thank you so much for this video it helped me too much i hope you continue making revit videos for us ❤️
nice, thanks a lot
Thanks for watching
Hi bro,
I dont know how to make the beam you modeled to behave like a truss beam. I am saying that because i have to model a similar truss beam and export it from revit to a fem model.
Thank you for sharing your knowledge
Sorry for the late reply. I don’t think rebut is good for modelling adaptive trusses. Also, what’s an fem model?
28:05 why did we create that line and aligned it and locked it? why is it important tho?
Thank you for your question. That line is a ‘course line’. In plan view on drawings, we like to show beams as lines, rather than 3d elements. We later change the line to be visible in ‘course’ mode only. And make the 3D elements only available in ‘fine’ mode. I hope that helps
@@DenariPixel Thank you very much. it was very helpful. eagerly waiting for your next detailed video.
Thanks for your support
how can i do the stitches ?
Stitches?
most irritation youtube video
make your own then