that's super relatable lol... every time I start to assemble a project, I genuinely get surprised when it goes together well and looks good right off the bat
.....as I've said before, TIP TOP VIDEO.!!! A vast number of youtubers could learn a lot by watching your videos. Straight forward. No unnecessary faff. And no playing to the gallery. You are on my short list of natural matter-of-fact presenters. .....oh and by the way , the content is always relevant and therefore interesting.
Tamar, I never thought of women as being great at wood woking. Im new to wood working so I don't know much, Im learning through TH-cam. Watching and listening to you is very inspirational. You use intelligence in every project you put on TH-cam.i hope one day to be as good as you and many of the other wood workers I see on TH-cam.
I just wanted to say, out of all the woodworking channels, yours is by far the most creative, you make jigs and projects that mostly have never been done before on youtube, and really get me in the spirit to just go to the shop and make stuff! Great job!
There R many videos out there on how to make this jig but none of them explained so well the simple details the way you did it Tamar. Well done, you're the one. Keep doing this. Lov your work.
Thanks so much for sharing. I'm addicted to jigs and have made a few for my table saw, bandsaw, drill press and lathe, specially for pen making. I recently made a couple chairs and was trying to make a dowel jig and found your video and must say this is the best instructional video on this jig. Thanks for sharing.
This channel has some of my favorite woodworking project. I can't wait to be done with my remodel so I can get my shop setup and make some of this stuff!
Hey Tamar, thanks for making this available to us all. I just realized after going to Lowe’s to purchase the steel bushing for the center hole, purchase a second bushing with 3/8 outside diameter and 1/4 inside diameter. Then your dowel jig works perfectly with both 3/8 and 1/4” dowels, same jig, just ad a smaller bushing. I too will likely only use 3/8” dowels but I thought I share! The bushings were in the hardware isle.
Thank you so much for this! I was evaluating jigs that seem overly expensive (at least for my budget) and this jig seems so much better - not even including the satisfaction of making the jig. My search for a dowel jig ends here - this is exactly what I will do!
your channel is my dream, it moves towards joinery and cabinetry. and innovation, and independence. and you’re female, which is inspiring and empowering for me. mostly i am just amazed at your clamps that dont require screwing, just a knock of the hammer... magic! but your jig blows my mind, the spatial reasoning involved in designing these things is kinda crazy cool.
Thank you for making these videos. I am so impressed with your skills and knowledge. You are at the top of your craft, you still work to get better, and you teach others how to improve their skills. I tip my hat to you.
The jig you based off of is the jig I do have. I have only used it on one project. I had one are where things just did not line up. There was no issue with the jig, it was my error of how I lined up my boards. I drilled the board facing the wrong way. That is one thing you have to do is be mindful of your board orientation. I fixed by switching to pocket holes. It was my first project with the jig, and I learned from my mistakes. Yes the jig is plastic and if does wear out or break, I now have a source to know how to make a replacement jig. Thank you for the idea and video. Your videos and how you approach and overcome are AWESOME!. It is people like you that inspires me. Please continue to make awesome videos! Mike from Tucson, AZ
Hi, I built 3 of them..... I replaced the dowels with couch screws.... 6 mm , 8 mm & 10 mm.... Now I can use 3 different sizes... Thanks for the idea and awesome projects. John Preston (South Africa)
My English skills are short, so I can't express myself, but I really like your video. I'm a woman who works in woodwork, too. I'm a little clumsy, so I often watch woodworking videos and learn with my eyes. The tools you make seem simple and accurate. I really like that it makes the work possible.. you are great~~!!!!!!
That is a genius solution, Thanks for sharing this! I have not been a big fan of dowel joinery because of the problems you stated but this solution addresses those issues very well!
I bought the "inspirational jig" the "one I really want" in your notes a few months ago and love using it. It's versatile and the joints are strong. Yours is versatile and leaves money in your wallet. Great work. I think your enthusiasm is what shines the most though. Thanks for the videos.
A rather nifty design which I like. Right now, here in southern France were my barn workshop is freezing, everything is in hibernation until the warmer Spring weather so I've saved this as a little project for then. Keep 'em coming.
wow!! I really can not believe that how this Jig can join two pieces of wood precise together even better than similar of the stuff in market!! thank you very much Tamar to share that with us
I thought I already left a comment, but I don’t see it. So thank you again for all your videos, I truly enjoy them. Thank you for the jig plan. Looking forward to making it and then actually putting it to use. Keep up the good work!!!!
This is a great example of innovation, improving on an idea and bringing the innovation forward with a better jig. Tamer also provides us with a great example of integrity. She mentions up front where she drew her inspiration from and provided a link to that product. I just wish all the TH-camrs who've subsequently copied Tamar's innovation had that same integrity.....
As soon as I entered your website, I just loved all the jigs and ideas I found for my carpentry projects ... I also like your pleasant way that you show in your tutorial videos ... !Thanks! and greetings from México... !!Keep it up!!
Hi Tamar, another great video! The one thing that impresses me the most about you, as a self confessed untrained woodworker, is that you know all the correct woodworking terms. As a qualified furniture maker, you often take words out of my mouth when describing jobs. I think your woodworking knowledge is exceptional. Well done and keep up the great videos!!
i got 1 min 30 into this video when i subscribed. my reason - that you actually took the time to reply to peoples comments, not many youtubers do that. That gets my vote, everytime. now to finish the video & watch some more of your clips :-)
I haven't seen this style of jig before. Easy to adapt for multiple size dowells. I have metalworking equipment so may build an alloy or plastic one. Thanks for sharing. Great job
Ingenious!!!! I have the same center-finding jig and have always been frustrated with it. There are many things I have seen on You Tube that impress me, but this is the first one that I am definitely going to make. Thank You!!!!
I've watched you progress in your skills and you've taken off like a rocket ship. You're an amazing learner, and an amazing teacher. This is fantastic.
Intelligent content, natural presentation, and informative. Oh and did anyone say ‘gorgeous accent’ yet? Thanks for your great videos, and best wishes from the UK.
2:22 - I don't know if this helps, but when using an awl, I find that placing your thumb near the end and resting/rolling your thumb helps to quickly line up the point the where you're needing to place it. If that doesn't make sense let me know and ill explain it better if I can
Thank you for taking the time to make this video. I’ll add that some metal tubing is not precisely 1/4, 3/8, or 1/2”. One may use something called a steel spacer in the nuts and bolts area of one’s local hardware store. Such spacers are only a few cents, come in various lengths (no need to cut them) and pound nicely into wood like you showed. Also Lee Valley makes inserts and bushings for interchangeable sizes (I think something like 6 sizes), but the require a 5/8ths hole, larger than most drill indexes. Anyway great video.
Your work is always so excellent, presented and explained clearly, and throughout the duration with a demeanor that's always so pleasant and glowing with positive energy, that for me it's theraputic and relaxing as well. Wish I'd come across you sooner and very glad I did because you certainly have become one of my favorites. Thanks sister....much love.
I make a lot of tools I need for locksmithing and machining auto parts. I even developed and made a bunch of jigs for tungsten wedding band manufacturing at a previous job. We have to make these things! Mine are mostly made of aluminum & Delrin. Love your special tools.
Hi tamar It is a very helpful jig and I will try to make it Thanks a lot and always your channel is my favorite place to learn woodworking Keep going with my best wishes for you
Another winner ! You and your videos are an absolute pleasure to watch . Humor, humility and great ideas and super delivery. Tank you. Keep them coming please.
I enjoy the creativity of projects more than the actual projects sometimes. Maybe we share that same experience. Always love your videos. This one is awesome!
I typically don't like taking templates from other people (only because I like designing from scratch) but this was too perfect to not use. Thanks for making a good a simple jig - I already love mine.
I just picked up the Milescraft doweling kit a short time back. Basically the exact same concept but with 3 different sizes of drill guides for various dowels. Yours is much nicer than a mass manufactured piece of plastic from the PRC.
I just subscribed to you about couple weeks ago that is the coolest little jig I have ever seen what sucks now is that I'm on my way to Home Depot to pick up colors and the bolt so thank you very much cuz I'm building it right now
Just found your channel and I'm impressed. I own a woodworking shop and enjoy learning new tricks, and seeing how other woodworkers enjoy the craft. Great content your a great teacher.
Always excited when I get notification of a new video from "3X3 Custom" as I know it will be great and useful content that is well produced. You really are an amazing self-trained engineer. I have found the best woodworkers I have known (and I am an "old guy") take the time to first build a jig.
Fantastic, will be making mine asap, love it, and it would be easy to make two or three at different sizes,. after all not many of us use 27 different dowel sizes three would more then cover me. Loving it.
if you want different sizes (bushes) look at the 3 screw in bushes (metric I know 6,8,10,) supplied with the 'cheap' Silverline pocket hole jig (£5.00. UK)
You are my hero. I really learn a lot from your channel. It is no wonder why you have gained so many followers in such a short time. Really looking forward to all your 2020 videos. Thanks Tamar!
I will definitely be building this jig. I have a plan to do some exposed dowel joinery to recreate a project my grandfather made before I was born. I think it is simple enough that one jig per dowel size would not be that crazy to make. Unless someone suggested a reasonable interchangeable insert for different dowel sizes, I think individual jigs would be easier to do.
Just finished making your jig. Works great. It’s the first jig I’ve seen on TH-cam that I thought would be useful enough, to take the time to make.
That’s so awesome to hear!!!
David Hooper spline jigs that ride along the table saw fence are well worth the effort. Other then that I agree.
My Name Is Bond yes. It’s on my website.
Grant Hultman a2
@@3x3CustomTamar Siempre disfruto mucho ver tus vídeos, proyectos muy útiles, grandes proyectos con el toque femenino que les das, saludos 👍
Being doing woodworking for over 50 years. Always enjoy seeing someone discover a better method. Congratulations
Awesome to hear! Thanks!
I love to see the joy and satisfaction on your face when you finished a project, it is real.
Haha! I’m always surprised when something works. 😂
that's super relatable lol... every time I start to assemble a project, I genuinely get surprised when it goes together well and looks good right off the bat
.....as I've said before, TIP TOP VIDEO.!!!
A vast number of youtubers could learn a lot by watching your videos.
Straight forward.
No unnecessary faff.
And no playing to the gallery.
You are on my short list of natural matter-of-fact presenters.
.....oh and by the way , the content is always relevant and therefore interesting.
So glad to hear! Thanks so much!!
I've seen variations of the first half of your jig. But that second half...😍😍😍 My grandfather would say..."that's pretty slick".
Ha! Glad he would approve! Thanks!
Tamar, I never thought of women as being great at wood woking. Im new to wood working so I don't know much, Im learning through TH-cam. Watching and listening to you is very inspirational. You use intelligence in every project you put on TH-cam.i hope one day to be as good as you and many of the other wood workers I see on TH-cam.
I am not sure why I would buy an expensive dowel jig when yours is so handy and has more functions. Can't wait to make one.
This is the best thing that I've ever seen.
Ha. Awesome
You realize that you are a genius, right? I love to watch your videos because you are so clever at conceiving and making jigs. Thank you.
😂
This is exactly what I need right now for my latest project, awesome
Awesome! Hope it works out for you!
I just wanted to say, out of all the woodworking channels, yours is by far the most creative, you make jigs and projects that mostly have never been done before on youtube, and really get me in the spirit to just go to the shop and make stuff! Great job!
That’s so awesome to hear! I really appreciate that!
Love this. You continue to put out great stuff Tamar!
Thanks so much! Really appreciate that!
There R many videos out there on how to make this jig but none of them explained so well the simple details the way you did it Tamar. Well done, you're the one. Keep doing this. Lov your work.
Glad you liked it!
This is a really nice idea and invention! Well done!
Thanks so much!
Thanks so much for sharing. I'm addicted to jigs and have made a few for my table saw, bandsaw, drill press and lathe, specially for pen making. I recently made a couple chairs and was trying to make a dowel jig and found your video and must say this is the best instructional video on this jig.
Thanks for sharing.
Awesome to hear! Glad you liked it!
This channel has some of my favorite woodworking project. I can't wait to be done with my remodel so I can get my shop setup and make some of this stuff!
Awesome! Thanks!
Hey Tamar, thanks for making this available to us all. I just realized after going to Lowe’s to purchase the steel bushing for the center hole, purchase a second bushing with 3/8 outside diameter and 1/4 inside diameter. Then your dowel jig works perfectly with both 3/8 and 1/4” dowels, same jig, just ad a smaller bushing. I too will likely only use 3/8” dowels but I thought I share! The bushings were in the hardware isle.
This is a great idea. Thanks for sharing it. Definitely saving this one in my woodworking playlist.
Awesome. So glad you liked it
Thank you so much for this! I was evaluating jigs that seem overly expensive (at least for my budget) and this jig seems so much better - not even including the satisfaction of making the jig. My search for a dowel jig ends here - this is exactly what I will do!
This jig is amazing!! I'm new to woodworking but I could have used this today!! Great video!
your channel is my dream, it moves towards joinery and cabinetry. and innovation, and independence. and you’re female, which is inspiring and empowering for me. mostly i am just amazed at your clamps that dont require screwing, just a knock of the hammer... magic! but your jig blows my mind, the spatial reasoning involved in designing these things is kinda crazy cool.
Thanks so much! I have a lot of fun figuring this stuff out ☺️
Really great ideas.....you remind me of my daughters with their "can do" attitude. Wish I had your shop....outstanding!
Thanks so much! They sound cool 😉
Great jig.You have taken the already known dowel jigs to a new level. I am speechless...
Thanks so much! It was fun to figure out
Thank you for making these videos. I am so impressed with your skills and knowledge. You are at the top of your craft, you still work to get better, and you teach others how to improve their skills. I tip my hat to you.
That’s so awesome to hear! Thanks so much!
The jig you based off of is the jig I do have. I have only used it on one project. I had one are where things just did not line up. There was no issue with the jig, it was my error of how I lined up my boards. I drilled the board facing the wrong way. That is one thing you have to do is be mindful of your board orientation. I fixed by switching to pocket holes. It was my first project with the jig, and I learned from my mistakes. Yes the jig is plastic and if does wear out or break, I now have a source to know how to make a replacement jig. Thank you for the idea and video. Your videos and how you approach and overcome are AWESOME!. It is people like you that inspires me. Please continue to make awesome videos! Mike from Tucson, AZ
That’s so awesome to hear! Thanks!
Hi, I built 3 of them..... I replaced the dowels with couch screws.... 6 mm , 8 mm & 10 mm.... Now I can use 3 different sizes... Thanks for the idea and awesome projects.
John Preston
(South Africa)
Sounds like an awesome idea!
Oh I like this one! I'm adding this to the list of things to try! Thank you for sharing!
Awesome! Hope you like it!
My English skills are short, so I can't express myself, but I really like your video. I'm a woman who works in woodwork, too. I'm a little clumsy, so I often watch woodworking videos and learn with my eyes. The tools you make seem simple and accurate. I really like that it makes the work possible..
you are great~~!!!!!!
So glad you like the videos! Thank you!
That laugh after using the portable bandsaw lol. That's me whenever I use a new tool.
Hahaha! Yeah. Tools are fun 😂😂😂
Good job Regards from Poland
Wojciech Sokołowski thanks!
Thank you Tamar, you have helped in so many wood working that you cannot imagine... bless you
Awesome
Wow, this is really clever. Who need a biscuit jointer! Haha
Ha. Thanks!
That is a genius solution, Thanks for sharing this!
I have not been a big fan of dowel joinery because of the problems you stated but this solution addresses those issues very well!
Glad it was helpful!
I'm not a woodworker but I recently discovered your channel and I'm so inspired by your videos
That’s so awesome to hear! Thanks!
I bought the "inspirational jig" the "one I really want" in your notes a few months ago and love using it. It's versatile and the joints are strong. Yours is versatile and leaves money in your wallet. Great work. I think your enthusiasm is what shines the most though. Thanks for the videos.
Glad you like it! Yeah. That jig looks so great
A rather nifty design which I like.
Right now, here in southern France were my barn workshop is freezing, everything is in hibernation until the warmer Spring weather so I've saved this as a little project for then.
Keep 'em coming.
Awesome! I feel ya! I’m freezing in my shop. Ha
wow!! I really can not believe that how this Jig can join two pieces of wood precise together even better than similar of the stuff in market!! thank you very much Tamar to share that with us
So glad you liked it!
I thought I already left a comment, but I don’t see it. So thank you again for all your videos, I truly enjoy them. Thank you for the jig plan. Looking forward to making it and then actually putting it to use. Keep up the good work!!!!
Glad you like them!
This is a great example of innovation, improving on an idea and bringing the innovation forward with a better jig. Tamer also provides us with a great example of integrity. She mentions up front where she drew her inspiration from and provided a link to that product. I just wish all the TH-camrs who've subsequently copied Tamar's innovation had that same integrity.....
Glad you like it! ☺️
As soon as I entered your website, I just loved all the jigs and ideas I found for my carpentry projects ... I also like your pleasant way that you show in your tutorial videos ... !Thanks! and greetings from México... !!Keep it up!!
So awesome to hear. Thanks!
Hi Tamar, another great video!
The one thing that impresses me the most about you, as a self confessed untrained woodworker, is that you know all the correct woodworking terms. As a qualified furniture maker, you often take words out of my mouth when describing jobs. I think your woodworking knowledge is exceptional.
Well done and keep up the great videos!!
Thanks so much! I do a lot of research 😉
I have seen a few homemade dowel jig's. yours has been the best in the homemade version. A+ in my book
That’s so awesome to hear! Thanks!
Made one (thank you) and then left it at a friends house and ordered the one from woodcraft. Both are awesome,
Haha
i got 1 min 30 into this video when i subscribed. my reason - that you actually took the time to reply to peoples comments, not many youtubers do that. That gets my vote, everytime. now to finish the video & watch some more of your clips :-)
Ha. Awesome. Glad you like it! Connecting with people is one of the great things about being part of the woodworking community
Clear instructions and proper explanations for why you do each step. Will definately be using your design. Thank you very much
Awesome. Glad you found it informative!
I haven't seen this style of jig before. Easy to adapt for multiple size dowells. I have metalworking equipment so may build an alloy or plastic one. Thanks for sharing. Great job
Awesome. Glad you liked it!
I've always resisted using dowels because of alignment problems. I think this is the answer. Thanks!
Totally. That was always my issue too
One of the smartest jigs I’ve ever seen. This is a great build! Thank you for this!
Another win from the Queen of Jigs. Thanks Tamar!
Hahah! Thanks so much!
Ingenious!!!! I have the same center-finding jig and have always been frustrated with it. There are many things I have seen on You Tube that impress me, but this is the first one that I am definitely going to make. Thank You!!!!
Awesome! I hope it works out for you!
Absolutely love watching your videos...it's a nice change from some of the boring monotone videos that tend to put me to sleep.
So glad you like them
I've always had problems lining things up perfectly for dowels. I've made this jig and it works perfectly. Thanks for sharing
That’s so awesome to hear! Glad it worked out for you!
I've watched you progress in your skills and you've taken off like a rocket ship. You're an amazing learner, and an amazing teacher. This is fantastic.
Thanks so much! I love learning and sharing!
Intelligent content, natural presentation, and informative. Oh and did anyone say ‘gorgeous accent’ yet?
Thanks for your great videos, and best wishes from the UK.
Hahaha! So funny, I don’t hear my accent, but I guess no one does...
2:22 - I don't know if this helps, but when using an awl, I find that placing your thumb near the end and resting/rolling your thumb helps to quickly line up the point the where you're needing to place it. If that doesn't make sense let me know and ill explain it better if I can
You are such a clever lady, Tamar. I look forward to seeing what you do with it.
Thanks! I’m excited to use it
Oh wow, fantastic. Fairly new to woodworking, other than general garden projects, I think I'll give this a go! Thank you.
Have fun!
for something so simple, this jig is amazing
Thank you for taking the time to make this video. I’ll add that some metal tubing is not precisely 1/4, 3/8, or 1/2”. One may use something called a steel spacer in the nuts and bolts area of one’s local hardware store. Such spacers are only a few cents, come in various lengths (no need to cut them) and pound nicely into wood like you showed. Also Lee Valley makes inserts and bushings for interchangeable sizes (I think something like 6 sizes), but the require a 5/8ths hole, larger than most drill indexes.
Anyway great video.
Good to know!
Tom McCurnin Would you be so kind to PM me please?
Your work is always so excellent, presented and explained clearly, and throughout the duration with a demeanor that's always so pleasant and glowing with positive energy, that for me it's theraputic and relaxing as well. Wish I'd come across you sooner and very glad I did because you certainly have become one of my favorites. Thanks sister....much love.
Awesome to hear. Thanks!
Really clever-again. You are the goddess of jigs. You and Izzy should make something together.
Thanks so much! That would be fun. Ha
I've seen many diy doweling jigs on TH-cam and yours seems the most simple, smart and adaptable to me. Awesome work I'll try to copy !
Awesome. Good luck!
Your videos are simply,efective and very helpfully. i enjoy each video you make it.
That’s so awesome to hear. Thanks!
Good job on your version.. yes indeed, the Milescraft DowelJig is very versatile dowling jig
Thanks!
Nice jig , this exact design has been around for quite a while. Good build and clear instructions.
Thanks!
Hi Tamar,
Another very useful jigg.
The more precise one makes it, the better it will fit.
As always, thank you for sharing.
Willy from Belgium.
🙏🙏🙏
So glad you liked it. Thanks!!
@@3x3CustomTamar Hi, Tamar,
So glad you made it.
And another thumbs up t support you. Ha.
Willy from Belgium
🙏🙏🙏
Congratulations. Great Job. Greetings from São Paulo/ Brazil. Thank you for sharing.
Thanks!
I make a lot of tools I need for locksmithing and machining auto parts. I even developed and made a bunch of jigs for tungsten wedding band manufacturing at a previous job. We have to make these things! Mine are mostly made of aluminum & Delrin. Love your special tools.
So fun to figure this stuff out!
Hi tamar
It is a very helpful jig and I will try to make it
Thanks a lot
and always your channel is my favorite place to learn woodworking
Keep going with my best wishes for you
Awesome to hear. Thanks!
Another winner ! You and your videos are an absolute pleasure to watch . Humor, humility and great ideas and super delivery. Tank you. Keep them coming please.
So glad you like them. Thanks!
Tamar, Great dowel jig and excellent video imo! I created my own based on your video and it works flawlessly. Thank you. All the best...
Awesome. Thanks!
Smart and simple tool, nice work Tamar!!
Thanks so much! It was fun to figure out
Elegantly simple, like all the best designs.
Thanks!
I enjoy the creativity of projects more than the actual projects sometimes. Maybe we share that same experience. Always love your videos. This one is awesome!
Thanks so much! Totally. I love figures stuff out. It’s so satisfying.
This jig is actually better than the commercial one I bought. Thanks for cool idea.
Awesome. Glad you liked it.
One word: Genius. Just genius.
Thanks! ☺️
I typically don't like taking templates from other people (only because I like designing from scratch) but this was too perfect to not use. Thanks for making a good a simple jig - I already love mine.
So awesome to hear! So Glad you like it!
I just picked up the Milescraft doweling kit a short time back. Basically the exact same concept but with 3 different sizes of drill guides for various dowels.
Yours is much nicer than a mass manufactured piece of plastic from the PRC.
It’s nice to have that option for different sized holes though. Thanks!
I just subscribed to you about couple weeks ago that is the coolest little jig I have ever seen what sucks now is that I'm on my way to Home Depot to pick up colors and the bolt so thank you very much cuz I'm building it right now
That’s so awesome to hear! Good luck with it!!
Just found your channel and I'm impressed. I own a woodworking shop and enjoy learning new tricks, and seeing how other woodworkers enjoy the craft. Great content your a great teacher.
Thanks so much! Appreciate that!
so blown away by all your ideas. love it! thanks for sharing
Awesome to hear! Thanks!
Very cool jig. Also learned how to do dowelling. I saw a Wolfcraft dowelling jig, didn't know how it worked.
Smart solution. Built it myself, works like a charm. Thank you 👍
Always excited when I get notification of a new video from "3X3 Custom" as I know it will be great and useful content that is well produced. You really are an amazing self-trained engineer. I have found the best woodworkers I have known (and I am an "old guy") take the time to first build a jig.
That’s so awesome to hear. Thanks so Much! I love figuring this stuff out
Yeah, the idea is briliant . Thank you for sharing it . This is the best Doweling jig I have ever seen. I will try to make it .
Awesome. So glad you like it
This is great. The easy of a biscuit joiner in a dowel jig.
Thanks! Glad you like it!
Glad I found your channel. Love that you make these tutorial videos
Awesome! So glad you like it!
Thank you so much for this video. I'm from Brazil and everything here is just much more expensive than in USA. So this is really helpfull.
Awesome. So glad it was helpful
this is fantastic. your engineering skills are enviable and then you throw in the woodworking skills. thank you so much for your videos
So awesome to hear! I wish I discovered earlier in life that I was j to all this stuff so I could get a proper education. Ha
How cool is that? So cool. You are an amazing woodworker with those beautiful hands. Thanks for sharing.
4:35 That's the exact same noise I make when I'm happy that I bought any specialty tool for the job 😊
Just printed out your jig. Can’t wait til tomorrow so I can attempt to make it. Really enjoy your videos. I wish you were my neighbor !🙂 thank you
My god was this your invention?? What a great jig!! It all just ligns up!!
Great presentation as always, really enjoyed joining you along the process.
Thanks so much! This was just my DIY version of a jig that already exists
Fantastic, will be making mine asap, love it, and it would be easy to make two or three at different sizes,. after all not many of us use 27 different dowel sizes three would more then cover me. Loving it.
Awesome! Totally agree! Think I’ll just make one more for smaller dowel
if you want different sizes (bushes) look at the 3 screw in bushes (metric I know 6,8,10,) supplied with the 'cheap' Silverline pocket hole jig (£5.00. UK)
You are amazing. And this jig is fantastic. Recently found your channel and enjoying all you are doing.
Glad you like it. Thanks!
You are my hero. I really learn a lot from your channel. It is no wonder why you have gained so many followers in such a short time. Really looking forward to all your 2020 videos. Thanks Tamar!
That’s so awesome to hear! Thanks so much! I love this stuff. Ha
I will definitely be building this jig. I have a plan to do some exposed dowel joinery to recreate a project my grandfather made before I was born. I think it is simple enough that one jig per dowel size would not be that crazy to make. Unless someone suggested a reasonable interchangeable insert for different dowel sizes, I think individual jigs would be easier to do.
Awesome! Hope you like it!
It's so great to see that you keep you ads at the end ❤️😁. It shows that you value your content more.
Really well done , you are a good communicator
Thanks! Glad you liked it!
That’s a really clever design! Simple but smart. Thanks for sharing!
Glad you like it!
That gig is brilliant!!!
Tanks Tamar, you are muy TEACHER!!!
Desde Reynosa Tamaulipas México, GRACIAS amiga!!!
P. D: Tu sonrisa es MARAVILLOSA!!!
Thanks! So awesome to hear!