Thanks brother i also faced the similar issue i directly followed your procedure and achived the success. Keep post challancing solutions without fail.
Eu segui o seu passo a passo, ficou perfeito, consegui reparar, Graças a seu vídeo, perfeito. Parabéns excelente profissional, obrigado por me ajudar, com seu vídeo.
Can be seen under a microscope. In this place was seen what shielding cover is damaged. The place where it is soldered shielding cover. Shielding cover cut out with mini grinder. PCB to scratch with a scalpel.
Hello. There is no point take the wire from the connector. It is better to take the wire from the test point where the video is shown, because the track goes to the procesor CPU.
My screen was working fine, I have a copy, but my software was updated and it didn't work anymore, I have made other software again and I can't solve it
@@tomasitasovc9372 the touch, but I was already able to solve it. I tried another quality OLED screen and it works wonderfully. Apparently the INCELL quality screen no longer worked after the software update. I recommend removing automatic updates on all Samsung devices, and checking if they do not cause errors to other users before installing it on your device
Thanks brother i also faced the similar issue i directly followed your procedure and achived the success. Keep post challancing solutions without fail.
You're welcome.
Good job Tomas!
Welldone..👍👌
For the 1st time I saw the tracks inside the board ❤
You're welcome.
Eu segui o seu passo a passo, ficou perfeito, consegui reparar, Graças a seu vídeo, perfeito. Parabéns excelente profissional, obrigado por me ajudar, com seu vídeo.
You're welcome.
GOOD JOB THANKS FOR VIDEO
You're welcome.
How do you know to scratch that place in pcb bro ?? Which tool did you used for it? Please reply 🙏
Can be seen under a microscope. In this place was seen what shielding cover is damaged. The place where it is soldered shielding cover. Shielding cover cut out with mini grinder. PCB to scratch with a scalpel.
super ze pokazales, nie trzeba sciagac CPU ....zrobione :)
Proszę.
Good work
You're welcome.
what if i take a wire from that pin 14 connector pad and solder it exact component it connects does that easier with it
Hello. There is no point take the wire from the connector. It is better to take the wire from the test point where the video is shown, because the track goes to the procesor CPU.
Thanks❤
You're welcome.
Is expirience needed?
Yes needed.
what schematic are you used
I use these schematics: ZXWTEAM and XinZhiZao but there is no complete schemetic. You can try DZKJ Schematics.
Qual fio recomendado para esse serviço?Pois a trilhas são muito fina para um reparo desses
hello. Maybe you can write in english.
My screen was working fine, I have a copy, but my software was updated and it didn't work anymore, I have made other software again and I can't solve it
Hello what exactly is not working on the phone after the update?
@@tomasitasovc9372 the touch, but I was already able to solve it. I tried another quality OLED screen and it works wonderfully. Apparently the INCELL quality screen no longer worked after the software update. I recommend removing automatic updates on all Samsung devices, and checking if they do not cause errors to other users before installing it on your device
@@tomasitasovc9372same procedure for A33 touch screen not working after update ?
B@@tomasitasovc9372lcd is not working even on my sumsang a54 5g
Where from you are
Hello. I'm from Lithuania.
I have the same problem with my A53, touch not responding and can't enter into hard reset mode/recovery mode
Hello. Fault on the PCB board. How can I help you?
Hi. Fault on the PCB board.
thankkkkkkkkkk you
You're welcome.
I have the same problem the touch is not responding even the screen is ok. Can you please help me
I showed in this video. How to check the main connector with a multimeter. 6 pins. And how to find and fix it. How else can i help.
Hi sir graphics problem how
Hello. Try to check the display connector very often it is damaged.
all pin ok but same touch issue sir touch fix file also used not luck
Your problem is software
Hello. There may be a screen or flex problem.
Como faço pra enviar minha placa mãe pra vc
Can you write me in english.
Kiya apni shop ka address bata sakte h kaha par h pls 😅😂😂😂
Hello. How can I help you?
Samsung A53 Touch is not working, so try to cut the shield,
but now the phone works but no display😢
Hello check the other main board display connector pins.
@@tomasitasovc9372 More lines damaged It's display-related, so two long jumpers are job done, working perfect.
Thank you so much, bro.
Brother give Me your Number I Have Same Problem in Panipat Haryana
Hello ask me in the comments, maybe I can help?