New Free Energy | We put this infinite energy engine to test | Liberty Engine #2

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 มี.ค. 2024
  • Activate your subtitles!
    In this video we are going to answer all your questions about our last video about the infinite energy engine created with an engine and a truck alternator modified with neodymium magnets. We also show you very long shots from various angles and even in motion so you can see that there are no wires hidden anywhere.
    Warning: The use, copy, manipulation or broadcast of this video or part of it without the consent of the author is totally prohibited. This video is protected by copyright.
    Si quieres ver este vídeo con audio en castellano, ve a • El Motor de energía gr...
    #wood_stove
    #generator
    #220vgenerator
    #electricgenerator
    #freeenergy
    Table of Contents:
    00:02 Introduction to the Infinite Energy Video
    00:22 The infinite energy engine explained in depth
    00:55 Motor on transparent table
    03:29 How the infinite motor works
    04:30 How a 24v alternator generates 220v
    05:30 Detailed measurements and explanation
    10:29 Why we use a single-phase motor instead of a three-phase motor
    11:00 Energy cannot be obtained from nothing
    11:30 Extended explanation of the 24v alternator
    12:00 Is there a hidden battery?
    12:32 Walking around with the device in your arms
    16:33 Are there hidden wires?
    16:58 Why the voltage is constant
    17:45 How to stop the machine
    18:20 Why don't we show our face?
    18:42 Maintaining the machine
    19:20 Why it is not for sale
    20:05 Diffuse infinite energy
    Become a member to enjoy many advantages!
    Conviértete en miembro de este canal para disfrutar de ventajas:
    💥 / @hiddentechnology_
    ------------------------------
    Remember, don't try to replicate this engine on your own
    💥 Telegram Private Channel: t.me/hiddenTechnology
    💥 Twitter: @Thecrazychanne4
    HOW WE RECORD OUR VIDEOS
    -Sony RX10 IV: amzn.to/3VDUXFg
    - iPhone 14 Pro Max: amzn.to/3CipqSi
    - K&F Concept Tripod: amzn.to/3YSvMBP
    - Cayer FP1450 Tripod: amzn.to/3C7gIWX
    - Display Batteries: amzn.to/3IgeoRt
    - Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9
    free energy
    free energy generator
    hidden technology
    freie energie strom erzeugen
    gibbs free energy
    oscillating magnet
    new
    energia libre
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 4.7K

  • @woywood
    @woywood 2 ปีที่แล้ว +30

    Hi, can you describe all the details of components, to recreate the entire experiment?
    measures of magnets, wires, model of motors, etc?... please. Thanks a lot.

    • @mutiahhx6625
      @mutiahhx6625 ปีที่แล้ว +1

      @Aaron Dalton so true..

  • @jerryb1234
    @jerryb1234 2 ปีที่แล้ว +14

    I've been saying for years now that this was possible, but I need one big enough to run a large camper, I guess I need to just start building me one, thanks for sharing.

    • @philippecaouette4275
      @philippecaouette4275 2 ปีที่แล้ว +2

      around 12:45 we see the red wire hidden or the shadow on the bottom of the red shelf

    • @jamibeckham4544
      @jamibeckham4544 2 ปีที่แล้ว

      My ex used to talk about building this for years , especially since the gas prices have gone up so high. Looks like he's right.

    • @wturber
      @wturber ปีที่แล้ว

      ​@@philippecaouette4275 There is a fuzzy red line there and I see no reason for it. Also, right before he sets it on the table, you can see a dark line reflected in the table top. Right at 12:46. Maybe that's what your are referring to? That suggests something dark hanging between the table top and the red background that is being reflected in the platform top. If the video producers would like, I can remove that for them in After FX.
      Also, why carry the device so low. Lift the sucker up high for us puleez. :^)
      BTW, the way to show this is to put it up on a rotating pedestal. But then they'd have to have a transparent base (why the yellow black edge tape on the device's base?), a transparent power strip, and transparent device cases to make the puzzle really hard. Right now there are just so many possible ways to hide stuff.

    • @martialbenaroche291
      @martialbenaroche291 ปีที่แล้ว

      Yykjj

    • @jefferywatterson9412
      @jefferywatterson9412 หลายเดือนก่อน

      I just wonder how many of you that are saying this and saying how many of you have actually tried to 4 Mile the only one in here that's not a professor of energy and electronics??? Because I have seen a lot of people say things wouldn't work and they never tried them themselves. Because from what I read and studied this is possible if you can boost the output .

  • @nrs91
    @nrs91 2 ปีที่แล้ว

    What are the two modules on top of the motor?
    The junction box is commonplace but the small tubular device with the wire coming out and going into the junction box I dont recognise?

  • @clauszenner4081
    @clauszenner4081 2 ปีที่แล้ว +1

    Hello, is this also possible with a 14V alternator with 200A power or does it have to be a 24V alternator with 200A?

  • @staticGenerator4You
    @staticGenerator4You 2 ปีที่แล้ว +24

    Patents don’t “sit in a drawer somewhere”. They’re made publicly available with all the details so people can recreate the device and improve the design or come up with a different design based on the patent.

    • @igorristic9655
      @igorristic9655 2 ปีที่แล้ว +3

      Have you ever heard of "planned obsolescence"?

    • @AlphaOmegaSigma07
      @AlphaOmegaSigma07 2 ปีที่แล้ว +3

      If it's publicly available then why don't you go find it and stop coping? He already made a full video on how to build one yourself. 🤡

    • @darthvader2980
      @darthvader2980 2 ปีที่แล้ว +2

      You don't patent something so that other people can use it. You patent something so that they can't use it - that's the capitalistic appeal of own intellectual property.

    • @MWLS1
      @MWLS1 2 ปีที่แล้ว

      Patents also expire, 10 years in the US, but not sure on renewals and usage/cost of the invention afterwards.

  • @dex8326
    @dex8326 2 ปีที่แล้ว +7

    what magnets were used? can you ask for specifications? motor magnets etc?

  • @RolandMitchell
    @RolandMitchell 2 ปีที่แล้ว +1

    I saw the First Video when the alternator was being taken apart and I Never once Doubted that the generator would not work What surprised Me at the End when a Single Phase Motor was connected to Produce Perpetual Energy and seeing on how it can Power a Heavy duty Drill and other devices I'll Give it a Try seeing that Electricity Prices have shot through the roof Thank you for sharing your Knowledge with us

  • @leonardnikolla8306
    @leonardnikolla8306 2 ปีที่แล้ว

    I understand all what you say, what's about sinus wave?
    And is this 50 Hz konstant?
    Thanks for your time

  • @user-wn5ww4ep9r
    @user-wn5ww4ep9r 2 ปีที่แล้ว +14

    Дайте, пожалуйста, ссылку на патент, который был зарегистрирован 60 лет назад нефтяной компанией.

  • @bielespolet4388
    @bielespolet4388 2 ปีที่แล้ว +26

    ok, we need a long live stream about this working non-stop

  • @rickusmaximus2435
    @rickusmaximus2435 ปีที่แล้ว

    I just want to know how ya take a DC alternator and make it put out AC current. Is it just the way the magnets are setup on the rotor that while it spins it vibrates just right to make it AC??? Or is it xuz u have 3 wires coming out of the alternator connected to a piece that u can connect only 2 wires too so going from 3 down to 2 wires make sit AC?

  • @hanterhoney7879
    @hanterhoney7879 ปีที่แล้ว +10

    Are you able to give at least the dimensions of the magnets in terms of length and width and height?

  • @abelebogomo5430
    @abelebogomo5430 2 ปีที่แล้ว +6

    Before venturing there are a concern, first is there a particular orientation or manipulation of the magnets to achieve the the N-S polarisation? Or as it appears sticking like poles together?

  • @a.mbasha9287
    @a.mbasha9287 2 ปีที่แล้ว +10

    Please can you inform me the measurements and details of magnetic peaces

  • @mariusciprianmuresan2711
    @mariusciprianmuresan2711 2 ปีที่แล้ว

    Hello, can you tell me what kind of neodymium magnets you use? N35 or N42 or N .... etc.
    thanks

  • @nicksautorepair6936
    @nicksautorepair6936 2 ปีที่แล้ว +115

    As another person commented, a parts list and procedure would be greatly appreciated. I’d love to build one and try it out. I have several alternators and single phase motors on hand.

    • @mickmccrory8534
      @mickmccrory8534 2 ปีที่แล้ว +13

      Try putting a fan in front of a wind turbine. Same results.

    • @the-876er
      @the-876er 2 ปีที่แล้ว +13

      I am definitely going to build one. My biggest challenge will be modifying the alternator.

    • @Hx4DNegus
      @Hx4DNegus 2 ปีที่แล้ว +4

      @@the-876er think outside the box. Maybe you might have a friend who is handy or a metal shop.

    • @chrisclarke6344
      @chrisclarke6344 2 ปีที่แล้ว +53

      The parts list,
      2lbs of unobtanium
      1gallon snake oil
      5oz of fairy dust.
      Procedure,
      Make magnets from unobtanium.
      Lubricate bearings with snake oil.
      Sprinkle fairy dust over contraption.
      Spend a week wondering why it doesnt work.

    • @cpoky
      @cpoky 2 ปีที่แล้ว +7

      @@chrisclarke6344 My man. As you can see on my comment they tried to call me out like GANGSTAS yet I see they havent replied TO my reply or answered anyone elses questions.

  • @1975Magnus
    @1975Magnus 2 ปีที่แล้ว +3

    I'd love to build this myself, but I can't find any 24Volt 200Amp alternator. Can there be a 12v 200a alternator instead of 24v ??

    • @earthssecretenergy2371
      @earthssecretenergy2371 2 ปีที่แล้ว

      remeber its all about where you live what country

    • @jeremygenslinger4874
      @jeremygenslinger4874 2 ปีที่แล้ว

      From my experience they are the same the only difference is the voltage regulators between 12 and 24 volt the windings and armature are the same.

    • @jeremygenslinger4874
      @jeremygenslinger4874 2 ปีที่แล้ว

      @@harrycallaghan2531 only between the different Amperages there are differences in the windings as far as the conversion of the 3 phase alternating current and the 12/24 voltage it is done through the voltage regulators. I have had thousands of them apart to rebuild them and have also switched a 24v to a 12v that was more amperage just by switching the voltage regulator.

  • @jgrade9694
    @jgrade9694 2 ปีที่แล้ว +37

    Can you share the list of parts? For example this specific size of the magnets

    • @lincolnschoolpreservation3574
      @lincolnschoolpreservation3574 2 ปีที่แล้ว +7

      neodymium magnets i think he comically shoots right past, i wonder what grade n how many, might be on another video. But curious why not connect some capacitors, diodes, inductors, well basically a buck convertor or buck boost convertor, smooth out the output to more constant stable current, n in theory u could hook up lithium ion rechargeable batteries n provide that power to an inverter n hook up to house breaker panel.

    • @flatout5815
      @flatout5815 2 ปีที่แล้ว

      @@lincolnschoolpreservation3574 that's the setup I'm looking for. 😆
      I want to see a whole home run on this and the process of doing so.
      Is risky business doing this on your own home. Seems best to just buy the breaker box run a bunch of breakers n wires n outlets on for say a table or floor. A test set. Then the process of running tons of electrical devices that you hope don't fry. So the cheaper or more useless and or "disposable" the better like already broken devices that still drain alot of power like a washing machine that spins but doesn't pump water anymore or a stove that the oven works but not the stove top.

  • @johngerhard1380
    @johngerhard1380 2 ปีที่แล้ว +1

    good job can you tell wat type of magnets and where did you got them from and type modal Number or part number . can you get them on ebay ,

  • @muebermuth
    @muebermuth ปีที่แล้ว

    hello, i have here a 48V dc generator and a six pole 380V generator/motor from an old generator. the question for me is how will the cables need to be put in place. the 48V dc was used to start the generating process for the six pole syncronous generator.
    can I use this? how big (HP or KW) needed to be the three phase Motor to turn this 140KvA Generator? how shall i wire the whole thing? Possibly I need to remagnetise the 48V dc gen to errect the 380V AC asynchronus Generator. Or is it not possible to make it?
    cheers and many thanks
    Martin

  • @tiagaomiltimartins9923
    @tiagaomiltimartins9923 2 ปีที่แล้ว +8

    👋💯👍 pela primeira vez eu julgava que o outro motor sofreu modificações oculta com capacitores ou algo fora do normal, este vídeo é o melhor de 2022 do TH-cam ultrapassou os indianos para mim merece 💯⭐🌈

    • @renaldmartin2214
      @renaldmartin2214 2 ปีที่แล้ว +1

      I agree , I watch 1000,s but this one .. actually makes sense... With the prove and meter test. Great work my man.

  • @drauzioteixeiradasilvajuni3087
    @drauzioteixeiradasilvajuni3087 2 ปีที่แล้ว +28

    Amigo.. muito obrigado por sua dedicação e seu esforço em nos mostrar esse conhecimento... Deus abençoe 🙏

    • @m1tosenpai41
      @m1tosenpai41 2 ปีที่แล้ว +3

      Energia frequência e vibração... Eletromagnetismo...

    • @ThinkingBetter
      @ThinkingBetter 2 ปีที่แล้ว +1

      How long will the batteries last before it runs out of power? I am thinking about using 18650 Li-Ion cells for such setup. What battery type is used in this setup?

    • @aykutbekarbrushlessmotorpm1665
      @aykutbekarbrushlessmotorpm1665 2 ปีที่แล้ว

      🤣🤣🤣🤣👎👎👎👎👎👎

  • @BajaShine
    @BajaShine ปีที่แล้ว +1

    I’m familiar with this tech, only problem is he hasn’t showed this under load & how does it regulate the output? I’m also aware of 50 cycles & 220volts as that is European power specs. Just curious about regulation of power under load. Also to create several thousand watts it takes five to 13 horsepower to get this with an internal combustion engine. What is the maximum current draw for this machine? (& maintain voltage & current draw?)

  • @johnM-Jr
    @johnM-Jr 2 ปีที่แล้ว

    So the alternator will turn on its own independently of the single phase motor..? Or do the work off each other?

  • @muppetcp2000
    @muppetcp2000 2 ปีที่แล้ว +5

    This is crazy about 5 years ago I draw this down and everyone it would never work and you made this the exact why I drew it to. I never knew how to get enough power out of the alternator.

    • @supupandaway8138
      @supupandaway8138 2 ปีที่แล้ว +3

      They aren’t they have a battery in the bottom

    • @MrGoogelaar
      @MrGoogelaar 2 ปีที่แล้ว +2

      Mr Donutz Now you know how, go and build it and prove to yourself that it cannot work.

    • @099las
      @099las 2 ปีที่แล้ว +1

      Try building it when you get out of the asylum.

  • @ericdanby8584
    @ericdanby8584 2 ปีที่แล้ว +19

    How can I get a list of parts so I can build one of these. Were do you get the magnets from as they fit perfectly

    • @osloreal7042
      @osloreal7042 2 ปีที่แล้ว +4

      NASA not Elon Musk Space X someone must be CEO running and representing Elite own planning.
      He own shit as Jeff Bezos, Mark Zuckerberg, Warren Buffett. They are merely CEO appointed or Chosen by power to be Banking Cartel. They sponsor and own everything and above them is Holy Rome Vatican.
      Elon Musk should be hung on tree as money other before each of us loses life before the AI and war on human race globaly.
      This world is monopoly nobody
      is going to get the power that only few families have Wich are appointed by Vatican.
      Bill Gates Microsoft Software technology patent crypto currencies WO2020060606 cashless sociaty.
      He is to their papet ang guarantee will hand over his so call billioner money. Because he was appointed and useful and right as others many in the club parent to have all yet not quit so deception.
      Plumber from Poland who know NASA children story about
      going on Mars, Venus or any other
      plantes it is a crap story.

    • @osloreal7042
      @osloreal7042 2 ปีที่แล้ว +5

      Nicola Tesla invented free energy motor and also harness the power from the ether.
      You are cooned by everything in the world not to discover anything of truth just deception.
      You are treated as SLAVE as such you should remain.

    • @alsonadiaton6054
      @alsonadiaton6054 2 ปีที่แล้ว +4

      Before you dwell in this type of experiment, try other 'free energy' videos this inventor uploaded which is much more easier to replicate so you don't get much disappointed finding out this dude is a sham. Cheers

    • @traviswarren7082
      @traviswarren7082 2 ปีที่แล้ว

      Watch the video!!

    • @laputradajatuponchaikun6085
      @laputradajatuponchaikun6085 2 ปีที่แล้ว

      ဝရိန်​ဆော်လို့ရပါသလား

  • @kubilaygurbuz4546
    @kubilaygurbuz4546 ปีที่แล้ว +1

    Hello, I watched the video with interest. I have a question. How many amps should an engine be for alternator and engine compatibility?

  • @DemonEvidence
    @DemonEvidence 5 หลายเดือนก่อน +1

    At first, I thought all these comments were sarcasm! It doesn't seem to be, though! I have never seen a perpetual motion machine video with so many dupes! He really pulled a good one!

  • @nicoschadjidemetriou4373
    @nicoschadjidemetriou4373 2 ปีที่แล้ว +113

    My dear friend. Thanks for the excellent video presentation. I am an old physicist with knowledge on electronics and chemistry and i wanted to make some comments and suggestions to you. You already know that ENERGY CANNOT BE MADE FROM NOTHING. You mentioned earth's magnetic field.,which is very week for the cross section of the alternator etc.The best way to proof your invention is this : Connect a heavy load and meters for Amps and Voltage, so you will show the output power. Also do the same for the electric motor the same time so you measure the power the motor is taking. Then if is proof that the "free energy " is real please protect yourself from criminals and assholes. I don't want you to have the same faith of Standley Meyer .REGARDS and wishes from CYPRUS. All my best and TAKE CARE!

    • @kandardkanju729
      @kandardkanju729 2 ปีที่แล้ว +4

      Yess.. Corect..

    • @croweyes8546
      @croweyes8546 2 ปีที่แล้ว +5

      A good points of view brother thank you.

    • @Busted.Knuckles.Garage
      @Busted.Knuckles.Garage 2 ปีที่แล้ว +21

      I've known of this ability since the 1980's while in high school, we discussed turning a car alternators into household current, (not with magnets though) just through the electronics. Then I mentioned then why couldn't we hook up a low voltage electric motor with gears to drive the alternator, I do like the idea of the magnets to I crease the power output, one could still use a smaller voltage electric motor and use gears instead of a belt drive system to have even more output, just a thought, but Thanks for taking the time to make it, explain it to the Nay sayers, (which didn't listen in class, or skipped school all together) to me this is common sense but hay Thanks for Sharing for others to see, it's almost like Nikola Tesla said screw the guys funding him and said here's 2 invention now I pray someone figures out how to put them together because the capitalist wouldn't let him do it cause of greed, but please share as much as possible Thanks Y'all for watching and learning something that others have kept from you's for close to a hundred yrs. Andrew T From Barrie Ontario Canada L4M2Z8

    • @derausbauer4665
      @derausbauer4665 2 ปีที่แล้ว +6

      egal wie..... mit immer dagegen sprechen wurde nie was neues erfunden!

    • @christopherbaum3951
      @christopherbaum3951 2 ปีที่แล้ว +1

      @@derausbauer4665
      Ich glaube ich weiß was du meinst, aber bitte lerne etwas deutsch

  • @WhiteSwordInterieur
    @WhiteSwordInterieur 2 ปีที่แล้ว +22

    Alright, point proven! Credits to you guys! When I have the time I'll go and try build it my self too

    • @Mcevoy91
      @Mcevoy91 2 ปีที่แล้ว +3

      Surely this would be more important than anything else in you're life right now 😂😂😂😂

    • @aarontoddadventures3817
      @aarontoddadventures3817 2 ปีที่แล้ว

      @Benjamin Breeg hope it works

  • @muebermuth
    @muebermuth ปีที่แล้ว

    As I understood it there need to be put magnets to the inner part or can they be put non rotating to the outer part when using this synchronus gen which has run only 80 hours.. in the las 40 years.. It has coal contacts to magnetise the inner windings in the rotor.
    ideas how to make it produce 140KVA 400volts?

  • @SuperRogers2000
    @SuperRogers2000 2 ปีที่แล้ว

    Could you tell me where you found this 24volt, 200 amp alternator. All the ones I can find do not look like the one you are using in this video. Do you have to search for a 3 wire alternator also? Thanks.

    • @HiddenTechnology_
      @HiddenTechnology_  2 ปีที่แล้ว

      Don't try to build it at this moment. We haven't disclosed all the details yet.

  • @CBAILOF
    @CBAILOF 2 ปีที่แล้ว +3

    Gracias por mostrarnos este vídeo!!!
    Se podría conectar a una casa??
    Y como???
    Muchas gracias

  • @josephosorio5718
    @josephosorio5718 2 ปีที่แล้ว +28

    Good Job!!! Even if it is not perpetual it proves a potential to make more efficient and portable power sources at a more affordable price. Thanks for the idea and I plan on giving this a try. Also, remember, The automobile was at first thought to defy the laws of physics. Now look at it.

    • @NO-cb7po
      @NO-cb7po 2 ปีที่แล้ว +10

      Bro you’re cringe as this guy making these cringe videos, making money on idiots.
      He gutted alternator and he put batteries inside with weak electric motor same with gutted other electric motor, gutted so weak motor on batteries can turn it.
      Then aku-drill modified so it looks like it’s electric drill.
      So easy to convince uneducated people. So guys, educate yourselves, please!

    • @cfgtud4146
      @cfgtud4146 2 ปีที่แล้ว +13

      Actually your wrong about batteries, it will be to much of a hustle, but if you watch closelly at 12:46 and 16:21 you will observe with 0.25 speed on youtube that the handler has a cable attached to the platform running through his left hand. So the voltage is given by the motor and the socket connected to the main source in his house, thats why is so stable at 226 v under load. Its a well designed and crafted video to make money from clicks and views. The alternator produces some power after all but not even close to run the motor at 2800 rpm with no other loads. Its plain trickery my friend and your instinct is on the spot but the analisys was wrong. I liked the part were they were claiming that with the magnets can produce 10.000 w about 10 times the normal. Its like claiming they can fly but hey its digital so who knows?

    • @CostantinoLenzi
      @CostantinoLenzi 2 ปีที่แล้ว +4

      @@kanadskyvictor6512 you drik alcool to much

    • @CostantinoLenzi
      @CostantinoLenzi 2 ปีที่แล้ว +9

      @@cfgtud4146 i dont see cables hiden

    • @claudiostella1433
      @claudiostella1433 2 ปีที่แล้ว +4

      @@kanadskyvictor6512 probably you have to change your beer pusher...

  • @svengehse1618
    @svengehse1618 2 ปีที่แล้ว

    Hi there,
    what kind of light engine is that? 6 cables come out of mine at the back, each phase only brings 30 volts.

  • @haseeb5528
    @haseeb5528 2 ปีที่แล้ว

    One question how long we can run it, if we run it for a day isn't it gonna heat up? or some motor/alternator winding issues

  • @shine360vr8
    @shine360vr8 2 ปีที่แล้ว +18

    Wow , thank you for all the effort and attention to detail, this is world changing stuff

    • @099las
      @099las 2 ปีที่แล้ว

      No it's not world changing, there have been scammers as long as there have been men.

    • @bolerdweller
      @bolerdweller 2 ปีที่แล้ว

      @@gato-de-schroringer because is bs🤣

  • @pauldavis3168
    @pauldavis3168 2 ปีที่แล้ว +5

    This is practical. I figured out very quickly in the first video that you needed to pull start it. What is really puzzling is, why don’t the car manufacturers use this type of set up instead of batteries?

    • @Malike420
      @Malike420 2 ปีที่แล้ว +5

      @@Capicua718 I whole heartedly would love to believe that this is true. Would at least make it possible the charge your car while you drive or after you park with one of these in the trunk.

    • @StefanReich
      @StefanReich 2 ปีที่แล้ว +7

      Because it's nonsense. Generator converts motion to electricity WITH LOSS. Motor converts motion back to electricity WITH LOSS. It's a lossy system, not one producing energy.

    • @wturber
      @wturber ปีที่แล้ว

      Exactly. And if not car makers, why not municipal generating stations? And if not that, why not home builders? They could offer homes with lifetime free power. Heck, this would solve the world energy/gobal warming etc. situation. The reason is obvious. Because the device is bogus. Can I tell you how exactly they are faking it? No. Just as I can't tell you how exactly certain magic tricks are done. But rest assured, they are tricks. The difference is that the magicians are honest in that they don't pretend otherwise.

  • @dxyz6241
    @dxyz6241 ปีที่แล้ว +1

    could you tell us the TYPE of Valeo alternator 24V 200A you used ?

  • @dusty2989
    @dusty2989 ปีที่แล้ว

    Sorry but I noticed that when you pulled the wire to start the alternator it literally didn't do anything until all of a sudden in the next clip it was moving. What did you do to get it to successfully turn and start?

  • @theasiamtmgroup
    @theasiamtmgroup 2 ปีที่แล้ว +19

    Several things. 1: Please provide the details of the patent you mentioned. 2: Please connect something that REALLY draws a high load, like an AC unit or high powered oven. 3: Please show how long that load can be sustained. These simple things will go a long way. At the end of the day though, I am convinced that perpetual motion is impossible.

    • @philippecaouette4275
      @philippecaouette4275 2 ปีที่แล้ว +6

      around 12:45 we see the red thread hidden on the bottom of the red shelf just before you drop it....

    • @albertvdm
      @albertvdm 2 ปีที่แล้ว +4

      @@philippecaouette4275 You can actually see the shadow of the wire on the table and the blurred out wire. Thanks for pointing that out.

    • @liczkos
      @liczkos ปีที่แล้ว +1

      @@philippecaouette4275 Perfect man, you can see the editing done. Case closed for me.

    • @damnboy2998
      @damnboy2998 ปีที่แล้ว

      @@philippecaouette4275 yha your legend i see scret of power wire hiding😮😮🤣🤣👌👌red wire blur or edit adobi

  • @westhyphy
    @westhyphy 2 ปีที่แล้ว +6

    With this and hydrogen engine we can be self sufficient. Great video📹

    • @corneliuselbourne1044
      @corneliuselbourne1044 2 ปีที่แล้ว

      Hmm great idea.

    • @trillrifaxegrindor4411
      @trillrifaxegrindor4411 2 ปีที่แล้ว

      it is impossible,introduce any load and it fails..hydrogen is a whole other story

    • @terryhull9724
      @terryhull9724 2 ปีที่แล้ว +1

      @@trillrifaxegrindor4411 It will fail from internal losses without a load.

  • @philippecaouette4275
    @philippecaouette4275 2 ปีที่แล้ว

    around 12:46 when you raise it just before dropping it we see the wire hidden on the red background of the shelf behind you.... hidden wire???

  • @waynehammond1384
    @waynehammond1384 10 หลายเดือนก่อน

    Hi can you show how you wire the alternator and what wire does what many thanks.

  • @shaunskelton2133
    @shaunskelton2133 2 ปีที่แล้ว +4

    How long can you run it? With the overage of wattage it must heat up fairly quickly. Not that I want you to run it to failure but it must heat up quickly.

    • @ralfish
      @ralfish 2 ปีที่แล้ว

      Agreed. I think it must get hot. I assume that the best method would be to run a minimum of 3 in parallel with one rrsting/cooling whilst the others work

  • @szalontaibela
    @szalontaibela 2 ปีที่แล้ว +120

    Recognized info from the video for reconstructers: the drive motor is a part of a Centrifugal fan made by Utentra Italy. Type is: U/HC 163 ST. RPM: 2800 Weight: 9 kg
    HP (Horse Power) 0,75 = 0.55 kW (power ouput per axis) Single phase with starting condenser kind.
    Idle speed 3000 rpm, loaded speed is 2800 rpm. Current consumption with full load is aprox: 4A (900W) Efficiency of drive motor is around 60%

    • @Rave50ful
      @Rave50ful 2 ปีที่แล้ว +3

      Thanks!!!!

    • @cyrilmailletwebmaster
      @cyrilmailletwebmaster 2 ปีที่แล้ว +9

      Where to find the exact same magnets, and this truck alternator ?

    • @90daniman
      @90daniman 2 ปีที่แล้ว +8

      @@cyrilmailletwebmaster come on, do you know about Google? Amazon? You can find neodymium magnets with the size you need with only a little bit of moving the fingers. But first buy the exact specifications of the generator, cut the old magnets, then measure the place so that fits inside and don't touch the stator.

    • @cyrilmailletwebmaster
      @cyrilmailletwebmaster 2 ปีที่แล้ว +3

      @@90daniman yea i know, thats why i search to know the brand and exact spec of the gen

    • @csud9540
      @csud9540 2 ปีที่แล้ว +3

      Cheers Bela 👍

  • @rayamundson8394
    @rayamundson8394 2 ปีที่แล้ว +1

    Thanks for the tip. When alternator pole is at north , then the motor pole should be on north, so they do not cancel one another out.. I will experiment with this concept , thanks.. 1st experiment will be with my two horsepower one single phase 115/230 volt induction motor connected by time belt to the 24 volt 200 amp output alternator. I will use a compass and marker where the coils are on the outside of induction motor case with marker. I will do this to both generators with a 9 volt battery and use a compass to find my north and south poles on coils and I will mark them. I will keep battery connection all the same when testing coils for North or South. I will use my brackets and put them on a board I will have a timing belt and timing pulley to keep them in sink with each other. I will have a switch connected to a power source. I will have Positive connected to positive and negative connected to negative on both motor /generators. After I turn switch on , I will leave it for 10 seconds then turn the power off. I will see if the generators keep on running. I have NEVER heard of anyone doing this and I have Never done this myself. I hope this is the key. IF IT WORKS , I will run an 1800 watt heater with fan , An induction cooktop , 3 lights , My tv and lab top , I will charge my batteries with it and in the summer I will run an a.c unit In my van. have NOT built yet.

  • @cihanserce6754
    @cihanserce6754 4 หลายเดือนก่อน

    Could you explain how you configured the magnets and why?

  • @irmageller
    @irmageller 2 ปีที่แล้ว +4

    VERY WELL DONE!! MUY BUEN TRABAJO!! FELICIDADES!

    • @theycallmedonkey6664
      @theycallmedonkey6664 2 ปีที่แล้ว

      Hey my Spanish classes paid off for the reading part of Español.. you said very good work... congrats? Como se Felicidades en English

  • @milowho
    @milowho 2 ปีที่แล้ว +4

    Could you use this machine to recharge solar batteries on days where there is little or no sun?

  • @freebird11000
    @freebird11000 2 ปีที่แล้ว +1

    May I ask, what kind of alternator did you use? And what kind of vehicle did it come from and year? I am asking because I love to try and build me one. And thank you for sharing this Video.

  • @henknicovandenberg1211
    @henknicovandenberg1211 2 ปีที่แล้ว

    At 2:25 and 14:16 of the video you can hear a sound familiar to 'switching on of electrical power'. Why is that?

  • @xuuric
    @xuuric 2 ปีที่แล้ว +3

    En el primer video sabia que funcionaba, lo que la envidia en muy mala!
    Pero gracias por dejarlo mas que claro todos los detalles !! 💪💪😉

    • @HiddenTechnology_
      @HiddenTechnology_  2 ปีที่แล้ว +4

      Ahora apóyanos compartiendo el vídeo en tus redes! Gracias!

  • @kallefindefuchs3321
    @kallefindefuchs3321 2 ปีที่แล้ว +27

    How about a livestream? And in doing so, they connect a machine and let it run endlessly. and we can all then see their wonderful machine in action. Thanks for showing. And a live stream with your subscribers isn't a problem, is it? Greetings from Germany

    • @mattyizzie
      @mattyizzie 2 ปีที่แล้ว +4

      12 to 24 hour Livestream running constantly trying to make it stop using various power drawing items like lamps, kitchen items, etc

    • @ke4uyp
      @ke4uyp 2 ปีที่แล้ว

      Note he never talks about the amperage output of the system only the voltage.

    • @berndthiel613
      @berndthiel613 2 ปีที่แล้ว

      Was hältst Du von dieser Mühle Kalle .
      Sollte man es versuchen , was meinste ?

    • @ke4uyp
      @ke4uyp 2 ปีที่แล้ว

      @@berndthiel613 speak English

    • @berndthiel613
      @berndthiel613 2 ปีที่แล้ว

      @@ke4uyp , it`s not so easy for me to speak english ( writing ) because I am German and not in training for conversation in another language , so excuse me for mistakes please . I have bought the Alternator , exact the same from Audi Quattro and 1 Phasenmotor and the rest are Neodym Magnets from E-Bay . no problem . It is no Problem to built this mashine , one day of working , but what do you think , do you have information from other people who tried this and what do they say ? Greetings from NRW , its a country in germany , maybe you know ?

  • @andrejachberger4241
    @andrejachberger4241 2 ปีที่แล้ว

    It is possible to put under your video which alternator and which AC motor you used?

  • @campoint.x1032
    @campoint.x1032 ปีที่แล้ว

    does a alternator with 24v 150 amps work?
    can you use 2x 12v 200 amps alternator parallel?

  • @Wolf-nn7pv
    @Wolf-nn7pv 2 ปีที่แล้ว +12

    Ahoj a díky za skvělý nápad. Chtěl bych se zeptat na rozměry neodymových magnetu, které jsi použil. Díky.

    • @marekkosc
      @marekkosc 2 ปีที่แล้ว

      je to az moc jednoduche na to aby to takto fungovalo neviem ci sa da tomu verit

    • @MladejBoomer
      @MladejBoomer 2 ปีที่แล้ว

      Nebude to fungovat, protoze perpetuum mobile nefunguje.

    • @MladejBoomer
      @MladejBoomer 2 ปีที่แล้ว

      @@marekkosc verit se da tomu, ze to nebude fungovat.

    • @marekkosc
      @marekkosc 2 ปีที่แล้ว

      Robí to koli sledovanosti

    • @MladejBoomer
      @MladejBoomer 2 ปีที่แล้ว

      @@marekkosc nejhorsi je, ze nekteri lide podle komentaru vypadaji, ze veri tomu, ze by to mohlo ve skutecnosti fungovat.

  • @richardelkins523
    @richardelkins523 2 ปีที่แล้ว +4

    Will you be providing detailed plans on how to build this generator?

  • @aviad2202
    @aviad2202 ปีที่แล้ว

    Hi. I would like to get the alternator and motor data, I am interested in assembling one of these in my home for testing. What is the OEM of the alternator? And what are their other exact data (engine and alternator)

  • @Ciprian-Amarandei
    @Ciprian-Amarandei 2 ปีที่แล้ว +1

    How many batteries does it fit inside the stand ?(the one with black-yellow tape)

  • @Goalflex
    @Goalflex 2 ปีที่แล้ว +23

    Finally someone brave enough!! I'd love to build this myself, but I don't have the tech skills.

    • @Goalflex
      @Goalflex 2 ปีที่แล้ว

      @@apsert Belgium.

    • @andyhowlett2231
      @andyhowlett2231 2 ปีที่แล้ว +6

      Save your breath, it won't work!

    • @buddhadagreat4742
      @buddhadagreat4742 2 ปีที่แล้ว

      @@andyhowlett2231 yeah sure because you already proved that it doesn't right? Where is your video again?

    • @andyhowlett2231
      @andyhowlett2231 2 ปีที่แล้ว +4

      @@buddhadagreat4742 If it worked we would be powering our world with it. We're not. It doesn't.

    • @buddhadagreat4742
      @buddhadagreat4742 2 ปีที่แล้ว +4

      @@andyhowlett2231 not very sound logic when you consider there are billions of dollars at stake if it does work. governments and big investors don't want this to exist for the same reason. do you work for them is that it? your job is to discourage people to build these things with empty logic?? I think yes

  • @paolobavaro9013
    @paolobavaro9013 2 ปีที่แล้ว +7

    how did you model the resin of the rotor in order to make it rotate perfectly on axis?

    • @ferrofeles2063
      @ferrofeles2063 2 ปีที่แล้ว

      its not look at the variance of the power output and probably why they used a belt drive system honestly if you pay attention the belt is not staying at the same exact position it is bouncing quite a bit thus its not perfectly on axis something like this would be significantly harder if you hard mounted the motor to an alternator the vibrations alone would wreak havoc thus wy they used the belt drive if i had to guess its far more forgiving of that kind of thing

  • @yapanwolf
    @yapanwolf 2 ปีที่แล้ว

    what is the brand of this motor? utentra? i did`nt see any on internet. what spec has this motor and alternator?

  • @deisikbilgiler3464
    @deisikbilgiler3464 2 ปีที่แล้ว +1

    Gerçekten mükemmel bir buluş demek istiyorum önünde eğilip şapka çıkarılıcak nadir insanlardan birisiniz emeğinize sonsuz saygılar diliyorum Türkiye'den selamlar 🇹🇷🇹🇷🇹🇷🙏

  • @ramontrullols3350
    @ramontrullols3350 2 ปีที่แล้ว +12

    Buenas noches, estoy muy interessado pero me falta algun dato, como calcular las dimensiones i potencia de los imanes.
    ¿I realmente tiene que ser un alternador de 24V o sirve uno de 12V?

    • @maharbatc
      @maharbatc 2 ปีที่แล้ว

      Sirve uno de cualquier voltaje, obviamente variará el voltaje de salida, al final la proporción de voltaje es casi siempre 10 a 1, empíricamente hice uno así a los 12 años con un motor de 12 volts y generó suficiente para encender un foco de 110v 100w, también le conecté una radio, todo es el tamaño del motor y los magnetos

    • @donnajames11
      @donnajames11 2 ปีที่แล้ว

      @@maharbatc could you send me a list of what I will need to make one of these please would really appreciate it

    • @maharbatc
      @maharbatc 2 ปีที่แล้ว

      @@donnajames11 depends on your parts, basically you add neodymium magnets to the alternator, conect the alternator to the motor by cable and with two pulleys throw a band on the shafts, the sizes depend on the size of your motor and alternator

    • @maharbatc
      @maharbatc 2 ปีที่แล้ว

      You need to understand how easy this works, first I'm gonna suggest you to take any small motor, DC motor, make something to rotate it manually and connect a multimeter to the cable terminals, and see what happens on the multimeter when you rotate the motor

  • @csud9540
    @csud9540 2 ปีที่แล้ว +11

    Man, you thanked us for watching your video, I for one thankyou sir! And I feel bad that people are doubting your work, well you’ve shut them up with this video! Superb! I will rewatch the videos and make notes of what I need, I briefly seen some rpm figures etc, keep up the good work man, and well done, be proud of yourself!

    • @piceofcake6095
      @piceofcake6095 2 ปีที่แล้ว

      Buddy I don't know if you are being sarcastic, but it doesn't work, you cannot have free energy, cuz it is impossible, if they somehow made it actually possible and it is actually for money, why is the video still on TH-cam and not taken down by hire government, and also why people isn't talking about it on the news. Do you know why, cuz for now it is IMPOSSIBLE!!! IT LITERALLY TAKES 1BRAIN CELL TO UNDERSTAND THAT!!?!

    • @csud9540
      @csud9540 2 ปีที่แล้ว

      @@piceofcake6095 rack off blue! you ain’t puss in on this parade claaaaart, so save ya fingerprint, I ain’t listening to you.

  • @birminghamtilegroutcarpets8057
    @birminghamtilegroutcarpets8057 2 ปีที่แล้ว

    Great. Video's.
    Is there any detail to the magnet placement. Size?

  • @Don-sx5xv
    @Don-sx5xv ปีที่แล้ว

    Thanks man, I think you have proven your case, not sure why the other ones failed, but you have me convinced. Whats the cost of loosing, very low in comparison to not trying at all. On Saturday I purchased a used E-Bike, problem with battery and charger. Took it apart, battery and BMS soaking in water. Went to TH-cam. Now am I not only going to build new battery and charger for my bike, but I am going to build a system for my home. You can have a lot of fun with these 3.7 s . Imagination can take you a long way, as long as you exercise it. looking for a good source for battery/materials, if anybody knows somebody. I like how you talked us through it. Going to go and spend some time on your site. I Love great ideas

  • @RichardKaniku
    @RichardKaniku 2 ปีที่แล้ว +6

    Im very impressed about your presentatioñ and thè electrical engineering skills. 🙂 Love it cant wait to see the double alternator model. Thanks for sharing viewed the video all the way from the South Pacific.

    • @HiddenTechnology_
      @HiddenTechnology_  2 ปีที่แล้ว +2

      Please, help us sharing this video so more people know about this! Thanks for your support.

    • @piceofcake6095
      @piceofcake6095 2 ปีที่แล้ว

      @@harrycallaghan2531 Buddy I don't know if you are being sarcastic, but it doesn't work, you cannot have free energy, cuz it is impossible, if they somehow made it actually possible and it is actually for money, why is the video still on TH-cam and not taken down by hire government, and also why people isn't talking about it on the news. Do you know why, cuz for now it is IMPOSSIBLE!!! IT LITERALLY TAKES 1BRAIN CELL TO UNDERSTAND THAT!!?!

  • @sampojo
    @sampojo 2 ปีที่แล้ว +5

    Great job, video is very clear, seems all you need to know to make it yourself is there. TYVM! Can't wait to get started. The secret is the placement of the neo magnets on the rotor. Actually what makes this most feasible is the invention of the neo magnets.

    • @kenw.1112
      @kenw.1112 2 ปีที่แล้ว +1

      Only problem ... it does not work.

    • @nilutpolboro9839
      @nilutpolboro9839 2 ปีที่แล้ว +1

      @@kenw.1112 Did you try making it....

  • @olumidedexter6192
    @olumidedexter6192 ปีที่แล้ว

    How long can this last for.. I have believed in perpetual motion energy for years. I have an idea though can't be this done to power turbines directly..?

  • @jessephillips459
    @jessephillips459 ปีที่แล้ว

    Will any magnets work or do you need certain magnets? Where can I get the magnets from?

  • @johannschmidt2728
    @johannschmidt2728 2 ปีที่แล้ว +43

    Can you make a list of all the parts needed to build this generator?
    I would like to replicate the device.
    Simply out of pure interest and so that I am either convinced of the function or can banish the topic from my head to the world of fairy tales.
    I would then also make a video about the feasibility and the actual functionality.
    I've been interested in this topic for a while.
    Regards

    • @MrFixit1
      @MrFixit1 2 ปีที่แล้ว +8

      Yeah, I'm sure he will get rite on that. He will forget to mention the extension cord.

    • @travelandtech2185
      @travelandtech2185 2 ปีที่แล้ว +4

      A list and instructions would be suberb

    • @mikesickoflife6286
      @mikesickoflife6286 2 ปีที่แล้ว

      It super easy and conmen sense it’s sad I broke my back to figure it out and selling house and everything now but they will be out soon

    • @travelandtech2185
      @travelandtech2185 2 ปีที่แล้ว +1

      @@mikesickoflife6286 sorry to hear your pain 😢

    • @ajskiehistorie4911
      @ajskiehistorie4911 2 ปีที่แล้ว +2

      You may not forget to add to the list the black power wire hidden in sleeve. :D

  • @fiatlux5414
    @fiatlux5414 2 ปีที่แล้ว +6

    Since the alternator is strongly modified, how does that impact the electromagnetic field that the alternator emits? Has the level of EMF been measured?

    • @CostantinoLenzi
      @CostantinoLenzi 2 ปีที่แล้ว +2

      @@kanadskyvictor6512 i dont see

    • @kamilwidzyk4421
      @kamilwidzyk4421 2 ปีที่แล้ว +1

      Yeah, it's modified but it just spinning for a bait not connected anywhere.

  • @chrisswart7504
    @chrisswart7504 ปีที่แล้ว

    Hi. What size single phase motor need to be used

  • @katjaczajkov8694
    @katjaczajkov8694 2 ปีที่แล้ว

    Where i can get those magnetics?
    In which direction i should it install?

  • @thelastv8981
    @thelastv8981 2 ปีที่แล้ว +9

    O.k nice work dude, however the thickness of the base and the fact the edges are covered in tape remain an area of high suspicion for me. I would like to see it run with a clear base and all motor covers removed, including the multi plug case.

    • @MilanMancic
      @MilanMancic 2 ปีที่แล้ว +3

      I think the same.

    • @elyte2716
      @elyte2716 2 ปีที่แล้ว +4

      They power through the casing and and the whole Base is an inductor.. Somewhere there it should be a big coil

    • @judup775
      @judup775 2 ปีที่แล้ว +3

      exactly, mount everything on a transparent base

    • @mannyaguilar67
      @mannyaguilar67 2 ปีที่แล้ว +3

      People are so gullible. More so when they do not have the slightest idea of what something like this would represent. Free energy for the universe. It’s idiotic to think that a guy on TH-cam has the technology to do it but all the scientist in the world for centuries, trying to get, not a free, but just a cheap form of energy as alternative to oil, have been defeated by this guy. Ludicrous.

  • @sidekickgarage9276
    @sidekickgarage9276 2 ปีที่แล้ว +6

    I'm not an electrical engineer, but i do know a few things about cars. For one, i know that Alternators have this thing of increased resistance - meaning, that as the load increases, the magnets create drag, causing it to need more rotational force to spin. In other words, as a net zero circle, it might run for a very long time, yes, but as you add draw, the resistance will slow down the alternator, which will slow down the motor, which will reduce output, which will further slow down the system, eventually stalling out.
    How does this system prevent this from happening?
    The way i see it, it can be a near-free energy machine, if you add a battery pack to it, so that when drawn via the battery, the system isn't overloaded and stalled. And, it's not really ever free - maintaing it costs a bit, but ultimately, it would be much cheaper than the grid.
    If you want to help the planet, you should release the blueprints now, not when you reach millions of views/subscribers, otherwise, it just sounds like a cash grab on a "mystery machine" which is not really even what's promised. We've seen these snake oil scammers before, If this technology really works, don't be one!

    • @csud9540
      @csud9540 2 ปีที่แล้ว

      The patents are owned by an oil company, he releases the said blue prints, he’s a dead man walking.

    • @ferrofeles2063
      @ferrofeles2063 2 ปีที่แล้ว +1

      i agree a battery or capacitor hooked up would fix the issues of resistance though it did seem to ramp back up to speed quickly when he took the load off honestly id love to try this with an electric vehicle my only concern would be over heating of the motor running at maximum capacity like that is probably not great and he did say the bearings would need to be replaced in all of it every six months next ev build i do im trying this

    • @trillrifaxegrindor4411
      @trillrifaxegrindor4411 2 ปีที่แล้ว

      it doesnt...........................

    • @vankwisher
      @vankwisher 2 ปีที่แล้ว

      @@csud9540 He could release them via wikileaks

    • @JhonPhilippsBOY
      @JhonPhilippsBOY 2 ปีที่แล้ว

      I don't understand everything , but we need it ... and I agree your comment !

  • @michaelscullion3507
    @michaelscullion3507 2 ปีที่แล้ว

    its so obvious to me now, cant thank you enough for putting the together and putting it out for all. i got my magnets free reclaimed from a old hover board wheel !!

  • @jorgemarrero4610
    @jorgemarrero4610 2 ปีที่แล้ว

    Come es Que usas herramientas 120v en una toma de 220v? Por favor explicame

  • @Canadianhonkindiesel
    @Canadianhonkindiesel 2 ปีที่แล้ว +19

    Cool experiment. Unfortunately frequency regulation is important to inductive loads especially working in long term conditions. I think your 3phase idea will improve this or use a beefier motor with input frequency and voltage regulation. If I get some time I will check into this.

    • @patrickdoohan2951
      @patrickdoohan2951 2 ปีที่แล้ว

      Melodeon

    • @patrickdoohan2951
      @patrickdoohan2951 2 ปีที่แล้ว

      Will you get za shock from this unit

    • @JP-bd4zl
      @JP-bd4zl 2 ปีที่แล้ว +5

      Right on point!
      I agree! and not deterred! there would be plenty of ways to fine tune this concept
      And A Canadian trucker?
      You guys rock!
      WW celebrities!
      I'm almost a little star struck lol
      But in all sincerity there is a serious flood of honour and respect hitting Canadian truckers from every corner of the planet I can assure you I am in Australia!
      So Thank you from Australia
      And if you're not in support of the convoy?
      Fuck you from Australia!
      It was bloody good point you raised atleast, lol
      I'm off to the shed

    • @Ivan-tq4bx
      @Ivan-tq4bx 2 ปีที่แล้ว

      my friend you only want it for mine eth and btc .... don't be stupid jajja

    • @tonyfoxxbuilds1920
      @tonyfoxxbuilds1920 2 ปีที่แล้ว +3

      I just tried getting one to work. Not sure what I did wrong could be a lot of things but I was only getting 8v at 2500 rpm with 150hz. I used 24mm x 10mm x 5mm magnets. I only cut a slot in the teeth. So could there be interference? I removed the brushes so there's no load? Maybe I'm shorting the coil from scratches? The coils are bad to start? No idea....

  • @Kantorowski
    @Kantorowski 2 ปีที่แล้ว +5

    Interesting thing, but I'm waiting for the video with two alternators and a 20cv engine that you announced in public. Hope it will be inspiring ...

  • @melnovidroapicultor5915
    @melnovidroapicultor5915 2 ปีที่แล้ว

    So that, the phase motor is just producing mechanical force, isn´t it? May I use diferente type of motor for that? How long time the neodimio magnetic works? Do u already have some numbers about it? Thanks so much!

  • @boybini459
    @boybini459 ปีที่แล้ว

    This can go with 1100w (220V) engine, and 100 amper car alternador?

  • @gp8126
    @gp8126 2 ปีที่แล้ว +3

    Hi, will you please mount it on clear Perspex, can you show the power cover off, capacitor out of holder and fan cover off the single phase motor while walking around with it running?.
    Thanks

  • @PassivIncomeProject
    @PassivIncomeProject 2 ปีที่แล้ว +5

    Very very good, thank you for this great video. I love it. This is the answer for the people who don't believe it. Do you think I can connect this device to my house power? I use a PV system with a battery storage. Plug this into a power outlet and I can use it to fill my battery? Better said, can I use the device as a home power plant?

    • @MrGoogelaar
      @MrGoogelaar 2 ปีที่แล้ว +1

      You cannot use it as a power plant but it might work as a door stop. Do you really believe this nonsense?

    • @koraykaranfilci142
      @koraykaranfilci142 2 ปีที่แล้ว +1

      If this was possible ; we would see electric cars without battery ! 😆

  • @shuckarelli
    @shuckarelli 2 ปีที่แล้ว

    Ok so you soldered 3 wires to the alt and only hooked up 2 so what's the 3rd wire for?

  • @mattxrp
    @mattxrp ปีที่แล้ว

    Please can you tell me what grade the neodymium magnets are please.

  • @THEMFORMATION
    @THEMFORMATION 2 ปีที่แล้ว +10

    Do you prefer this setup compared to the high rpm washer rotor hyper drive?

    • @onetooneone4816
      @onetooneone4816 2 ปีที่แล้ว

      ello,did you find the way to make the Gerard Morin motor work?

    • @THEMFORMATION
      @THEMFORMATION 2 ปีที่แล้ว

      @@onetooneone4816 Am almost done will update when I finish. Have found 10 designs that should work perfectly. Plan on selling with my ductless split heat pumps.

    • @onetooneone4816
      @onetooneone4816 2 ปีที่แล้ว

      @@THEMFORMATION like to be in tuch whit you is that possible?

  • @renerene5128
    @renerene5128 2 ปีที่แล้ว +26

    Hello, GREAT Job !!! I want to try at home. Could you give us the technical specifications of the generator and the engine : RPM, Watts, VA etc... or photos of the signaletics plates ?
    Many thank's !

    • @JoelNSilva-mb1qs
      @JoelNSilva-mb1qs 2 ปีที่แล้ว +1

      Olá. Eu gostaria de saber se. Vc produz para venda se lhe encomendar e quanto custaria para manda para o Brasil. No Amazonas. Manaus

    • @ThinkingBetter
      @ThinkingBetter 2 ปีที่แล้ว

      I was thinking about making this with some 18650 batteries. Is this the type used in this setup? How long can this setup run on one charge?

  • @leonardomigazzi5331
    @leonardomigazzi5331 2 ปีที่แล้ว

    Buen día
    Estoy intentando a hacer mi generator magnético
    Estoy siguendo los paso
    Me sale imposible encuentrar un alternador 24v 200amp
    Cual usáis vosotros?
    Puedo usar 24v 175 amp?

  • @heinergieler1412
    @heinergieler1412 ปีที่แล้ว

    Thank you very much for your great video. How are the dimensions of the magnets and where can I find exact this magnets please? Do have a Link for me please? Thanks forward, best wishes and merry Christmas to you.

  • @jammgood
    @jammgood 2 ปีที่แล้ว +7

    great idea my friend! I have had a similar one in my head for years, but I did not run it in reality. I also have other ideas but they still only stay in my head :( great for the builder!

    • @jitala007
      @jitala007 2 ปีที่แล้ว +3

      It will work if you drain beer from your head😝😝

    • @ArtemisKitty
      @ArtemisKitty 2 ปีที่แล้ว +2

      Nobody has made one of these in reality. He is claiming efficiency greater than 100%. You can't create something out of nothing, ESPECIALLY energy. It is not possible for anything to exist at greater than 100% either. Mathematical AND basic physics laws stopping it there.
      Nothing can be >100%. This cannot exist unless that were possible, therefore this can never exist and never has/will. Mathematically impossible.

    • @seacaptian6955
      @seacaptian6955 2 ปีที่แล้ว +1

      @@ArtemisKitty you’re skeptical of this but believe trump was a great president 😂

    • @seacaptian6955
      @seacaptian6955 2 ปีที่แล้ว +1

      Same here, ive also been kicking around something similar but with much more horsepower by using cam actuated magnets timed around a larger generator, I’ve seen this same system in 70s and 80’s where the inventor suddenly disappeared , im pretty sure we would be flying cars and be so advanced by now if the Koch’s and other oil barons didnt hold us down

    • @ArtemisKitty
      @ArtemisKitty 2 ปีที่แล้ว

      @@seacaptian6955 Hey, I'm not even getting involved in your American politics, sorry. No preference for ANY of them, as that's your place to vote. I'll just watch and shake my head at the crazy news we keep getting from there.

  • @TheDjinn
    @TheDjinn 2 ปีที่แล้ว +9

    Amazing! Have you checked the stability of running 5 or more kWh for longer period of time

    • @wolfgangboettcher3126
      @wolfgangboettcher3126 2 ปีที่แล้ว +1

      In Arbeit

    • @Professor1568
      @Professor1568 2 ปีที่แล้ว

      @@wolfgangboettcher3126 Glaub ich nicht, denn da gibts nix zu testen was nicht vorhanden ist.

  • @alisonchirume9730
    @alisonchirume9730 ปีที่แล้ว

    As a young boy, I have always know and believed this very possible, and I was told not it won't work, but I have never accepted that it's not possible... Thank you for the proof I have been looking for

  • @puurenature
    @puurenature ปีที่แล้ว +1

    Thanks you for Your video! Great!
    I will try to make a copy.
    There is only one question left:
    Why did you clued 2 little magnets together instead of use one bigger magnet?
    Yours Manni

  • @newrenewableenergycontrol5724
    @newrenewableenergycontrol5724 2 ปีที่แล้ว +49

    In electronics college we had a light bulb mounted into the top center of a clear plexiglass box. And it lit! Some went 'ohhh ahhh but I did not buy it. As it turned out, the plexiglass had a film of gold on each side. It was so thin, you could not see it with a very strong magnifying glass. I will stand with the first law of thermodynamics. Energy can neither be created or destroyed. I would not send these people any money!😆😆😆

    • @cryptoice8063
      @cryptoice8063 2 ปีที่แล้ว +6

      Agreed, energy cannot be created nor destroyed, only transferred.

    • @manifest_with_vibration5726
      @manifest_with_vibration5726 2 ปีที่แล้ว +6

      I don’t believe they are asking for any money tho. But I agree you cannot create energy from nothing. It has to come from somewhere. It would be cool if more people were able to build this , and post videos as well. If multiple people have a working device it is far more likely to be true than if only one person has one.

    • @ferrofeles2063
      @ferrofeles2063 2 ปีที่แล้ว +2

      @@manifest_with_vibration5726 there are people who have done it

    • @ferrofeles2063
      @ferrofeles2063 2 ปีที่แล้ว +1

      i highly doubt that a thin film of gold would have done anything on that plexiglass block as he picked it up and carried it for over 40 seconds with no visible change in rpm pitch or volume which would have been noticeable with as large a motor he had also this doesn't violate thermo dynamics he is converting the magnetic energy of the permanent magnets inside into electricity and then into force thus creating a loop / cycle if there was a battery in the bottom i highly doubt he would have been physically able to lift the entirety of the item an electric motor like that is not light nor an alternator of that size add to that a battery large enough to power the thing and honestly you would be talking about 50 to 60 lbs of weight if not more and that's a low ball guesstimate

    • @newrenewableenergycontrol5724
      @newrenewableenergycontrol5724 2 ปีที่แล้ว +3

      @@ferrofeles2063 ​ You missed the point. The point is, with an unlimited amount of time people can come up with all kinds of things to hide what they are really doing. For example, I can show you a video where a man has his head completely blown off and it immediately grows back! (Men in Black). Did that really happen? Well you saw it for yourself, didn't you?
      But hey, if you want to send this guy a couple of hundred bucks, go for it! To Hell with science, I want the impossible! And to quote PT Barnum, "There is a sucker born every minute!"
      I think I will stick to the real science and leave the showmanship to the con artists!

  • @frankpatterson5843
    @frankpatterson5843 2 ปีที่แล้ว +5

    At what rate does the rpm drop as the wattage demand increases? Well done video.
    Can you demonstrate your IEE with a refrigerator plugged in for several day?

  • @vadimkot90
    @vadimkot90 2 ปีที่แล้ว

    Can I use less amps? Will it make difference. For example 80 amp alternator?