Speaking of “spring steel” I had to use a spring from a rustler to make a new pin. Mine came out. Other than that, great so far! They do “clunk” a little. Great video, my guy! Hope you have a great weekend!
@@texomarc DOH!!! The quality of steel used is very important but can't overcome a bad flaw. Hopefully it's a one off and MoFo takes care of you. This is my hesitation/frustration with ordering parts from there to up here in Canada. It's more expensive and a PITA if something fails. Return shipping and time makes it cost prohibitive so I might as well have just lit the money on fire. But when the LHS has sweet FA for selection, I'm stuck. Maybe post up here how MoFo helps out with the breakage.
MOfO& RC4WD provide more steering than stock axles can accommodate regardless of application. The axles need to be modified to allow for the upgrade potential and the steering rate adjusted accordingly.
Thanks a ton, we are glad to have you and I think everyone loves a good mail day (especially if it’s yours!!! Lol). We will definitely check out your recent video.
Thank you for the support and the shout. Excited to see what you do with this build.
Just need to get that cab from Corey! Lol
You'll have a total Mississippi build then!
@@aucrc-alwaysunderconstruct2765 I am thinking as much “quality” 3d printed stuff as I can on this build… hmmmm
Great vidéo 👍😉 what a great upgrade
They are pretty snazzy.
I trimmed back my axle housing a bit where the knuckle hits on both side and I seem to get a lot more steering
Yep, that will definitely help!
@@TheShopMiniRC I’m curious to see how much more it would be over stock
@@Brandon_Wallis with the mofo cvds, I bet it’s significant.
Great vid! Thanks for sharing! Cool channel on micro scale rc! Subbed!
Thanks a ton, I am glad to have you sub.
Speaking of “spring steel” I had to use a spring from a rustler to make a new pin. Mine came out. Other than that, great so far! They do “clunk” a little. Great video, my guy! Hope you have a great weekend!
Hahah resourcefulness is always a good thing! Thanks for the compliment and I hope you are also having a great weekend!!!
"Clunk" is concerning long term as clunk can quickly turn a part into what it rhymes with.....J...
@@wingnutbert9685
Broke! Snapped at the ball on the half shaft side. I get that the injora 50t is a pretty torquey motor but dangit!
@@texomarc DOH!!! The quality of steel used is very important but can't overcome a bad flaw. Hopefully it's a one off and MoFo takes care of you. This is my hesitation/frustration with ordering parts from there to up here in Canada. It's more expensive and a PITA if something fails. Return shipping and time makes it cost prohibitive so I might as well have just lit the money on fire. But when the LHS has sweet FA for selection, I'm stuck.
Maybe post up here how MoFo helps out with the breakage.
MOfO& RC4WD provide more steering than stock axles can accommodate regardless of application. The axles need to be modified to allow for the upgrade potential and the steering rate adjusted accordingly.
The RCAWD do not increase steering much over stock. But yes, they do a bit. The Mofo definitely do, but as you said, modifying the axles is key.
@@TheShopMiniRC You've piqued my curiosity re mod'ing the axles to improve them. Have you a how to vid on these mods, or can you make one? :) Thanks!
Wait was that a "dessicant packet do not eat" in that first black cage thing?
Hahhaha no. It was an AUCRC sticker.
60mm is the deadbolt light bar..
Thanks!
If you trim the steering knuckle you can get the same steering angle from the stock parts as the mofo rc cvd's!
And pop out your dog bones all the time. ;) but yes, you are correct.
Love mofo but these junk less i just got bad one but i broke both mine with in min
:(
New Subscriber here. Love the content. Mail days are my favorite. Check out my Mail Day video when you have a chance.
Thanks a ton, we are glad to have you and I think everyone loves a good mail day (especially if it’s yours!!! Lol). We will definitely check out your recent video.
Ahh sports cards! We collect MTG cards (a lot… over 25 years of them)