SolidWorks Tutorial
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- sw-tc.net/#228 ,SolidWorks Tutorial 228 : hydraulic floor jack
Keywords: cylinders, cylinders mating, linear & angular coupling, advanced surfacing, 3D sheets by surfacing, sheet metal bending , caster wheel, insertnig bolts, screws, pins, nuts, washers.
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►Facebook: / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel contains topics about:
SolidWorks Beginners Tutorials
SolidWorks Sketching
SolidWorks Surface
SolidWorks Weldments
SolidWorks Assembly
SolidWorks Drawing
SolidWorks Sheet Metal
SolidWorks Mold Design
SolidWorks Simulation
SolidWorks Motion
And MORE
►►►SUBSCRIBE ◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
■Facebook 2support:► / solidworks.tutorial.page
■Google+ 2add:► plus.google.co...
■Donation :► www.paypal.com...
Who ever you are, you're amazing. Thank you for all your work.
the best of solid works tutorial,I never seen before
Very well produced video. Thank you.
It would be great having the technical drawings so that we can train on our own.
Nice video shot, thanks for sharing it with us, well done :)
Thanks for all your fine work.
Fantástico! Assim que possível começarei o meu. Muito obrigado por disponibilizar tamanho projeto!
Great video my friend. Super talented you are.
you're a legend mate! you've saved my ass, had to do a hydraulic jack at uni, love you!
I was learning Pro/E (Creo) long time ago and they asked us to do this. I crashed under the useless Pro/E interface - Workplanes????? Ended up running to Inventor to just finish up. Didn't know about Solidworks back then.
3 hrs and no audio... ya that's awesome
Great video and presentation
thank you so much... Expecting more such assemblies
Love it! I'm wondering if you guys can teach us to make the fluid simulation on the hydraulic jack...
Thank you very much, great work !
Amazing Drawing
What's up, excellent video you've gotten in here.
Sir or Madam, I noticed you prefer to draw with surfacing and then thicken to desire thickness for a lot of your video. Is there a specific reason why you chose this method? It seems it would have been much easier to use the standard method of drawing a sketch and extruding it for the side plates. I always though surfacing techniques were best suited for shapes requiring splines and shapes which can no be easily produced with the sketch, extrude or cut technique.
Part 1: 0:00
Part 3: 31:00
Part 4: 49:08
Part 5: 51:45
Part 6: 1:01:43
Part 7: 1:10:19
Part 8: 1:16:06
Part 9: 1:20:25
Part 10: 1:24:09
Part 11: 1:27:56
Part 12: 1:30:50
Part 13: 1:34:25
Part 14: 1:39:13
Part 15: 1:42:18
Part 16: 1:47:14
Part 17: 1:50:30
Part 18: 1:53:46
Part 19: 1:54:22
Part 20: 1:57:24
Part 21: 1:58:27
Assembly: 2:01:55
People are doing those kind of fantastic stuffs and I am just sitting here and scratching my balls :/
I feel you bro
great work if you provide the drawings , it will be helpfull for those who learning from these .
mình rất thích cách mô phỏng của bạn!
thank for sharing
liked it , i prepare to design it on my channel
That is a very good job work like it lotting part gather
Is it possible to make the lift support rise in small increments with each sucessive pump? I'm having trouble replicating that motion since the assembly would have to stay still while the lever rises and then move again upon loading it.
Great video btw it helped me a lot!
Nice Tutorial, but engineering wise, there are some issues that are missing. Example, the rectangle object you created in the parts that is to be placed in the middle with the screw( you forget). The free metal plates have to have a cylindrical connection with a screw.. etc
MUITO TOP!
Thanks
The siloword pro player, thank you author
Explanation along with modelling would be better. Explanation should be about why the shape is like that what is the reason behind it and stuff.
These videos would be a lot easier to watch if there was audio commentary explaining what you're doing
Hello i have a solidworks project and i loved your videos ,i'd ask you for your blueprints of this mechanism please. Reply ASAP thank you !
Good
❤❤❤❤Excellent ❤❤❤❤
I'm trying to design something similar to your jack but my dimensions are different. what can I do to follow your step-by-step videos using my dimensions to get an aligned and working model. my dimensions are as follows:
Jack Length 555 mm
Width 240 mm
Height 200 mm
Height of saddle from floor (minimum) 85 mm
Height of saddle from floor (maximum) 358 mm
Saddle cup diameter 95 mm
Can you do a tutorial on how to make a sneaker on solidworks
It was 3 hours to do this.
oh my gosh
Immediately it is clear that he was tired of drawing this jack !!
Bravo 👏👍
Сразу видно, что он устал рисовать этот домкрат !!
Hola, perdona que no hable inglés,soy bastante malo. Podrías pasar los planos o colgarlos para descarga por favor?
That's great work! How do I get in contact with you?
Not bad.Why not sheet metal instead of extrudes and fillets it can be done way easier with bends and punches IMHO
Would it be possible to get all the parts for this jack, so that they could be given to a college class in ordered that they practice all the "mates" shown in this video?
cool
ENJOYED, I ASK YOU ONCE YOU PLACE A LINK WHERE WE CAN DOWNLOAD ALL THE COMPONENTS IN PDF SO THAT WE CAN PRINT OR ACCESS DIRECTLY ON THE HD, NOT ONLY THIS EXERCISE BUT OF ALL OTHERS.
THANK YOU
we can set the location of forming tools.my question is how to set the size of forming tool like embose or lance.plz sir reply
Where could I get/find a list of the parts and respective dimensions of this jack?
Did you found it ? If yes then please can you drop that link!
Hi, Where can we get the documentation of the project. If it's not posted yet can you make it available send it to me
And part 13?
Can we get deatailed drawings for practice
Nothing can be accomplished without the hope of accomplishment. Jennifer Arnold, Physician
test for maximum weight it lift can be simulated?
finite element analysis
Are the measurements in centimeters?
can you do a juicer on sw thatd be nice
I would like to aske if you do not mind the dimter of smal dimter and the big dimeter .
Hi, do you still have the hydraulic jack? Can you send it to me? A greeting.
que bacano
I'm kind of new in Solidworks, somebody knows if I can use this models to do simulation? Or if a model/assembly requires any further configuration to do some stress simulation for example?
Thanks
i need this software can someone help me get it
It willl be an 8... when i try to do it not every mesure and assembly works the same as you show
for my part it worked well with solid works 2018
Sir,
I would like a very important advise on the fact that my "Solid Works" has to be run on my laptop......and since it's getting old I am buying a new one.I would like to have your advise that is CPU( say 3.7 vs 4 Ghz) more important over storage( 516 SSD vs 1TB correspondingly).....for "Simulation".Please,I need an advice from an expert like you.
PS:I don't have the option to use a desktop for some reason
s so it has to be a laptop.
Is there any blueprints?
классно так
Cuántas piezas son?
why there is no audio??
finite element analysis
When I do the pin operation (1:53:10) I get an error (Solidworks 2016), what could it be?
Go to options and select merge tangent faces or use specify twist value, degrees, 90
Where do I get the computer program to do these kind of animated drawings
This program is about $5000 and is not the best program for animation setup. It has a very long and steep learning curve. If you are willing to learn the program and are a veteran you can get a free one year copy from SolidWorks
(SW19) did anybody else receive a rebuild error with part 17 (hitch pin)?
how to solve it? the swept boss/base doesn't work for me
@@DeadOnePower I think he did the order wrong, when you want to use that feature, first you have to click on the circle did after the lines (the sweep profile). After that you click on the lines (path)
Which App download in laptop
Where can I get the drawings of your drawings?
I wish there was a voiceover
Chúc ai đọc được comment này của mình Xin top 5000😁😁😁😁
SoildsWorks 2016 and 2015 Dowland link pls SolidWorks Tutorial
For more tutorial about Solidworks 2015 and 2016 .Service park SP 3. follow my channel and Subscribe for more helpful hint to improve your skill
Mantaaapppp
uffff buenardoo
website not working
I drew the same
這什麼機器呀
Usta bunun teknik resmi varmı
1:27:52
2:01:55
Dimenssions are missing update it
Dimension spelling is wrong correct it
@@jaganmech15 spelling is not at all just understand my words
If you found dimensions then can you give it to me ? Thanks for the help
Macho me estas quitando las ganas d vivir
51:39
Give me this in creo
th-cam.com/video/zoxaIwF9xuk/w-d-xo.html
parts designs can pass
how many ads omg.
c'est de la sorcellerie machin chose
The solid part of the bolts are not long enough.
In real life you’d better cut the end of the ‘ screw part’ so that part doesn’t stick out..
For the rest I’d say.. good job..
2:48:43 thiếu óc kìa
Я гей
vk mày xinh gái thế @@
Hydraulic floor jack easy for drawing and assembly. Thanks
Great video and presentation
Cuantas piezas son?
21 en total