The construction method and I believe the materials are similar to kayaks, main difference is the kayaks aren't foam filled to keep the weight down. You can always fill a kayak with foam yourself, but you will probably regret it.
I'm not a seller, I'm a owner of a plastic PTE (polyethylene) kayak and about to buy a PTE boat, the plastic is uv protected and stabilized, I own a kayak that is more than 4 years old and with a lot of use with no problem at all, not even colour fading, but you can increase the UV protection by aplying UV protection wax. Maintenence needed is just like any other boat, wash it after use and if you keep it outside cover it. Another advantage is that you can repair it yourself, if you scratch or cut the PTE, you can use a hotgun and PTE rods to weld or smooth it, there are youtube vídeos teaching how to do those repairs. No osmose, no floats to be repaired or replaced, no special and toxic resins to repair, yep it is that simple and easy to have one PTE boat or kayak. These boats are not a novelty they have been in production in the northern european countries for decades, check the norwegian company pionerboat.com, recently they became more attractive because of all the advantages over fiberglass and metal boats, and to the fact that they are 100% recyclable.
Give me a full top transom, and a long leg motor, that makes me a happy camper. Just when I get on the water, I like the water to be further from inside the boat, the better. Just my quirks, and I’ve had water trying to get in the boat, didn’t like it!
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
really ! they said that about the TITANIC,
this an't the titanic, you could blow this boat to pieces and the pieces will all float
You know boston whaler has been doing this since the beginning of time
Yeah this is copied from Boston whaler,stupid
Boston whaler left the engine on when they cut in half in the 1950’s.
I hope they have them here in the US, for what I need it's perfect
polycraft boats is in the USA if you still need something like this
Boston whalers are too expensive. But this is a better design hull
FYI there is a 4200 (14 Feet) center console with a 50 HP Merc 4 stroke is listed in Australia for around 22,000 ASU (17,000 USD) to give you an idea.
Are these available in the United States and if so where ?
Berapa ringgit you nak jual?9
You did not cut it in half with a motor on it. Will it sink if you do?
Too bad this stuff wasn’t available in 1912.😳🙄😮
Beautiful the perfect boat.
Where is the motor during the test.
I would like to see this into a super kayak
The construction method and I believe the materials are similar to kayaks, main difference is the kayaks aren't foam filled to keep the weight down. You can always fill a kayak with foam yourself, but you will probably regret it.
Is there an optional floor?
Too expensive, buy 2 aluminum boats, one to use and the other to clean weakly..
why this boat dont shot its ads during stormy seas.what real boat is during that season.
How to order this kind of boat here in the Philippines pls reply
How much the boat Indian rupee Thajudeen from Kerala
dIDN'T bOSTON wHALER DO THAT 40 YEARS AGO?
Hai...l like to ask...if you hava a dealer somewhere around Malaysia
How does the polyethylene hull hold up to the sun's U.V. rays?
any answers?
I'm not a seller, I'm a owner of a plastic PTE (polyethylene) kayak and about to buy a PTE boat, the plastic is uv protected and stabilized, I own a kayak that is more than 4 years old and with a lot of use with no problem at all, not even colour fading, but you can increase the UV protection by aplying UV protection wax.
Maintenence needed is just like any other boat, wash it after use and if you keep it outside cover it.
Another advantage is that you can repair it yourself, if you scratch or cut the PTE, you can use a hotgun and PTE rods to weld or smooth it, there are youtube vídeos teaching how to do those repairs.
No osmose, no floats to be repaired or replaced, no special and toxic resins to repair, yep it is that simple and easy to have one PTE boat or kayak.
These boats are not a novelty they have been in production in the northern european countries for decades, check the norwegian company pionerboat.com, recently they became more attractive because of all the advantages over fiberglass and metal boats, and to the fact that they are 100% recyclable.
Hi are these boats only in nz?
Give me a full top transom, and a long leg motor, that makes me a happy camper. Just when I get on the water, I like the water to be further from inside the boat, the better. Just my quirks, and I’ve had water trying to get in the boat, didn’t like it!
They are very dry boats even in the rough.
How does this boat compare to Boston Whaler’s smaller boats?
Good boat.👍
Is this available in Malaysia..?
otw
How much??? For a 17footer. Can you ship to philippines?
I mean, do you have markets here in philippines? If have, How much per unit?
didn't get to see full drop!!!
Can you name me the renowned local dealers of Smartwave boats in Bintulu,Sarawak,Malaysia.,please ! TQVM.
Love mine!!!
How much is this...
Is this a availabe in the U.S.?
Check with you local dealer
better than inflatable boat
Benefit is that the "paint" lasts longer that's about it.
If they are so confident why only 2 years
probably is not UV protected, HDPE UV protected is blacka as long as I understand
Der Eindruck ist wirklich sehr gut
那里可以买到在法国
Are these available in the philippines
otw
But wait,,,,theres more.lol
Nice🌱
I want one
.
Tricycle
Availability in Philippines?
Juan Am I available in Phillipines ??
Who use tin or glass on a boat?
fiber glass
Aka aluminum boat
What is the cost for one unit of smartwave boat in Malaysia ?
Enquire at your local dealer
What's the boat made of? Is it durable?
stated in this video, Polyethylene.