I’m trying to connect HHTwin on the bench with the yellow socket ECU for a W463. I know the truck has the old 16 pin box, not the 38 pin round socket. I have tried to use the banana plug cable for 6 hours to no avail. Now I’m trying the 38 pin cable also to no avail with pin 1 ground, pin 2 (ignition) and 3 - 12V, pin 4 - K-Line. It doesn’t connect. Can you explain what I’m doing wrong?
If I follow exactly everything from this video would it work on MSE H02 black sockets ? I mean do I change eeprom settings same way and bytes you did ??
We always recommend that you follow our manuals, not the videos. Because the manuals are always the most up-to-date. For your ECU with black sockets, the procedure is different from the video for yellow sockets. The procedure for your ECU can be found on page 5 of this manual: carlabimmo.com/manuals/immobilizers/mercedes/mercedes-2.pdf
@@stadobgil4792 If you mean ECU VDO MSE with black sockets, the procedure for this ECU is on page 5 of this manual: carlabimmo.com/manuals/immobilizers/mercedes/mercedes-2.pdf
I tried changing byte 27 to 33 and bytes 50-55 to 02 03 00 FF 00 20 like you show in your video but HHTwin won't let me change the VIN. What am I doing wrong?
The video is for reference only, the emulator installation procedure should not be performed on its basis. You must install the emulator according to the PDF manuals, because they are constantly updated and the videos are not. For instructions on how to use the emulator in your ECU, see page 7 of this manual: carlabimmo.com/manuals/immobilizers/mercedes/mercedes-2.pdf
@@CarLabImmoTechnicalChannelThank you for your reply. This pushed me even harder to try and find a solution on my own. In fact, I managed to virginize and change the VIN after all without using your emulator. The engine starts again and the car is saved from going to the junk yard.
Hello. edited eeprom 24c02. made all the necessary connections. When connected to HFM ME2, stardiagnosis writes to turn on the ignition. But everything is included. what am I doing wrong?
Can you contact me via email? I'll try to help. Please send the changed file, photos of your ECU label, plug and board. My email: nicole@carlabimmo.com
in minute 4:26 can diagnose thru the 38 pin with obd?what obd can use?can use thinkdiag brand?
We have created a list of tools recommended by us, check it out please: carlabimmo.com/download/materials/recommended-tools.pdf
Can I remove the immo if i dont have the original key and don't have the ignition switch?
in minute 4:26 what software you use?any obd cheap can do the same like what you do?plz reply tq
This is Star Diagnosis.
I’m trying to connect HHTwin on the bench with the yellow socket ECU for a W463. I know the truck has the old 16 pin box, not the 38 pin round socket. I have tried to use the banana plug cable for 6 hours to no avail. Now I’m trying the 38 pin cable also to no avail with pin 1 ground, pin 2 (ignition) and 3 - 12V, pin 4 - K-Line. It doesn’t connect.
Can you explain what I’m doing wrong?
Se puede realizar la personalización con otro software u otro equipo ??
Siempre usamos Star Diagnosis para hacer personalización, no podemos garantizar que esto se hará correctamente con otro software.
Wow what programmer is that i mean the eprom adapter and how did you turned on and of the ignition?
The adapter is handmade. But you can buy one where you usually buy a programmer.
Godiag GT100 is the cheapest solution.
Where is Wsp module to cut can lines?
It depends on the car model, you can check on the Internet where the WSP module should be located in your car model.
If I follow exactly everything from this video would it work on MSE H02 black sockets ? I mean do I change eeprom settings same way and bytes you did ??
We always recommend that you follow our manuals, not the videos. Because the manuals are always the most up-to-date.
For your ECU with black sockets, the procedure is different from the video for yellow sockets. The procedure for your ECU can be found on page 5 of this manual: carlabimmo.com/manuals/immobilizers/mercedes/mercedes-2.pdf
@@CarLabImmoTechnicalChannel can you send me a link to a manual for ecu mentioned above please
@@stadobgil4792 If you mean ECU VDO MSE with black sockets, the procedure for this ECU is on page 5 of this manual: carlabimmo.com/manuals/immobilizers/mercedes/mercedes-2.pdf
hello, I needed the pinout of this ecu, would you?
Hello, you can find the pinout here: carlabimmo.com/manuals/immobilizers/mercedes/mercedes-2.pdf
I tried changing byte 27 to 33 and bytes 50-55 to 02 03 00 FF 00 20 like you show in your video but HHTwin won't let me change the VIN. What am I doing wrong?
The video is for reference only, the emulator installation procedure should not be performed on its basis. You must install the emulator according to the PDF manuals, because they are constantly updated and the videos are not.
For instructions on how to use the emulator in your ECU, see page 7 of this manual: carlabimmo.com/manuals/immobilizers/mercedes/mercedes-2.pdf
@@CarLabImmoTechnicalChannelThank you for your reply. This pushed me even harder to try and find a solution on my own.
In fact, I managed to virginize and change the VIN after all without using your emulator. The engine starts again and the car is saved from going to the junk yard.
Hello. edited eeprom 24c02. made all the necessary connections. When connected to HFM ME2, stardiagnosis writes to turn on the ignition. But everything is included. what am I doing wrong?
connected to 38pin connector: 1 pin - gnd, 3 pin - + 12V, 4 pin - k-line
found two ways to set software jumpers on your device 1) J6, 2) J1, J2, J3, J4, J5. which way should you use?
Can you contact me via email? I'll try to help. Please send the changed file, photos of your ECU label, plug and board. My email: nicole@carlabimmo.com
Can I start without Personalization?
No, personalization is required.
I think possible if you know syncrode code the engine ECU
high level knowledge....
Thank you!
Добрый день как правильно установить Julie Emulator 2-разъема (белых) VDO ECU с памятью 24c02
Hi is this emulator working with Siemens Sim4 Le , w208 clk 2.3 kompressor
Hi, what is the ECU number?
I get the message "Coding could not be performed"
Did you read the coding number before making changes to memory ?
@@CarLabImmoTechnicalChannel Yes
@@НИВАВЕЗДЕХОД Please contact me for help via email: nicole@carlabimmo.com or by message on our Facebook page: facebook.com/carlabimmo/
@@CarLabImmoTechnicalChannel wrote to the mail
@@НИВАВЕЗДЕХОД I have not received any email.
Можно получить инструкцию по установки я купил Julie Emulator В rolexauto.ru Вчера !