Replace the Rear Wiper Arm: HOW TO ESCAPE
ฝัง
- เผยแพร่เมื่อ 25 มิ.ย. 2024
- AMAZON LINKS:
Rear Wiper Arm Assembly: amzn.to/2We5pHH
Puller Tool (similar): amzn.to/42amjGn
LocTite: amzn.to/3gRLlmh
AMAZON STOREFRONT: www.amazon.com/shop/howtoesca...
BLOG POST: howtoescapewithrahrena.weebly...
Is your rear wiper arm loose? Dangling? No longer gripped to the motor shaft? Or perhaps it's still intact to the shaft, but you found a ton of corrosion and even a crack in the plastic wiper arm itself?
This is a full step process of removing a (very) stuck wiper arm without damaging the motor. In this video you'll see how we progressed through simple to complex pulling and removal without the need for cutting or destroying anything.
Check out the amazon links (they're affiliates, so anything you buy through these links supports the channel- thank you for that!) and please let me know if you have any questions or comments in the COMMENTS section below.
Thanks so much and good luck!
#rearwiperreplacement #diy #howto #howtoescapewithrahrena #rahrena #howtoreplacearearwiperarm #wiperarmreplacement #2013fordescape #2014fordescape #2015fordescape #2016fordescape
Awesome man thanks a million man!!! saved me hundreds of dollars. one shop said $180 paid $100 for everything and had a blast with my son fixing the back windshield wipers.
Thanks for the video I'm working on a 2001 expedition and I was having a hard time getting the old wiper blade assembly off now I know that I need that tool Thank God I didn't get too far into it to where I started breaking stuff
Your video was the most comprehensive and informative. I've seen others, but not as thorough as yours. Especially, giving numerous useful tips in removing the arm initially was extremely helpful. Not many have gone through or given thoughts to all those points.
thanks a lot @jtbtabimono- I appreciate you taking the time to post the comment and let us know- the goal of this channel is to help us all get to know our Escapes a bit more and be thinking about things from a proactive perspective when it's so easy to just want to immediately dive right in and bang out the solution. Please let us know if there's anything else we can help with and hopefully we can :) Have a great night.
Ain’t a single video show how too put the spring part in tho
Excellent cautions about getting stuck screw off. I was successful in replacing the rear wiper assembly on my Ford Flex
Thank you so much for this video; instruction worked very well on my Jeep Cherokee 2016! It is the exact same process, and none of the video I had seen on mt truck was showing how to use correctly the puller tool. And the Locktite suggestion is genius. Great tutorial!
Super helpful. Made a job I expected to be complicate simple. I'll be using the info to change the wiper blade on a Lincoln MKX.
Easy, clear, concise instructions to follow. If only everyone could post like this! Well done and thank you 👍
Thank you so much!! All of the extra tips are great. The best video yet.
Great video! I used the PB blaster and the back of a hammer to pry up the wiper arm. Worked well without breaking
Thanks for the video! Didn’t want to go out and buy a puller, but that’s better then a new motor assembly.
Hey Stephen! Glad it was helpful, and yeah, a puller can sometimes be just what you need. In this case, it certainly saved MY motor as well. Please let me know if there's anything else I can help with and have a great start to your week!
Great video and good attention to detail. I can now go ahead an order a spare online and thus save a trip to service center. Thanks a lot 👍
Super-clear and helpfu - nice vid!
Hey thanks a lot for the feedback and for taking the time to comment! I appreciate it!
Really helpful video. Excellent.
Thanx for the info. I'm changing out a rear wiper arm on a 2010 BMW X3
Great to know this same approach translates across other vehicles- thanks for the feedback and nice job!
Thank you
I was surprised to see that it’s only 20 $
I’ve been driving a couple years without it.
But I will definitely do it now 😎
Thank you so much. Your video helped a lot.
Superb job made it look easy we'll done
Thank you, so simple. 😊
This helped a ton
Thanks - your advice worked a treat.
Great to hear!
El mejor video hasta ahora, best video so far
Good job
Thank you!
Thanks dude. Just fixed mine
Thank you so much for your help, really worth it. God Bless you.
Thank you!! Nice video, my 2014 broke.
Thanks for information
Thanks so much for the video! My wiper arm was stuck on my '16 Explorer.
Great vid..trying to do this on a VW up
Great tool
Glad you were able to use it for your VW! It's a pretty universal procedure- yes the puller tool is super useful! Thanks for taking the time to comment :)
That was the easiest part to replace on my vehicle. Thanks for the tutorial.
Awesome! Glad it was a quick one for you- just curious- what kind of vehicle? Thanks for the feedback :)
Thanks! The nut was easy to remove but I was having trouble removing the assembly from the shaft. I came to this video to see if it's safe to use a tool like you used. Thanks 🍻
Thank you - I originally found your video because somebody else posted it on their channel without attribution. Anyway, I lost the arm and spring in a conveyor belt car wash today, but they retrieved it for me. I was able to reattach the spring on both ends without removing the assembly by freezing the video at 4:03 and noting how the spring hooked the two other two pieces of the assembly. Edit: I have a 2019 Explorer. The manager thought I would have to get the Ford dealer to reinstall it.
My Lincoln MKT rear wiper arm with wiper and passenger side view mirror was vandalized on December 4, 2021 in Brooklyn, New York and broken during the night when my car was parked at Kings Highway & 22 St. A number of other cars were also vandalized and broken. This video helped me perfectly in details how to mount the wiper arm. Thank you so much, sir. Appreciated. God bless you and your family.😍😍👍👍🌹🌹
Hi and thank you for sharing and for your feedback- That is awful that happened to your vehicle but I'm glad you were able to get it repaired and on your own to save some cash! I hope you don't have any more events like that and Happy Holidays!
@@HowToEscapeDIYTipsandReviews Happy holidays to you as well, sir.
Thank you for pointing out the marking of the angle of the blade tip position. I fitted mine without marking the tip and the wiper ended up going beyond the screen.
No problem- glad it was helpful! Thanks for the feedback and taking the time to comment!!!
Thank you
Thank you worked great
Awesome, Barbara! Glad you could get the job done! Thanks for taking the time to say something- have a great weekend :)
Thank you for this info
No problem David- thanks for taking the time to comment!
Thank you.
Thanks!
Very Good thank you 👍
Thank you for the feedback and encouragement, Kathy! Glad it was helpful!
Very good and informative video. In most case, the pulling tool is not needed. Take off the nut. Let the WD-40 soak for a few minutes. Then simply turn on wiper, the twisting force will force the wiper arm loosen.
Oh cool! Thats good advice! I didn't even think to try that- good call Joe! Thanks for the comment and for checking out the channel!
Gonna try this in the morning, hope it works.
I tried this without avail. Any ideas?
Very useful. I need a pulling tool now.
My replacement hole on my assembly is smaller, i take it the metal is softer and gets bigger as i put it on.
Thanks
Excellent!
Thank you for the feedback!
Helpful thank you, on mine the compression spring under the arm had rusted and snapped, when I removed the nut the arm
Was stuck on probably from corrosion. Left on some wd40 for a bit to soak
Cool thanks
Thanks man!
Just bought a car and it has a broken rear wiper. So thanks to you now I know how to fix it.
Awesome! Glad this video was helpful- did you end up getting it fixed??? Thanks for the comment!
@@HowToEscapeDIYTipsandReviews it works like a charm. Thanks!
Thanks... My wiper was good but I was putting a vinyl flag decal on the back window and needed to get the arm off in order to properly position the decal.
Awesome- hope the decal turned out great and glad this was helpful for the process! have a good one Jim!
THANK YOU!!!👊🏾👊🏾
Hope it helped!!!
@@HowToEscapeDIYTipsandReviews it did!
This helped and gave you a 'like' but personally I had the spline with the tapered threading on the side which it wasn't obvious if I should pull it off the shaft. My old wiper/arm had the plastic crack and came right off but when it came time to loosen the bolt and slide on the new arm it wasn't fitting with the spline there. So I wasn't sure if I had the wrong part or that piece also needed to be pulled off. I think a mention of the spline would be really a key piece of information that would be really helpful. I ended up using the 'puller' tool and the spline popped right off and the rest was trivial
Thanks for the video....I ended up going to O'REILLY'S and they had the gear puller....just about the same cost.... maybe a few cents cheaper. It was easy, I changed my wiper blade with ease
That rocks!!!
Nice work! Glad it was nice and easy for you, man!
The puller was the top tip for me!
It does make all the difference!
I have also used a heat gun on stubborn ones. Seems to work if the puller isn’t quite enough
Ahhh this was beautiful, right to the point and cure, i would love to know if you have a video on the reason the back up camera turns on and off, like it works when it feels like it.
Works for 2004 BMW x3 E83 as well. Just make sure you mount the wiper in opposite direction to this video. Also, If you don't want to invest in a pull tool you can try use a screwdriver and rag (to protect paint) and pry carefully. Thanks for helpful vid!
Nice- thanks for the feedback and the heads up to others with a BMW X3- thanks for the comment!
I used a pair of channel locks and put them on the left side and rotated the entire blade and it came unstuck from the bolt
I had got that tool but mine was so stuck the tool bent. Advanced auto parts had another one for wiper blades. But it had a hand crank knob. I got a 8mm 1.25 bolt and put that in the tool and used my socket wrench to turn it much easier heh. It came right off.
Good info. However, my 2013 Escape SE rear wiper blade had a snap slot with about a 1/4" slide in the slot. So the blade would snap on then slide about a 1/4" to set the pin (slide the blade towards the arm spindle to set). I didn't know this. Needless to say, using a screwdriver to pop off the blade also broke the pin on the arm. Had to order a new wiper arm and of course could not get it off the spindle. Using a puller actually pulled the plastic off of the bushing so had to cut the bushing to remove it from the spindle.
Merci
Had to cut the bushing in half with a Dremel on both sides and then pop both halves off with a flat head screwdriver. Puller wasn’t budging it. I used a small disc to not risk getting near the glass.
I hear you on that... they're pretty tough to get off sometimes. Glad you worked it out and could get it all swapped out!
That's where I am with mine. I bent the puller jaw. The salt corrosion feels like it was weld on. Oh well dremel it is
have you tried using a small bracket between the tools screw and the screw holding the wiper arm? it makes it much easier since the tool screw just wants to get off the screw holding the wiper
I've just purchased a Nissan Micra MKIII rear wiper arm. I really hope this video helps me out 😃
Nice! How did it turn out? Did it work?
@@HowToEscapeDIYTipsandReviews unfortunately, the aluminium had ceased so we sawed it off😂😂 luckily, the new wiper arm had brass instead of aluminium but we also put plenty of copper grease. This was really helpful by the way!
@@MAH-89 Hah! Good idea- yeah these things have such tiny splines, different materials in contact, and they have wiper fluid and the elements all over the place... it's no wonder they get so jammed with gunk and crud and sieze up.. glad you got yours fixed and how you're happy with it. Appreciate the feedback and checking in!
@@HowToEscapeDIYTipsandReviews anytime bud!😃 thanks once again
This was super helpful since a car wash broke my rear wiper arm off my Escape just yesterday. ::sigh::
I'm sorry to hear that your wiper broke in the car wash- that stinks. So you did get it fixed then? Glad you were able to find this video helpful :) Thanks for leaving the comment!
@@HowToEscapeDIYTipsandReviews I have the arm and the new blade ready to go. The puller and glue should be here tomorrow. I was ready to get it all taken care of today, but couldn't get the arm off the post - whomp, whomp. The puller should solve that issue.
@@whitneyalovelady3579 ah! Well as you can see in the video we had the same issue:) hope its a quick process for you!
this is exactly what happened to me, this video helped me fix mine today!
I followed these instructions to a tee and everything worked great! We even got a heavy rain over the weekend that let me test it - hahaha. THANK YOU!!
Legend!
Hah! Thanks for the chuckle- hope it was helpful and let us know if you need assistance with anything else- hopefully we can help!
Thanks, got the same problem on my Escape. The motor is turning but the wiper just hangs there so It's worn out inside. Now I know how to get it off. Merci!
If you leave the nut on the shaft it will help keep the screw on the puller centered
This is so smart. Thanks.
👍Merci beaucoup
Great video! Now that summer is here, I would love to see a video on troubleshooting ac problems. I have a '13 escape titanium and it's blowing hot air. Makes driving unbearable!
Ugh totally understandable... my sister in law is having a similar issue with their 2013 SEL. is yours consistently failing to push cold air or every now and then?
@@HowToEscapeDIYTipsandReviews its starts off cool for a few minutes then is just hot/outside temperature. It's constant.
Alright well at least a constant issue can be diagnosed instead of chasing random occurrences! I'll post something shortly! Thanks for the request:)
Try this, it may help with your AC.... th-cam.com/video/k0EToZjmTO8/w-d-xo.html
Great vid. Informative and quick. Is the thread lock necessary when installing the new arm?
Hey, thanks Eddie! No, it's not necessary- I just felt good about using it since I had sprayed a lot of penetrating oil on mine and didn't want the nut to loosen up with the residue I couldn't clean off 100%.
A mechanic just tried to charge me $200 for the arm and to put it on my truck. He said that was a deal. I told him "No, that's not a deal. That's extremely overpriced just to change a rear window wiper arm. I told him I can get the arm off Amazon and all the other stuff I need for less than $50 and put it on myself watching a TH-cam video and I did just that. Yes, I'm a female and that mechanic tried to bamboozle me but I'm gonna always check around anyways when that price isn't sounding right. Thanks for the video. It helped me a lot!!! 👍😁
THAT'S AWESOME!!! Well done! Way to stick to your guns and get it taken care of. Thanks for sharing!
Will this wiper arm fit on a cord focus. Most focus and escape parts are interchangeable so I wanna know if I should go to your Amazon list and buy it for my 2012 focus hatchback
Put nut barely back on bolt and take channel locks to top of nut and behind wiper arm and squeeze the channel locks. Arm pops right off!
I like your video. Very clear but my old arm is really stuck. I have the puller but that didn’t work
Tomorrow. I will try to cut the metal hub with a dremel tool
Hey Tale- thanks for checking in on your rear wiper- did you finish the job? How did the dremel go? Eager to find out how it turned out. Thanks for taking the time to share and for subscribing to the channel!
What size is the nut that goes on top though and right under the cap? I think I threw mine away on accident a while ago since mine has been corroded for years i just couldn’t find the right video for some reason?
Might have to get a puller. My thing was stuck just like that
Thanks for saying don't use regular pliers because that's what I was gonna use
what size puller you used?
Appreciate the video! A quick question. My rear wiper arm looks similar to yours, but unfortunately my old arm has a hose for the wiper fluid and its being held together by a few clips that are not built onto the new arm.. Any tips, tricks or suggetions on what i could do about it?
Hmm that is interesting- you MIGHT be able to take the arm off and hide the hose inside the arched structure of the arm. You could also look at lawn sprinkler /garden irrigation nozzles from the hardware store to mount to the end of the hose and act as the sprayer to fan out the fluid before wiping. I'm not sure how much room would be left for your hose but I would think you could use a Dremel to maybe cut out a path for the hose then epoxy or zip tie it in place somehow...this would all be with the arm off the vehicle of course. Then maybe get an in-line connector to rejoin it to your vehicle's fluid line when you go to install it so it is a modular setup?
2 more tools you will probably need if you live North of Tennessee is 1. Channel Locks 2. Lots of patience.
So, what if the nut under the wiper is seized on? The new wiper wont fit on with it there. It wont move to slide off.
Could you tell me what size nut is used? I somehow lost the original, and went for 5/16 (didn't fit), m9 (metric, also didn't fit). I got both coarse and fine thread assortments of nuts that seem to fit, but are tight when threading, and I don't want to do damage. Any help is appreciated!
13mm @ 1.59
I'm from India same issue I'm facing wiper arm not coming out its Jam completely.
And I don't have a tool like you to pull it out. Please suggest me some another way
Be very careful because the underside edge of the nut cover is very, very sharp and is held down with strong vertical spring tension!! Wear protective gloves when dealing with it! I'm lucky I didn't suffer a major cut on my finger or worse when I recently performed the above task and with me it occurred while struggling trying to remove the "stuck" wiper blade arm from the motor...before finding this video!!
Why the hell are all these wipers getting stuck, really bad QC on fords part.
Good work. That tool seems to be handy. This damn things has often sit for a looong time so they can be really stucked.
Thanks! Absolutely- the bushing can really get fused on those splines. It gets a good bite to start with but it's like cement from there :) Thanks for commenting and please let us know if there's something else you're looking for with your Escape!
Would it be fine to apply copper antiseize instead of threadlock where the bolt tightens?
good question- I think yes on where the straight splines go into the brass nut of the wiper arm so that it doesn't get stuck again in the future, but no, you do not want to put it on the threads of the actual nut otherwise you could risk it loosening and coming off over time with vibration. You want that nut on there snug or else the wiper arm will lift off the motor post and hang loosely downward or strip out the splines.
Do I need to remove my terminal from my battery. To do this?
My bottom part (nearest the rotation mechanism) hasn't come off. It's the other part I'm missing. The longer part that connects to the shorter bit. I hope I can just click the one to the other.
Autoboo has the best wipers
Careful pulling tools can destroy the bolt if you have the wrong pull tool. Some have a pin point and it will destroy it. Find the flat blot pulling tool
Thanks for the details there- just curious what happens to the bolt/motor post with the pointed pullers? Does it expand from the tip pushing inward?
WOW, If the thread locker ran down to the wiper arm.... You Will NEVER get it off again....
TIP::::: Put the nut on the stud First, Then put a tiny drop on the nut threads.......
Please Think when using thread Locker!!!!
Hi I just replaced my wiper arm and now the motor will not turn it it just makes this grinding noise. Do you know what I can do to fix this?
oof- Hi Matt- thanks for checking in. This motor is a gear motor - I believe it is a worm gear that turns a main sprocket for a ton of torque for the wiper. Sounds like the gear teeth on either component may have stripped, especially if you're hearing a grinding noise. If you put your hand on it do you feel it vibrate when it grinds and does it only grind when the wiper should be traveling? I haven't ever done a replacement on my Escape, but I do know you can find a replacement one here for a decent price ( Rock Auto) . It may not be that challenging of a job either, but just time to get to it. Please let me know if you have any questions- sorry you're dealing with this. www.rockauto.com/en/moreinfo.php?pk=3588405&cc=1503985&jsn=893
@@Monkeychunks8690 thanks for the info.
Hi I have a 2011 equinox and mine is broke so I need a whole new arm but I took the bolt off and the arm piece won’t come off and we’ve tried everything even the pulled and it’s still on there
Ugh thats rough. If you have the time and patience and especially if its not on your car anymore, you could try a small cutting wheel on a Dremel and just try to split it from the post?
@@HowToEscapeDIYTipsandReviews unfortunately it was still on the vehicle but I did get it removed with a pulley thanks to my bf so thank you!
My wiper arm doesn’t fit enough for the bolt to pop thru to put the nut on any ideas?
Hey there Jeremy- not sure- what is your make and model for your vehicle? Do you have an Escape like we show in the video or is it a different vehicle? What kind of wiper arm did you get to be a replacement?
Will this work on a 2016 escape?
Hey there! Yes- it is the same approach on a 2016! Sorry for the delay in response time!
Need a puller for mine.
Hey there @John_Gorla- yeah that is tough, but it's better to wait for the right tool than try and force something- hope you either got it off by now or that the tool is on the way! Give a shout if you run into something else and hopefully we can help! have a great day!
The sad part is that anyone can come take these off... I've had mine stolen. Looking up how to replace. Thanks for the video!
why does it need to be glued down?
How do you make it aligned. It keeps going more down.
It sounds like your motor post got turned too far. Try taking the wiper arm off again. With the arm off and the post bare, press the button to operate the rear wiper and then let it stop in its intended home position. Then, reinstall your wiper arm and hold the arm when tightening the nut so that you don't turn the post again by accident. Basically a reset of the home position for the motor
I bought the puller tool and it slips off every time it gets tight any advice
Ok so you put the new wiper arm on there and tightened it and it still falls down? The puller tool should help it to come off but it shouldn't have any use afterwards, nor an effect on how the nut tightens back on the arm. Did you inspect the vertical splines inside the bushing on the plastic arm and the same style splines on the motor post? If those are worn away then yes it will loosen and fall down again. The splines are like gear teeth which hold the position of the arm to the motor when the nut is tightened down. They're critical. If thats not the case, then your motor may be bad and the post not able to hold position. The motor shaft should have a lot of resistance to it. If the nut is tight and the splines are holding and its still falling down, its likely your motor.
Thanks for the fast response. Ok so I’m still on the old wiper arm, I removed the strew but the arm is rusted so I bought exact puller to remove it, I’m having trouble removing old wiper arm
What if we don’t have the nut it’s nothing there but a hole how can I replace it
Hi! Are you talking the nut to Honda the arm to the motor post or the bushing inside the molded plastic arm?
How do I get the back windshield wiper plastic piece off that holds the blades so I can pull out the motor to see if the motor is bad cuz I know it's getting power and its trying to move because I hear it click and trying to go back into the resting position
Hi Nick, if you follow this video, you'll see the procedure to pull the arm. The motor is on the inside of the door / hatch and you pull the inside trim to access it. Please see our backup camera video for info on pulling the trim if you need a step by step. Your theory sounds correct on it possibly being bad if you're hearing noises but not seeing the correct motion :/ Good luck!
@@HowToEscapeDIYTipsandReviews thanks I figured it out myself but I have a bolt that was tightened too hard and only way to get it off is to shatter my back windshield but thank you for getting back to me
@@nicklandak6882 alright man you got it. Let us know if there's something else we can help with
@@HowToEscapeDIYTipsandReviews thank you I appreciate it you guys really helped out and you're about the only guys that reply to people who actually need help that's a good trait to have I'm going to subscribe and hit the like button
@@nicklandak6882 hey thank you so much, Nick! That is appreciated more than you know! Please let us know if there's anything else you're looking for and we will do our best. Grateful to have you as a subscriber!
It is the same process on all vehicles that have a rear wiper blade